User Guide

4 Replacement Procedures 4.5 HDD

4-14 Satellite M30 Maintenance Manual (960-455)

3. Push the tab of the HDD pack to the direction of the arrow and remove the HDD

pack. Be careful not to damage the connector.

NOTE: The following steps describe how to disassemble the HDD pack; however, do not

disassemble if the HDD is working properly.

4. Remove the following screws.

• M3×4S FLAT HEAD screw ×4

5. Remove the HDD bracket.

CAUTION: Do not apply pressure to the top or bottom of the HDD.

6. Remove the HDD from the aluminum laminate.

HDD

HDD bracket

4S FLAT HEAD

Aluminum laminate

Figure 4-5 Removing the HDD bracket and HDD