User Guide

7-12 Setup and Password Security User's Manual
Satellite Pro 4200/4300 User's Manual – 4200_UK.doc – ENGLISH – Printed on 27/01/00 as
IM_420UK
Panel Power On/Off
This option allows you to automatically turn your computer on or off by
opening or closing the display panel.
Second page of TSETUP
Configuration
This option allows you to set the configuration method.
I/O Ports
This option lets you specify the settings for the serial and parallel ports
and built-in modem. Use the Windows 95/98 Device Manager to change
these settings. Refer to your Windows 95/98 documentation.
Serial
This option allows you to set the COM level for the serial port.
The serial port interrupt request level (IRQ) and I/O port base address for
each COM level is shown below.
COM level I/O address Interrupt level
COM1 3F8H 4
(Default)
COM2 2F8H 3
COM3 3E8H 4
COM3 3E8H 5
COM3 3E8H 7
COM4 2E8H 3
COM4 2E8H 5
COM4 2E8H 7
Not used
(Disables port)
Others
(Other settings made automatically by
plug-and-play operating systems)
If the setting for the serial port is the same as that for the Built-in Modem
or Parallel port, the port(s) is set to Not Used or disabled.