User Guide

Getting Started

Adding memory (optional)

10 Locate an empty memory module slot on the underside of the

computer.

If no memory slot is available, you must remove a module by

performing steps 2-3 of “Removing a memory module” on page 59.

If your system has the memory modules stacked on top of one

another, you must remove the top module first before

removing/installing the bottom module.

For this model, Slot A is the bottom slot. Slot B is the top slot. If only

one memory module is to be installed, it must be installed in Slot A.

11 Pick up the memory module by its sides, avoiding any contact

with its connector. Position the module toward the socket,

aligning the connector’s notch with the matching key in the

socket.

(Sample Illustration) Aligning the memory module with the socket

NOTE

latch

key

notch

connector