User Manual

User’s Manual 9-7
Troubleshooting
LCD panel
Hard disk drive
Password
Problem Procedure
Lines appear broken. Check if you are in DOS mode. In DOS,
lines may appear broken, because of the LCD
screen’s higher resolution. The Windows display
should appear normal.
No display Press hotkeys Fn + F5 to change the display
priority, to make sure it is not set for an external
monitor.
Make sure instant security was not activated.
Try entering your password, if you have one
registered or turn the power off and back on to
clear instant security.
Problems above remain
unresolved or other
problems occur.
Refer to your software’s documentation to
determine if the software is causing the difficulty.
Contact your dealer if the problems continue.
Problem Procedure
Computer does not boot
from hard drive.
Insert a system diskette and reboot.
There may be a problem with your operating
system files. Refer to your operating system
documentation.
Slow performance Your files may be fragmented. Run SCANDISK
and defragmenter to check the condition of your
files and disk. Refer to your operating system
documentation or online HELP for information on
running SCANDISK and the defragmenter.
Contact your dealer if the problems continue.
Problem Procedure
Cannot enter
password
Refer to Chapter 6, Power and Power-Up Modes.