Manual

User’s Manual 7-3
HW Setup and Passwords
3. Click the OK button. The following message appears, allowing you to
verify the password.
Verify Password:
4. If character strings match, the password is registered click OK button.
If they do not match, the following message appears. You must repeat
from step 1.
Entry Error!!!
To delete a user password:
1. Select Not Registered to display the following prompt:
Enter Password:
2. Enter the currently registered password. The character string you enter
is displayed as a string of asterisks.
Enter Password: ****
3. Click the OK button. If the character string you enter matches the
registered password, the password option is reset and the display
changes to:
Not registered
If they do not match, the following message appears. You must repeat
step 1.
Incorrect Password!!!
You will not be able to access the password option in the HW Setup. In
this case you must turn the power off and back on to retry the proce-
dure.
4. Follow the same procedures described in the earlier section, How to set
the password, to set a new user password.
If you click the OK button before entering the password, Registered will
appear on the display.
If you enter the password incorrectly three times in a row, the computer
need to shut off.