User Guide

4 Replacement Procedures 4.2 Wireless LAN Card

4.2 Wireless LAN Card

Removing the Wireless LAN Card

Remove the wireless LAN card according to the following procedures and Figures 4-8 and 4-

CAUTION: Do not touch the connectors on the wireless LAN card and in the computer

with bare hands. Wireless LAN cards can fail if they are contaminated with sweat, natural

oils, etc. from your hands.

1. Turn the computer upside down.

2. Release the wireless LAN cover securing screw.

3. Remove the wireless LAN cover.

4. Disconnect the two antenna cables with the tweezers.

5. Spread out both the left and right stoppers for fixing the wireless LAN card until the

card can be raised.

6. Pull the wireless LAN card up and out at an angle.

Figure 4-8 Removing the wireless LAN card cover

4-18 EQUIUM M40/M45 / Satellite M40/M45 Maintenance Manual