® Satellite M30/M35 Series User’s Guide If you need assistance: ❖ Toshiba Global Support Centre Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see “If Something Goes Wrong” on page 161 in this guide. Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling.
Models: Satellite M30/M35 Series ReWritable CD/DVD Drives The computer system you purchased may include a ReWritable CD and/or DVD drive(s), among the most advanced data storage technologies available. As with any new technology, you must read and follow all set-up and usage instructions in the applicable user guides and/or manuals enclosed. If you fail to do so, this product may not function properly and you may lose data or suffer other damage.
YOU, AND NOT TOSHIBA, ASSUME FULL RESPONSIBILITY FOR SUCH USE. FCC Notice “Declaration of Conformity Information” This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Contact: Toshiba America Information Systems, Inc. 9740 Irvine Blvd. Irvine, CA 92618-1697 (949) 583-3000 Industry Canada requirement This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conformé à la norme NMB-003 du Canada. FCC requirements The following information is pursuant to FCC CFR 47, Part 68 and refers to internal modems. This equipment complies with Part 68 of the FCC rules.
Telephone Company Procedures The goal of the telephone company is to provide you with the best service it can. In order to do this, it may occasionally be necessary for them to make changes in their equipment, operations or procedures. If these changes might affect your service or the operation of your equipment, the telephone company will give you notice, in writing, to allow you to make any changes necessary to maintain uninterrupted service.
Alarm Equipment If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. Instructions for IC CS-03 Certified Equipment 1 NOTICE: The Industry Canada label identifies certified equipment.
3 The standard connecting arrangement (telephone jack type) for this equipment is jack type(s): USOC RJ11C. Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: ❖ The IEEE 802.11 Standard on Wireless LANs (Revision A/B), as defined and approved by the Institute of Electrical and Electronics Engineers.
In some situations or environments, the use of Wireless LAN may be restricted by the proprietor of the building or responsible representatives of the organization. These situations may for example include: ❖ Using the Wireless LAN equipment on board of airplanes, or ❖ In any other environment where the risk of interference to other devices or services is perceived or identified as harmful.
des fenetres afin de Fournier un ecram de blindage maximal. Si le matriel (ou son antenne d'emission) est installe a l'exterieur, il doit faire l'objet d'une licence. Europe – EU Declaration of Conformity ❖ This device complies with the essential requirements of the R&TTE Directive 1999/5/EC with essential test suites as per standards: EN 60950 Safety of Information Technology equipment ETS 300 328 Technical requirements for radio equipment ETS 300 826 General EMC requirements for radio equipment.
Anmeldung im Outdoor-Bereich notwendig, aber nicht genehmigungspflichtig. Bitte mit Händler die Vorgehensweise abstimmen. France: Restricted frequency band: only channels 10 and 11 (2457 MHz and 2462 MHz respectively) may be used in France. License required for every installation, indoor and outdoor installations. Please contact ART for procedure to follow. Bande de fréquence restreinte: seuls les canaux 10 à 11 (2457 MHz et 2462 MHz respectivement) doivent être utilisés en France.
Caution: Exposure to Radio Frequency Radiation The Toshiba Wireless LAN Mini PCI Card will be installed with one of two types of antennas. The both of antenna types, when installed are located at the upper edge of the LCD screen. For both antennas, the radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is far below the FCC radio frequency exposure limits.
Article 17 Any use of low power radio frequency electric machinery shall not affect the aviation safety and interfere with legal communications. In event that any interference is found, the use of such electric machinery shall be stopped immediately, and reusing of such products can be resumed until no interference occurs after improvement. The legal communications mentioned in the above item refer to radio communications operated in accordance with telecommunication laws and regulations.
It is possible to avoid the band of mobile object identification systems. 3.
❖ Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. ❖ Consult the dealer or an experienced radio/TV technician for help. Toshiba is not responsible for any radio or television interference caused by unauthorized modification of the devices included with this Toshiba Wireless LAN Mini PCI Card, or the substitution or attachment of connecting cables and equipment other than specified by Toshiba.
802.11a (5 GHz) Australia Austria Belgium Canada Denmark Finland France Germany Greece Ireland Italy Liechtenstein Luxembourg Netherlands New Zealand Norway Portugal Sweden Switzerland UK USA Turbo Mode (5 GHz) Canada USA Approved Countries/Regions for use for the Intel® PRO/ Wireless LAN 2100 3B Mini PCI Adapter This equipment is approved to the radio standard by the countries/regions in the following table.
Approved Countries/Regions for use for the Toshiba Mini PCI Wireless LAN Card This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table.
Bluetooth wireless technology is a new innovative technology, and TOSHIBA has not confirmed compatibility of its Bluetooth™ products with all PCs and/ or equipment using Bluetooth wireless technology other than TOSHIBA portable computers. Always use Bluetooth™ cards from TOSHIBA in order to enable wireless networks over two or more (up to a total of seven) TOSHIBA portable computers using these cards. Please contact TOSHIBA PC product support on Web site http://www.toshiba-europe.
In some situations or environments, the use of Bluetooth wireless technology may be restricted by the proprietor of the building or responsible representatives of the organization. These situations may for example include: ❖ Using the equipment with Bluetooth wireless technology on board of airplanes, or ❖ In any other environment where the risk of interference to other devices or services is perceived or identified as harmful.
❖ This device must accept any interference received, including interference that may cause undesired operation. Note that any changes or modifications to this equipment not expressly approved by the manufacturer may void the authorization to operate this equipment. Caution: Exposure to Radio Frequency Radiation The radiated output power of the Bluetooth™ Card from TOSHIBA is far below the FCC radio frequency exposure limits.
The legal communications mentioned in the above item refer to radio communications operated in accordance with telecommunication laws and regulations. Low power radio frequency electric machinery shall resist against interference from legal communications or from industrial, scientific and medical radio emission electric machinery. Using this equipment in Japan In Japan, the frequency bandwidth of 2,400 MHz to 2,483.
3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-13-1100 Direct Dial: 03-3457-5916 Fax: 03-5444-9450 Device Authorization This device obtains the Technical Regulation Conformity Certification, and it belongs to the device class of radio equipment of low-power data communication system radio station stipulated in the Radio Law of Japan.
Location of the required label (Sample shown below. Location of the label and manufacturing information may vary.) This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT.” To use this model properly, read the user’s guide carefully and keep it for your future reference. In case of any trouble with this model, please contact your nearest “AUTHORIZED service station.” To prevent direct exposure to the laser beam, do not try to open the enclosure.
Notice The information contained in this manual, including but not limited to any product specifications, is subject to change without notice. TOSHIBA CORPORATION AND TOSHIBA AMERICA INFORMATION SYSTEMS, INC. (TOSHIBA) PROVIDES NO WARRANTY WITH REGARD TO THIS MANUAL OR ANY OTHER INFORMATION CONTAINED HEREIN AND HEREBY EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE WITH REGARD TO ANY OF THE FOREGOING.
Computer disposal information This product contains mercury. Disposal of this material may be regulated due to environmental considerations. For disposal, reuse or recycling information, please contact your local government or the Electronic Industries Alliance at www.eiae.org. 5.375 x 8.375 ver 2.
Contents Introduction ..............................................................33 This guide ..............................................................34 Safety icons ...........................................................34 Other icons used ..............................................35 Other documentation .............................................35 Service options ......................................................36 Chapter 1: Getting Started .......................................
Contents Scrolling with the TouchPad™ .........................54 Control buttons ................................................54 Disabling or enabling the TouchPad ................55 Setting up your software ........................................56 Registering your computer with Toshiba ...............57 Setting up other devices ..................................57 Turning off the computer .......................................57 Closing the display panel .................................
Contents 27 Starting a program from the Run dialog box ...75 Saving your work ...................................................76 Printing your work .................................................78 Using the DVD-ROM or multi-function drive ..........79 CD/DVD control buttons ..................................81 Inserting compact discs ..................................82 Removing compact discs ................................84 Caring for CDs or DVDs Discs ........................85 Using PC Cards ..
Contents Changing batteries ...............................................107 Disposing of used batteries ...........................109 Conserving power ................................................109 Power profiles in Windows XP .......................110 Using a hot key to set the power profile .........111 Additional options for power ................................111 Chapter 4: Expansion Options ................................. 112 Devices for office computing ............................
Contents 29 Uploading and downloading files from the Internet .............................................130 Exploring audio features ......................................130 Playing an audio CD .......................................130 Playing CDs using Auto-Run ..........................132 Creating a CD .................................................132 Recording sounds ..........................................132 Using external speakers or headphones .........
Contents Mouse utility ...............................................153 Hotkey utility ...............................................154 Toshiba Hardware Settings ............................154 Enabling Hibernation ............................................156 Setting user passwords .......................................156 Using an instant password .............................157 Setting a user password ................................157 Disabling a user password .............................
Contents 31 Develop good computing habits ..........................183 If you need further assistance ..............................185 Before you call ...............................................185 Contacting Toshiba ........................................186 Other Toshiba Internet Web sites ........................187 Toshiba’s worldwide offices .................................187 Appendix A: Hot Keys ..............................................191 Volume Mute .................................
Contents Glossary ................................................................. 208 Index ....................................................................... 223 5.375 x 8.375 ver 2.
Introduction Welcome to the world of powerful, portable multimedia computing. With your Toshiba notebook computer, your work can accompany you wherever you go. Satellite® M30/M35 Series computers provide considerable computing power, enabling you to perform the most demanding computing tasks from any location. You will find your operating system, Microsoft® Windows® XP Home or Windows® XP Professional, already installed on your computer.
Introduction This guide This guide This guide introduces the computer’s features. You can: ❖ Read the entire guide from beginning to end ❖ Skim through and stop when a topic interests you ❖ Use the table of contents and the index to find specific information Safety icons This manual contains safety instructions that must be observed in order to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data.
Introduction Other documentation NOTE 35 Provides important information. Other icons used Additional icons highlight other helpful or educational information: TECHNICAL NOTE: This icon indicates technical information about the computer. HINT: This icon indicates helpful hints and tips. DEFINITION: This icon indicates the definition of a term used in the text. Other documentation Your computer comes with the following documentation. ❖ This electronic version of the user’s guide.
Introduction Service options ❖ The Microsoft® Windows® operating system documentation which explains the features of the operating system. Service options Toshiba offers a full line of service options built around its SelectServ™ limited warranty programs. For more information, visit Toshiba’s Web site at toshiba.com. If you have a problem or need to contact Toshiba, see “If Something Goes Wrong” on page 161. 5.375 x 8.375 ver 2.
Chapter 1 Getting Started This chapter provides tips for working comfortably, describes how to connect components, and explains what to do the first time you use your computer. Selecting a place to work Your computer is designed to be used in a variety of locations and situations. This section provides guidelines for setting up your computing environment.
Getting Started Selecting a place to work If you spill liquid into the computer, turn it off, unplug it from the AC power source and let it dry out completely before turning it on again. If the computer does not operate properly after you turn it back on, contact a Toshiba service representative or your network administrator. ❖ Equipment that generates a strong electromagnetic field, such as large stereo speakers (other than speakers that are connected to the computer) or speakerphones.
Getting Started Selecting a place to work 39 Placement of the computer Proper placement of the computer and external devices is important to avoid stress-related injuries. Consider the following when placing your computer. ❖ Place the computer on a flat surface at a comfortable height and distance. You should be able to type without twisting your torso or neck and look at the screen without slouching. ❖ If you use an external monitor, the top of the screen should be no higher than eye level.
Getting Started Selecting a place to work ❖ Position your chair so that the keyboard is at or slightly lower than the level of your elbow. You should be able to type comfortably with your shoulders relaxed and your forearms parallel to the floor. If you are using a conventional chair: ❖ Your knees should be slightly higher than your hips. If necessary, use a footrest to raise the level of your knees and ease the pressure on the back of your thighs.
Getting Started Other precautions 41 Work habits The key to avoiding discomfort or injury from strain is to vary your activities. If possible, schedule a variety of tasks into your working day. Finding ways to break up the routine can reduce stress and improve your efficiency. ❖ Take frequent, short breaks to change position, stretch your muscles, and relieve your eyes. A break of two or three minutes every half hour is more effective than a long break after several hours.
Getting Started Setting up your computer Some PC Cards can become hot with prolonged use. If two cards are installed, both can become hot even if only one is used extensively. Overheating of a PC Card can result in errors or instability in the PC Card operation. Be careful when you remove a PC Card that has been used for lengthy periods of time.
Getting Started Setting up your computer ❖ Connect a local printer ❖ Install PC Cards 43 Connecting to a power source Your computer requires power to operate. Use the power cable and AC adapter to connect the computer to a live electrical outlet, or to charge the computer’s battery. AC adapter Power cable Sample power cable and AC adapter Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.
Getting Started Setting up your computer Use only the AC adapter supplied with your computer or an equivalent adapter that is compatible. Use of any incompatible adapter could damage your computer. Toshiba assumes no liability for any damage caused by use of an incompatible adapter. When you connect the AC adapter to the computer, always follow the steps in the exact order as described in the User's Manual.
Getting Started Setting up your computer Connecting the AC adapter to the computer 3 Connect the power cable to a live electrical outlet. If the electrical outlet is live, the system indicator panel’s AC power light ( ) glows blue.
Getting Started Adding memory Charging the battery Your computer came with its battery already installed. Before using the battery to power the computer, you must charge it. To charge the battery, leave the computer plugged in to an AC power source for at least three hours with the computer turned off. After that, the battery will be completely charged and ready to power the computer.
Getting Started Adding memory 47 Installing a memory module Additional memory modules can be installed in the memory expansion slots on the base of the computer. You will need a standard Phillips no.1 screwdriver for this procedure. To avoid damaging the computer’s screws, use a standard Phillips no. 1 screwdriver that is in good condition. Installing a memory module with the computer’s power on may damage the computer, the module, or both.
Getting Started Adding memory Memory module cover Locating the memory slot cover 6 Using a standard Phillips no. 1 screwdriver, unscrew the screw that secures the memory slot cover, then remove the memory slot cover. Removing the memory module cover 7 Place the screw and the cover in a safe place so that you can retrieve them later. 5.375 x 8.375 ver 2.
Getting Started Adding memory 49 Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up. To avoid damaging the memory module, be careful not to touch its pin connector on the side you insert into the computer. 8 Remove the new memory module from its antistatic packaging. 9 Holding the memory module by its edges so that the gold connector bar faces the slot, fit the module into the socket.
Getting Started Adding memory Avoid touching the connectors on the memory module or on the computer. Grease or dust on the connectors may cause memory access problems. 11 Replace the cover plate and the screw. 12 Turn the computer over and restart it. You can now continue setting up the computer. When the operating system has loaded, you can verify that the computer has recognized the additional memory.
Getting Started Adding memory 2 51 Pull the clips away from the memory module. The memory module pops partially out of the slot. 3 Carefully remove the module from the slot. Removing the memory module 4 Replace the cover plate and screws. 5 Turn the computer over and restart it. Checking total memory When you add or remove memory, you can check that the computer has recognized the change. To do this: 1 Click Start, then click Control Panel. 2 Click Performance and Maintenance. 3 Click System.
Getting Started Turning on the computer Turning on the computer The computer is now ready for you to turn it on and begin using it. Opening the display panel 1 Slide the display latch to the right. 2 Lift the display panel. To avoid damaging the display panel, do not force it beyond the point where it moves easily, and never lift the computer by the display panel. Small bright dots may appear on your TFT display when you turn on your computer.
Getting Started Using the TouchPad™ 53 Turning on the power 4 The preinstalled operating system will load automatically. When you turn on the computer for the first time, do not turn off the power again until the operating system has loaded completely. Using the TouchPad™ The TouchPad, the small, smooth square cutout located in front of the keyboard, is sensitive to touch and enables you to move the cursor with the stroke of a finger.
Getting Started Using the TouchPad™ ❖ To move it to the left side, slide your finger from right to left. NOTE Because the TouchPad is much smaller than the display screen, moving your cursor across the screen often means having to move your finger several times across the TouchPad in the preferred direction. Once you’ve positioned your cursor, you can either click it into place by double-tapping the TouchPad or clicking the control buttons.
Getting Started Using the TouchPad™ 55 Disabling or enabling the TouchPad The TouchPad is enabled by default. To change the enable/ disable TouchPad setting: 1 Click Start, Control Panel. The Control Panel window appears. 2 Click Printers and Other Hardware. 3 Click the Mouse icon. 4 Click the TouchPAD ON/OFF tab. The TouchPAD ON/OFF tab view window appears. 5 Select Disable or Enable, whichever is appropriate. 6 Click Apply. 7 Click OK. The Mouse Properties window closes.
Getting Started Setting up your software You can also use a hot key to disable or enable the TouchPad. See “Disabling or enabling the TouchPad” on page 196. Setting up your software The first time you turn on your computer, the Setup Wizard guides you through steps to set up your software. 1 From the welcome screen, click Next to enter the Setup Wizard. 2 Confirm acceptance of Microsoft’s End User License Agreement and click Next. 3 Enter the computer name and description, and click Next or Skip.
Getting Started Registering your computer with Toshiba 7 57 Enter your name and click Finish to complete the process. Your computer restarts automatically. Registering your computer with Toshiba To register your computer with Toshiba at a time later than when you first start your computer, you may also click on the desktop icon to do so electronically. Setting up other devices You may want to take this time to set up your printer. For more information, see “Setting up your printer” on page 115.
Getting Started Using external display devices commands to save your system settings to memory so that, when you turn on the computer again, you will automatically return to where you left off. ❖ To leave the computer off for a longer period, you can use the Windows Turn Off command when not connected to a domain server or the Shut down when connected to a domain server instead. Never turn off the computer while any drive is in use. Doing so may damage the media in use and result in loss of data.
Getting Started Using external display devices 59 TECHNICAL NOTE: In the Windows® XP operating system, you do not need an Internet connection to watch cable or broadcast TV, but you must purchase a compatible TV tuner card. ❖ A video display device, such as a video projection unit, via the video-out port. ❖ An external monitor or projector via the RGB (monitor) port. ❖ A video display device via the S-Video port.
Getting Started Using external display devices Using a poor quality cable may result in a dull or fuzzy picture, poor color, ghosting, video noise, or loss of video. Connecting to the video-out port NOTE Video cables are not included with your computer. To connect a device to the video-out port, you will need to purchase an Svideo cable. To connect the device: 1 Connect one end of the video cable to the external video device.
Getting Started Using external display devices 61 Connecting an external monitor or projector You can easily attach an external monitor or projector to your computer if you need a larger screen. To do this: 1 Connect the monitor’s video cable to the RGB (monitor) port on the back of the computer. 2 Connect the device’s power cable to a live electrical outlet. 3 Turn on the external device. 4 Set the display mode by pressing Fn + F5, or by setting the Display Properties settings.
Getting Started Using external display devices TECHNICAL NOTE: You can also change these settings using the Display Properties Box. Set the option for the video controller by clicking Start, then Control Panel and clicking Display. Choose the Settings tab, click the Advanced button, select Display Device, select the applicable Monitor type, click Apply or OK. For more information on switching the display output, see “Directing the display output when you turn on the computer” on page 61.
Getting Started Using an external keyboard 63 Using an external keyboard If you prefer to use a full-size keyboard, you can attach one to your computer. The computer’s USB port supports any USBcompatible keyboard. Using a mouse You may want to use a mouse instead of the computer’s builtin TouchPad. You can use a USB-compatible mouse. NOTE After logging on to your system, the mouse cursor may move to the upper-right side of the screen.
Getting Started Connecting a local printer NOTE You must supply the proper printer cable. If one did not come with your printer, you may purchase one from an electronics or computer store. If your printer is ECP- or IEEE-compliant, make sure your printer cable is an IEEE 1284 cable. These instructions assume you have a parallel printer. If you have a USB printer, consult the document that came with your printer. To connect the printer: 1 If the computer is on, turn it off.
Getting Started Connecting an optional external diskette drive 65 Connecting an optional external diskette drive Some operations, such as creating a password service diskette, require a diskette drive designed for use with 3.5inch diskettes. An optional external USB diskette drive To connect an optional external USB diskette drive, connect the cable to one of the USB ports. Connecting an optional external USB diskette drive 5.375 x 8.375 ver 2.
Getting Started Connecting external speakers or headphones Connecting external speakers or headphones To attach an external stereo output device: 1 Locate the headphone jack near the front of the right side of the computer. 2 Using any necessary adapters, plug the cable from the external audio device into the headphone jack. The headphone jack requires a 3.5-mm, 16-ohm stereo jack. When the headphone is inserted, the internal speakers are automatically disabled.
Chapter 2 Learning the Basics This chapter gives some computing tips and provides important information about basic features. Computing tips ❖ Save your work frequently. Your work stays in the computer’s temporary memory until you save it to the disk. If the network you are using goes down and you must restart your computer to reconnect, or your battery runs out of charge while you are working, you will lose all work since you last saved. See “Saving your work” on page 76 for further information.
Learning the Basics Computing tips ❖ Back up your files to disks (or other removable media) on a regular basis. Label the backup copies clearly and store them in a safe place. It’s easy to put off backing up because it takes time. However, if your hard disk suddenly fails, you will lose all the data on it unless you have a separate backup copy. ❖ Use Error-checking and Disk Defragmenter regularly to conserve disk space and improve performance. ❖ Scan all new files for viruses.
Learning the Basics Using the keyboard 69 Using the keyboard Your computer’s keyboard contains character keys, control keys, function keys, and special Windows® keys, providing all the functionality of a full-size keyboard. Keyboard Character keys Typing with the character keys is very much like typing on a typewriter, except that: ❖ The space bar creates a space character instead of just passing over an area of the page. ❖ The lowercase letter l (el) and the number 1 are not interchangeable.
Learning the Basics Using the keyboard programs assign separate functions to the right and left Ctrl and Alt keys, or to the regular and numeric pad Enter keys on the full-sized keyboard. Using the Fn key you can simulate these separate keys, as follows: ❖ Press Fn and Ctrl simultaneously to simulate the Ctrl key on the right side of the enhanced keyboard. ❖ Press Fn and Enter simultaneously to simulate the Enter key on the numeric pad of the enhanced keyboard.
Learning the Basics Using the keyboard 71 Windows special keys Start key Application key The Windows special keys Your computer’s keyboard has two keys that have special functions in Windows: ❖ Start key—Opens the Start menu ❖ Application key—Has the same function as the secondary mouse (or AccuPoint II) button Overlay keys The keys with gray numbers and symbols on the front of them form the numeric and cursor overlay.
Learning the Basics Using the keyboard Using the overlay to type numeric data The keys with the numbers on their right front are the numeric overlay keys. To turn the numeric overlay on, press Fn and F11 simultaneously. The numeric mode light on the keyboard indicator panel glows when the numeric overlay is on. You can still use the overlay keys to type alphabetic characters while the numeric overlay is on. To do so: ❖ For lowercase letters, hold down Fn while you type the letters.
Learning the Basics Starting a program ❖ 73 For uppercase letters, hold down both Fn and Shift while you type the letters. To use the numeric overlay keys while the cursor control overlay is on: ❖ Hold down Shift while you use the numeric overlay keys. ❖ To return to the cursor control overlay, release Shift. To disable the cursor control overlay, hold down the Fn key and press F10 again. The cursor control mode light on the keyboard indicator panel goes out.
Learning the Basics Starting a program The Windows® XP operating system displays the All Programs menu, which lists programs and program groups. If your program is listed, go to Step 3, otherwise, continue with Step 2. 2 Point to the program group, in this example, Accessories. The Accessories menu is displayed. 3 Click the program, in this example, WordPad. WordPad opens. To close the program, click the Close button in the upper-right corner of the program’s window.
Learning the Basics Starting a program 75 window shows all the folders contained within the Program Files folder. 6 In the left part of the window, click Windows NT. 7 Click Accessories. Windows® Explorer shows the contents of the Accessories folder on the right side of the window. 8 In the right part of the window, double-click WordPad. The operating system opens WordPad. To close the program, click the Close button in the upper-right corner of the program’s window.
Learning the Basics Saving your work ❖ If you do not know the location, click Browse.... In the Browse dialog box, enter the file name (for example, wordpad.exe) and select the drive to search. When the operating system has found the file, click Open. HINT: To run the same program again, click the arrow to the right of the text box and select the command line from the drop-down list. Saving your work Before you turn off the computer, save your work on the hard disk drive or a diskette.
Learning the Basics Saving your work 77 Use this dialog box to specify where to store the document and to give it a file name. A sample Save As dialog box 2 Choose the drive and folder where you want your file to be stored. 3 Type a file name, then click Save. HINT: To make another copy of the file you are currently working with, choose Save As from the File menu and give the new file a different name.
Learning the Basics Printing your work You may use all the letters and numbers on the keyboard plus these characters: _ ^ $ ~ ! # % & { } ( ) @ and ‘. MS-DOS® file names are not case-sensitive and must not contain spaces. Using a file extension Most programs assign an extension to the file name that identifies the file as being created in the program with a particular format. For example, Microsoft® Word saves files with a .doc extension. Any file name with an extension of “.
Learning the Basics Using the DVD-ROM or multi-function drive 79 A sample Print dialog box 3 Specify the print parameters. For example, the range of pages and number of copies to print. 4 Click Print. Using the DVD-ROM or multi-function drive Optical storage has become the preferred medium for software, music, and video. Digital versatile discs (DVDs) provide a significant increase in data storage and support features that are not available on any other video platform.
Learning the Basics Using the DVD-ROM or multi-function drive TECHNICAL NOTE: Your DVD-ROM or multi-function drive is set to play region 1 (North America) DVD-ROMs. If you play a DVD disc from another region, the drive will automatically change to play in the format of the other region. The drive will allow you to change regions four times. On the fourth change, the region will be “locked in.” That is, the drive will only play DVDs from that last region.
Learning the Basics Using the DVD-ROM or multi-function drive Never use a pencil to press the eject button. Pencil lead can break off inside the computer and damage it. CD/DVD control buttons The control buttons on the front edge of the computer let you play audio CDs when the computer is off. You can also use them to play CDs and DVDs when the computer is on.
Learning the Basics Using the DVD-ROM or multi-function drive CD/DVD control and digital audio modes The following chart describes CD/DVD control and digital audio modes. CD/DVD Mode Power is off and you If a CD is in the press Play/Pause drive, the system enters CD player mode and operates as a stand-alone CD player. Digital Audio Mode The operating system starts, the Media Player starts and the digital audio file begins to play.
Learning the Basics Using the DVD-ROM or multi-function drive 83 The disc tray slides partially out of the drive (about 1 inch). HINT: The drive will not open if the computer’s power is off. 4 Grasp the tray and pull it fully open. The drive tray fully extended 5 Hold the disc by its edges and check that it is free of dust. If the disc is dusty, clean it as described in “Caring for CDs or DVDs Discs” on page 85. 6 Place the disc carefully in the disc tray, label side up.
Learning the Basics Using the DVD-ROM or multi-function drive 7 Gently press the disc onto the center spindle until you feel it click into place. Handle DVDs and CDs carefully, making contact only with the center hole and edge. Do not touch the surface of the disc. Do not stack discs. If you incorrectly handle the discs, you could lose data. 8 Make sure the disc is completely on the spindle and is lying flat on the tray. If you insert the disc incorrectly, it may jam the drive.
Learning the Basics Using the DVD-ROM or multi-function drive 85 To remove a compact disc with the computer turned off: 1 Insert a slender object, such as a straightened paper clip, into the manual eject hole. 2 Gently pull the tray out until it is fully open, remove the disc, and place it in its protective cover. 3 Gently push the tray in to close it. Caring for CDs or DVDs Discs ❖ Store your discs in their original containers to protect them from scratches and keep them clean.
Learning the Basics Using PC Cards Using PC Cards TECHNICAL NOTE: For PCMCIA-compatible PC Cards, check the package to make sure they conform to the PCMCIA 2.1 standard (or later). Other cards may work with your computer, but are likely to be much more difficult to set up and use. For information on inserting or removing a PC Card, see “Inserting and removing PC Cards” on page 138. Hot swapping With PC Cards, you can replace one PC Card with another while the computer is on.
Learning the Basics Using SD (Secure Digital) cards ® 87 Using SD® (Secure Digital) cards If you do not already have a SD card inserted in the computer, you may do so following the procedures outlined in “Inserting an SD® card” on page 140. Important: Do not use the Copy Disk function for SD cards. In order to copy data from one SD card to another, use the following procedure: 1 Format the target SD card in the same format as the source SD card. 2 Insert the source SD card.
Learning the Basics Using a computer lock Using a computer lock For your own peace of mind, you may want to secure your computer to a heavy object such as your desk. The easiest way to do this is to purchase an optional PORT-Noteworthy® Computer Lock Cable. PORT-Noteworthy® Computer Lock Cable To secure the computer: 1 Loop the cable through or around some part of a heavy object. Make sure there is no way for a potential thief to slip the cable off the object.
Learning the Basics Caring for your computer 89 Caring for your computer This section gives tips on cleaning and moving your computer. For information about taking care of your computer’s battery, see “Running the computer on battery power” on page 100. Cleaning the computer Keep liquids, including cleaning fluid, out of the computer’s keyboard, speaker, and other openings. Never spray cleaner directly onto the computer. Never use harsh or caustic chemical products to clean the computer.
Learning the Basics Backing up your work Backing up your work Your computer comes with Recovery media that enable you to reinstall software that was preinstalled. This media can be used to install or reinstall particular Toshiba applications, utilities, and drivers. Back up all the files you create in case something happens to your computer. If you have a network partition, you can hold copies of your files there.
Learning the Basics Preparing for communications 91 Preparing for communications To connect to the Internet, use an online service, or communicate across the telephone lines with another computer, you need: ❖ A modem (supplied with your computer) ❖ A telephone line ❖ A browser or communications program ❖ An Internet Service Provider (ISP) or an online service if you plan to use the Internet Before you can use the modem, you must connect it to a standard voice-grade telephone line.
Learning the Basics Powering down the computer Using Turn Off Computer or Shut Down For the Windows XP Home operating system, follow these steps to shut down the computer: 1 Click Start, select Turn off computer. The Turn off computer dialog box appears. Sample Turn off computer Windows dialog box 2 Click Turn Off. The computer shuts down completely. For the Windows XP Professional operating system, follow these steps to shut down the computer: 1 Click the Start button, then Shut down.
Learning the Basics Powering down the computer 93 Shutting down more quickly In addition, you can shut down the computer by pressing the power button. To use either of these methods, you first need to turn it on in Toshiba’s Power Saver utility. 1 Open the Start menu, click Control Panel, then Performance and Maintenance. 2 Click the Toshiba Power Saver icon. 3 Click on the Setup Action tab. 4 Select the options you want from the drop-down lists.
Learning the Basics Powering down the computer NOTE For more information about the Power Saver utility, see “Power Management” on page 151. Starting again after Shut down To start the computer up again, press the power button until the on/off light changes to blue. If you shut down the computer by closing the display panel, you can start it again by opening the display panel.
Learning the Basics Powering down the computer ❖ 95 When starting up again, the computer returns to the mode in which you left it, including all open programs and files you were using Configuring your computer for Hibernation 1 Open the Start menu, click Control Panel then Performance and Maintenance. 2 Click the Toshiba Power Saver icon. 3 Click the Setup Action tab. 4 Select Hibernation for the options you want.
Learning the Basics Powering down the computer Starting again from Hibernation mode To start up the computer from Hibernation mode, press the power button until the on/off light turns blue. The computer returns to the screen you were using. If you put the computer in Hibernation mode by closing the display panel, you can start it again by opening the display panel. Using Standby The Standby command puts the computer into a powersaving mode.
Learning the Basics Powering down the computer 97 Sample Turn off computer Windows® dialog box NOTE If you hold down the Shift key, Stand By becomes Hibernate in the Turn off computer dialog box. To enter hibernation mode, you must hold down the Shift key while you select Hibernate. The computer saves the status of all open programs and files, turns off the display, and goes into a low-power mode. The on/off light blinks amber indicating the machine is in Standby mode.
Learning the Basics Toshiba’s online resources ❖ When I press the power button Set this option to Standby to put the computer into Standby mode when you press the power button. ❖ When I close the lid Set this option to Standby to put the computer into Standby mode when you close the display panel. 5 Click Apply. 6 Click OK. NOTE For more information about the Power Saver utility, see “Power Management” on page 151.
Chapter 3 Mobile Computing Toshiba’s energy-saver design Your computer enters a low-power, standby mode when it is not being used, thereby conserving energy and saving money in the process. It has a number of other features that enhance its energy efficiency. Many of these energy-saving features have been set by Toshiba. We recommend you leave these features active, allowing your computer to operate at its maximum energy efficiency, so that you can use it for longer periods of time while traveling.
Mobile Computing Running the computer on battery power Running the computer on battery power The computer contains a removable Lithium-Ion (Li-ion) battery pack that provides power when you are away from an AC outlet. This is the main battery. You can recharge it many times. TECHNICAL NOTE: For optimum DVD performance, always play DVDs while your computer is connected to AC power.
Mobile Computing Running the computer on battery power 101 The main battery light ( ) glows amber while the battery is being charged, and glows blue when it is fully charged. The battery may not start charging immediately under the following conditions: ❖ The battery is extremely hot or cold. To ensure that the battery charges to its full capacity, wait until it reaches room temperature. ❖ The battery is almost completely discharged.
Mobile Computing Running the computer on battery power 5 Charge the battery pack until the Battery LED glows blue. ❖ If you have extra battery packs, rotate their use. ❖ If you will not be using the system for an extended period, more than one month, remove the battery pack. ❖ Disconnect the AC adapter when the battery is fully charged. Overcharging makes the battery hot and shortens life. ❖ If you are not going to use the computer for more than eight hours, disconnect the AC adapter.
Mobile Computing Running the computer on battery power 103 The computer’s RTC battery is a Lithium Ion (Li-Ion) battery and should be replaced only by your dealer or by a Toshiba service representative. The battery can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations. The main battery light ( ) glows amber while the battery is being charged, and glows blue when it is fully charged.
❖ Mobile Computing Running the computer on battery power Flashing amber indicates that the computer is using battery power, and the battery’s charge is running low. HINT: Be careful not to confuse the battery light ( ) with the on/off light ( ). When the on/off light flashes amber, it indicates that the system is suspended (using Windows® XP Standby command). Displaying remaining battery power You can monitor the battery’s remaining charge.
Mobile Computing Running the computer on battery power 105 Sample Toshiba Power Saver Properties Dialog Box The remaining battery charge is indicated on the top left side of the dialog box. With repeated discharges and recharges, the battery’s capacity will gradually decrease. A frequently used older battery will not power the computer for as long as a new battery, even when both are fully charged.
Mobile Computing What to do when the battery alarm sounds The computer drains battery power more quickly at low temperatures. Check your remaining charge frequently if you’re working in temperatures below 50 degrees Fahrenheit. The Windows® operating system has additional power management options that can be accessed through an icon in the Control Panel. For more information, see “Power Management” on page 151.
Mobile Computing Changing batteries 107 Changing batteries When handling battery packs, do not drop or knock them. Also be careful not to damage the casing or short-circuit the terminals. To change the battery: 1 Save your work. 2 Shut down and turn off the computer. 3 Remove all cables connected to the computer. 4 Turn the computer over. 5 If the battery lock is in the locked position, slide it toward the unlocked position. 6 Slide the battery release latch to release the battery.
Mobile Computing Changing batteries Removing the discharged battery If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately following the advice in “Disposing of used batteries” on page 109. 8 Wipe the terminals of the charged battery with a clean cloth to ensure a good connection. 9 Insert the charged battery into the slot until the latch clicks. The battery pack has been designed so that you cannot install it with reverse polarity.
Mobile Computing Conserving power 109 Disposing of used batteries The life of a battery pack should last for years. When the battery pack needs replacing, the main battery light flashes amber shortly after you have fully recharged the battery. You must discard a battery if it becomes damaged. The computer’s main battery is a Lithium-Ion (Li-Ion) battery, which can explode if not properly replaced, used, handled, or disposed of.
Mobile Computing Conserving power There are various ways in which you can conserve power and extend the operating time of your battery: ❖ Enable Standby or Hibernation, which saves power when you turn off the computer and turn it back on again. ❖ Use Toshiba’s power-saving options. These power-saving options control the way in which the computer is configured. By using them, you can greatly increase the length of time you can use the computer before you need to recharge the battery.
Mobile Computing Additional options for power 111 Using a hot key to set the power profile You may use a hot key to set the power profile. To set the power profile: 1 Press Fn and F2 simultaneously to display the power profile pop-up window. Sample Power Profile mode pop-up window 2 While continuing to press Fn, press F2 until you select the desired power profile. The power profile options are: Full Power, High Power, Normal, DVD Playback, Presentation, and Long Life. 3 Release the Fn key.
Chapter 4 Expansion Options Your computer is designed to work in the office as well as on the road. This chapter explains how to set up the various optional devices so that your notebook can provide all the convenience of a traditional desktop computer. Devices for office computing By connecting optional devices such as an external monitor, a full-size keyboard and a mouse, you can work with your notebook as if it were a standard office computer.
Expansion Options Using an external keyboard 113 The devices manufactured by Toshiba can be purchased through Toshiba’s Web site: toshiba.com, or through the accessories information packaged with your computer. Connecting external (optional) devices You can connect an external monitor through the video-out port on the back of your computer. Using an external keyboard If you prefer to use a full-size keyboard, you can attach one to your computer.
Expansion Options Using a printer You also need a suitable printer cable, which may have been provided with your printer. If not, your company may keep a stock of cables. Otherwise, you can purchase one from a computer or electronics store. TECHNICAL NOTE: If your printer is ECP- or IEEE-compliant, make sure your printer cable is an IEEE 1284 cable. Connecting a parallel printer Parallel printers are the most common type of printer in use today. These instructions assume you have a parallel printer.
Expansion Options Using a printer 115 Setting up your printer Setting up a printer involves selecting a printer driver. This special program acts as a translator that turns your document into a form the printer can understand. If you are using any non-Windows® programs, set up a printer driver for each of those programs. Refer to your program’s documentation for more information.
Expansion Options Using a printer Sample Add Printer Wizard dialog box 3 Click Next. The Add Printer Wizard asks you to select your printer. TECHNICAL NOTE: If your printer is Plug and Play, the Windows® XP operating system recognizes it automatically. You can ignore the remainder of this section. See your printer manual. 4 5 If the printer you are setting up: ❖ Is not connected to a network, select Local printer attached to this computer.
Expansion Options Using a printer 6 117 Select the port settings according to the instructions in your printer’s documentation and the port to which your printer is connected, then click Next. The wizard prompts you to select your printer. 7 From the list of manufacturers and printers, select your printer, then click Next. The Add Printer Wizard prompts you to enter a “friendly” printer name. 8 Enter a name for your printer.
Expansion Options Using the Wi-Fi® Wireless LAN Mini PCI module TECHNICAL NOTE: Some printers require a specific installation process. In this case, the Windows® XP operating system Add Printer Wizard will display an error message. If this happens, refer to your printer installation guide for further instructions. Using the Wi-Fi® Wireless LAN Mini PCI module Your computer may have an integrated Wi-Fi Wireless LAN Mini PCI module.
Chapter 5 Enhancing Productivity In this chapter, you will explore some of the special features of your Satellite® Series notebook computer. Exploring the desktop The desktop is the launching pad for everything you can do in the Windows® XP Home or XP Professional operating system. You use its features to start programs, find documents, set up system components, and perform most other computing tasks.
Enhancing Productivity Exploring the desktop Icons Start button Taskbar System tray Sample Windows® XP operating system desktop Icons An icon represents a folder, file, or program that can be quickly activated by double-clicking the icon. You can create a new desktop icon for any folder, file, or program by dragging the element’s icon from its location in a window to the desktop area. The icons initially displayed on your system desktop include: Recycle Bin — Holds files you have deleted.
Enhancing Productivity Exploring the desktop 121 Internet Explorer — The Microsoft® browser that provides access to the Internet. NOTE If you place the cursor over an icon, a popup description of the file contents appears. Your desktop may contain other icons depending on your configuration. See Windows® XP online help for more specific information on each icon and how to use it.
Enhancing Productivity Exchanging data with another computer You can personalize the taskbar to include not only shortcut icons but also your favorite Internet URL addresses. DEFINITION: URL stands for Uniform Resource Locator, which is the address that defines the route to a file on the Web or any other Internet facility. Generically, it is known as the Web site address. System tray The System tray displays icons of tasks or programs that run continuously in the background.
Enhancing Productivity Exchanging data with another computer 123 3 Set any specific options. 4 Start the transfer. 5 When you have finished transferring files, close the programs on both computers. Getting help transferring files 1 Click Start, then Help and Support. 2 Click the Index icon on the toolbar. 3 In the dialog box, type direct cable connection. 4 Follow the online guide instructions.
Enhancing Productivity Exchanging data with another computer If you’re having trouble connecting through the modem, you may need to determine the current COM port name and possibly change it. To find out which port your modem is connected to: 1 Open the Start menu, click Control Panel. 2 Click Phone and Modem Options. The Phone and Modem Options Properties dialog box displays. 3 Click the Modems tab. Your modem should be listed next to one of the computer’s COM ports.
Enhancing Productivity Exchanging data with another computer 125 Connecting your computer to a network You can connect your computer to a network to increase its capabilities and functionality using one of its communication ports. Accessing a network To access a network: ❖ At the office, connect an Ethernet cable to the RJ45 jack on your computer. For specific information about connecting to the network, consult your network administrator.
Enhancing Productivity Exchanging data with another computer minutes as it waits for a reply. To avoid this delay, you can reconfigure Windows to disable the LAN port. To disable the LAN port: 1 Click Start, click Control Panel then Performance and Maintenance. 2 Click the System icon, then click the Hardware tab, and then click the Device Manager button. 3 Select Intel® Pro/100 VE Network Connection in Network adapters. 4 Click Actions. 5 Select the Properties icon.
Enhancing Productivity An overview of using the Internet 127 walls and floors) of the wireless transmission is up to 100 feet. To use your wireless communication, flip the wireless on/off switch to the On position.
Enhancing Productivity An overview of using the Internet designed to work with HTTP. They make it easier to connect to a particular network address and send and receive information. Internet Service Providers To connect a computer directly to the Internet, many people and businesses use an Internet Service Provider (ISP). An ISP is a company that has the equipment and the telecommunication lines necessary to maintain an Internet connection.
Enhancing Productivity An overview of using the Internet 129 If you are using your computer at the office, then you probably connect to the Internet through your company’s network. See your network administrator about connecting to the Internet. Surfing the Internet Once connected to the Internet, the Web browser displays a home page, for example, your ISP’s home page on the Internet or your company’s Web site home page. To visit a desired Web site, type in the Web address.
Enhancing Productivity Exploring audio features A news group is similar to a chat room, but instead of using a dedicated site to converse about a specialized subject with others in real-time, it uses a Web site as a clearinghouse where all the messages are placed, like a gigantic bulletin board. ❖ Online shopping Many Web sites offer products and services for sale.
Enhancing Productivity Exploring audio features 131 To access the Windows Media™ Player, you can open it through the Start menu or activate it from the taskbar. NOTE When using Windows Media Player, your system may not be able to activate Standby or Hibernation modes. To prevent this from occurring, close Windows Media Player before you select Standby or Hibernation mode.
Enhancing Productivity Exploring audio features Playing CDs using Auto-Run If you insert a CD into the DVD-ROM/multi-function drive and the Auto-Run feature does not automatically start your disk, try launching the CD manually. To do this, follow these steps: 1 Open the Start menu and select My Computer. 2 Click the DVD-ROM/multi-function drive icon. The disk drive will run the CD. If your disk does not run using this method, try using an application that is associated with the media on the disk.
Enhancing Productivity Exploring audio features 133 in microphone located to the left of the CTRL key on the keyboard. DEFINITION: A .wav (pronounced “wave”) file is a Windows® format for storing sound. TECHNICAL NOTE: If you record MP3 files, you will only be able to play them on a device capable of playing MP3 files. Using a microphone 1 Connect an external microphone to the computer. 2 Click Start, point to All Programs, Accessories, Entertainment, then click Sound Recorder.
Enhancing Productivity Exploring audio features The Sound Recorder window displays the new sound file as a waveform. NOTE You can only record 60 seconds at a time. 6 To hear what you just recorded, click the Play button. 7 To save the file, select Save from the File menu. Adjusting recording quality The better the quality of the recording, the more disk space the sound file requires. Experiment to find a balance that fits your needs. 1 Open Sound Recorder, if necessary.
Enhancing Productivity Exploring audio features 135 Using external speakers or headphones Your computer is equipped with a full stereo sound system with internal speakers. Instead of using the internal speakers, you can connect headphones or a pair of external stereo speakers. TECHNICAL NOTE: Use amplified speakers that require an external power source. Other types of speakers will be inadequate to produce sound from the computer.
Enhancing Productivity Inserting and removing hard drives Inserting and removing hard drives Your Satellite® M30/M35 can use various hard drive capacities. Depending upon the original hard drive installed in your computer, you may wish to increase storage capacity by changing the internal drive, or you can also add additional hard drive space by inserting a drive into the select bay module. To change the internal hard drive: 1 Shut down your computer completely using the Shut Down command.
Enhancing Productivity Inserting and removing hard drives 7 137 Grasp the edge of the hard drive and pull it toward the edge of the computer, then lift it straight up to remove it. Removing the hard drive from the computer 8 Install the new hard drive by setting it into the hard drive slot and sliding back toward the center of the computer until it locks. Do not force the drive into the computer.
Enhancing Productivity Inserting and removing PC Cards Inserting and removing PC Cards Your Satellite® M30/M35 Series computer comes with one PC Card slot and supports two types of PC Cards: ❖ Type I cards—You can install one of these cards, one in each slot. ❖ Type II cards—You can install one of these cards, one in each slot. Inserting a PC Card NOTE Use caution when lifting or turning your computer.
Enhancing Productivity Inserting and removing PC Cards 3 139 Insert the PC Card. Inserting a PC Card 4 When the card is almost all the way into the slot, push firmly, but gently, to ensure a firm connection with the computer. Do not force the card into position. Removing a PC Card Stop the PC Card by clicking the Safely Remove Hardware icon on the System tray. After the PC Card is stopped, it is safe to remove. 1 Locate the PC Card ejection button.
Enhancing Productivity Using SD® cards The PC Card ejects slightly from the slot. 3 Grasp the edges of the PC Card and slide it out of the slot. Inserting and removing Wi-Fi® modules Your system may come with an optional Wi-Fi module. If you wish to insert or remove a Wi-Fi module, contact a Toshiba Wireless Authorized Service Provider. Setting up a PC Card for your computer Some PC Cards are ready to use as soon as you install them.
Enhancing Productivity Using SD® cards 141 Inserting an SD card Do not touch the SD® connector (metal area). You could expose the storage area to static electricity, which can destroy data. Do not remove an SD® card while data is being written or read. Even when the message “copying...” in the windows disappears, writing to the card might still be in progress and your data could be destroyed. Wait for the SD Media™ indicator light to go out.
Enhancing Productivity Using the i.LINK® port Using the i.LINK port ® The i.LINK® port on the rear of the computer provides an extremely fast data transfer rate (up to 400 mega bits per second [Mbps]). You can connect up to 63 external devices to the i.LINK® port. In addition to high speed, the i.LINK® port also supports isochronous data — the delivery of data at a guaranteed rate. This makes it ideal for devices that transfer high levels of data in real-time, such as video devices.
Enhancing Productivity Connecting your modem to a telephone line 143 Connecting to a phone line Before you can communicate using the modem, you need to connect it to a telephone line. Your computer’s built-in modem port provides an RJ-11 jack, allowing you to connect the modem to a standard voice-grade telephone line. 1 Plug one end of the telephone cable into the modem port on the back of the computer. Connecting the telephone cable to the modem port 2 Connect the other end to the RJ-11 wall jack.
Enhancing Productivity Connecting your modem to a telephone line Now you’re ready to send a fax or use the modem to connect to an online service or the Internet. For more information on using a modem, see “Setting up for communications” on page 123. 5.375 x 8.375 ver 2.
Chapter 6 Toshiba Utilities Your computer includes several utilities designed to help you to reconfigure your system to best meet your individual needs. Together, these allow you to determine certain system details, set additional options, or change default options.
Toshiba Utilities Fn-esse® Fn-esse ® Desktop shortcuts and Toshiba’s Fn-esse program provide quick ways to open programs, documents, and folders from within any Windows® program without using the Start menu. For more information on creating desktop shortcuts, refer to the operating system documentation that came with your computer. This section describes how to use the Fn-esse program to quickly access your programs and files.
Toshiba Utilities Fn-esse® 147 The keys are color-coded as follows: ❖ Available keys are dark gray with white letters. ❖ Assigned keys and keys associated with a popup list are shown on the Fn-esse keyboard in the selected color. ❖ Unavailable keys are light gray. There are two ways to assign a key to open a program or document: ❖ Using drag-and-drop ❖ Using the keyboard or pointing device The method most often used is drag-and-drop.
Toshiba Utilities Fn-esse® The program or document is now associated with the key you just selected. To open the program or document, press Fn plus the appropriate key from within any Windows program. Using the keyboard or pointing device to assign keys To assign a key to open a program or document, start Fn-esse and either: ❖ Using the keyboard, press and hold the Fn key, then press the desired assignment key.
Toshiba Utilities Fn-esse® 149 Making a popup assignment 1 Select Popup... to display the Application Explorer dialog box. 2 Select the desired folder. The left side of the Application Explorer window displays the folders in the Programs menu. The right side lists the programs and documents in the folder. These are the items that will appear in the popup list.
Toshiba Utilities TOSHIBA Console Changing or removing existing key assignments In the Fn-esse keyboard, click the key you wish to change with the secondary button. Fn-esse displays the Assignment Type dialog box. ❖ To change the key assignment, click Direct... or Popup... and continue as if you were creating a new assignment. ❖ To remove the key assignment, click Clear.
Toshiba Utilities TOSHIBA Console 151 The TOSHIBA Console offers three categories of features: ❖ Customizing Your Computer ❖ Network ❖ Security Customizing Your Computer The features available in this category are: ❖ Power Management ❖ Mouse ❖ Hotkey assignment (for detailed information, see “Fn-esse®” on page 146) ❖ Toshiba Hardware Settings ❖ Toshiba Button Control ❖ ConfigFree Network The features in this category are: ❖ IR Utility ❖ Connectivity Doctor Security The features avail
Toshiba Utilities TOSHIBA Console To access Power Management through the TOSHIBA Console, double-click the Power Management icon. The TOSHIBA Power Saver Properties window appears. Sample Toshiba Power Saver Properties window The Power Properties window shows the power profiles, which are optimized for several different working environments. You can either use one of the preset modes or create and use your own customized profile. The preset profiles cannot be deleted.
Toshiba Utilities TOSHIBA Console ❖ High Power ❖ Normal ❖ DVD Playback ❖ Presentation 153 Although you can change the properties for any of these profiles, this is not recommended. If you need a customized profile, create a new profile with the properties you require. The DVD Playback profile applies only when a DVD program is playing. Quickly creating a new power mode 1 Highlight one of the preset profiles. 2 Click Copy.
Toshiba Utilities TOSHIBA Console Hotkey utility The hotkey utility allows you to receive a confirmation message when you use the hotkey combination for Standby [Fn+F3] and Hibernation [Fn+F4]. To activate: 1 Click Start, All Programs, Toshiba, Utilities, then click the Hotkey utility. The Hotkey window appears. Sample Toshiba Hotkey utility window 2 Select the desired option. 3 Click OK.
Toshiba Utilities TOSHIBA Console 155 Sample TOSHIBA HWSetup window The tabs represent various dialog boxes.
Toshiba Utilities Enabling Hibernation Any options that you change will become default settings when you restart your system. Enabling Hibernation Your computer includes a Toshiba Power Saver utility that allows you to change many of your default power settings. You can enable hibernation through this utility. To power down the computer using the Hibernation option, click Start, select Turn off computer. When you hold down the Shift key, the Standby button changes to Hibernate.
Toshiba Utilities Setting user passwords ❖ 157 A supervisor password — Prohibits unauthorized users from accessing certain functions such as Toshiba Hardware Setup. This is useful if more than one person uses the computer. A single user password supports the instant and power-on password functions. When setting up the various passwords, keep the following in mind: ❖ The user password can be set up under the supervisor password.
2 Toshiba Utilities Setting user passwords Point to TOSHIBA Console, then click the resulting TOSHIBA Console selection. You may also press the TOSHIBA Console button to the left of the keyboard to open the TOSHIBA Console. The TOSHIBA Console window appears. 3 On the left side, select Security. 4 Select the User Password icon. 5 Click Set. 6 Type your password in the Input box. 7 Retype your password in the Input again box. 8 Click Set. 9 Click OK.
Toshiba Utilities Using a supervisor password 159 Using a supervisor password A supervisor password prevents other users from changing hardware configuration options. Setting a supervisor password To register a password for the power-on password functions: 1 Click Start, the click All Programs. 2 Point to TOSHIBA Console, then click the resulting TOSHIBA Console selection. You may also press the TOSHIBA Console button to the left of the keyboard to open the TOSHIBA Console.
Toshiba Utilities Using a supervisor password 6 Type your password in the Input box. 7 Retype your password in the Input again box. 8 Click Set. 9 Click OK. Deleting a supervisor password To cancel the power-on password function: 1 Click Start, the click All Programs. 2 Point to TOSHIBA Console, then click the resulting TOSHIBA Console selection. You may also press the TOSHIBA Console button to the left of the keyboard to open the TOSHIBA Console. The TOSHIBA Console window appears.
Chapter 7 If Something Goes Wrong Some problems you may encounter when using your notebook computer are relatively easy to identify and solve. Others may require help from your dealer or the manufacturer of a software program. This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter.
2 If Something Goes Wrong Problems that are easy to fix Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. 3 Select the program you want to close, then click End Task. Closing the failed program should allow you to continue working. If it does not, continue with step 3. 4 Close the remaining programs one by one by selecting the program name, then End Task. 5 Click Start, Turn off computer.
If Something Goes Wrong Problems when you turn on the computer 6 163 Save the file and refer to it when you contact the software manufacturer. Problems when you turn on the computer These problems may occur when you turn on the power. The computer will not start. Make sure you attached the AC adapter and power cable properly or installed a charged battery. Press and hold down the power button for a few seconds.
If Something Goes Wrong The Windows® operating system is not working The computer displays the WARNING RESUME FAILURE message. The computer was placed in Stand By mode and the battery has discharged. Data stored in the computer’s memory has been lost. To charge the battery, leave the computer plugged into a live wall outlet for several hours. For more information, see “Power and the batteries” on page 171. The computer displays the Non-System disk or disk error message.
If Something Goes Wrong The Windows® operating system is not working 165 Using Startup options to fix problems If the operating system fails to start properly, you may have to change your system’s configuration or verify the startup procedure to fix the problem. To do this, use the options in the Startup menu. This section describes each option and when to use the procedure. To open the Startup menu: 1 Restart your computer. 2 Press F8 when your computer starts.
If Something Goes Wrong The Windows® operating system is not working See your Windows® documentation for further explanation. TECHNICAL NOTE: If your computer is connected to a network, the Startup menu may display different versions of Safe mode. Internet problems My Internet connection is very slow. Many factors contribute to the speed with which you can surf the Internet. They include: modem speed, time of day (when everyone else is surfing, your access can be slow) and popularity of the site.
If Something Goes Wrong Resolving a hardware conflict 167 The Help and Support window appears. 2 Then do one or both of the following: ❖ In the search field, type in the topic of the problem with which you need help and follow the on-screen instructions. ❖ Click a problem you would like help with from the listings and follow the on-screen instructions. You can connect to Support Online by clicking Support from the menu.
If Something Goes Wrong Resolving a hardware conflict you add each device, test it to make sure it and all previously connected devices work. The device most recently connected to the system is the one most likely to be causing a hardware conflict. Resolving hardware conflicts on your own Computer components need resources to accomplish a task. A device, such as a disk drive or a modem, needs a channel to the computer’s Central Processing Unit (CPU).
If Something Goes Wrong Resolving a hardware conflict 169 ❖ Disable another system component and use its resources for the new device, see “Fixing a problem with Device Manager” on page 169. ❖ Reconfigure the device so that its requirements do not conflict. Refer to the device’s documentation for instructions about changing settings on the device. Fixing a problem with Device Manager Device Manager provides a way to check and change the configuration of a device.
If Something Goes Wrong Resolving a hardware conflict Checking device properties Device Manager provides a way to view the properties of a device. Properties include the name of the manufacturer, the type of device, the drivers installed, and the system resources assigned to the device. To check a device’s properties: 1 Open the Start menu, click Control Panel. 2 Click Performance and Maintenance, and then Administrative Tools. 3 Click the Computer Management icon.
If Something Goes Wrong Resolving a hardware conflict 171 Memory problems Incorrectly connected or faulty memory modules may cause errors that seem to be device-related. It is worthwhile checking for these first: 1 Click Start, then click Turn off computer. 2 Click Turn Off. The operating system shuts down and turns off the computer automatically. 3 Remove the memory module.
If Something Goes Wrong Resolving a hardware conflict The AC power light does not come on when you plug in the AC adapter and power cable. Make sure the AC adapter and power cable are firmly plugged into both the wall outlet and the computer. If the AC power light still does not come on, check that the wall outlet is working properly by plugging in a lamp or other appliance. The AC adapter and power cable work correctly, but the battery will not charge.
If Something Goes Wrong Resolving a hardware conflict 173 memory module, that takes its power from the battery? Is your software using the hard disk more? Is the display power set to turn off automatically? Was the battery fully charged to begin with? All these conditions affect how long the charge lasts. Keyboard problems If, when you type, strange things happen or nothing happens, the problem may be related to the keyboard itself. The keyboard produces unexpected characters.
If Something Goes Wrong Resolving a hardware conflict password, press the Enter key, type the password and press Enter. If no password is registered, press Enter. The screen reactivates and allows you to continue working. If you are using the built-in screen, make sure the display priority is not set for an external monitor. To do this, hold the Fn key and press F5 twice. A window with display choices pops up. Hold the Fn key and press F5 twice again to advance through the display options.
If Something Goes Wrong Resolving a hardware conflict 3 175 Change the Colors option and click OK. For more information, see Windows ® Help. A message tells you that there is a problem with your display settings and that the adapter type is incorrect or the current settings do not work with your hardware. Reduce the size of the color palette to one that is supported by the computer’s internal display. To change the display properties: 1 Point at the desktop and click with the secondary button.
If Something Goes Wrong Resolving a hardware conflict Sometimes a disk problem may cause one or more files to appear to have garbage in them. Typical disk problems are: You are having trouble accessing a disk, or one or more files appear to be missing. Make sure you are identifying the drive by its correct name (A: or C:).
If Something Goes Wrong Resolving a hardware conflict 177 Your data files are damaged or corrupted. Refer to your software documentation for file recovery procedures. Many software packages automatically create backup files. You may also be able to recover lost data using utility software, which is available from your dealer. Some programs run correctly but others do not. This is probably a configuration problem.
If Something Goes Wrong Resolving a hardware conflict DVD-ROM or multi-function drive problems You cannot access a disc in the drive. Make sure the drive tray has closed properly. Press gently until it clicks into place. Open the drive tray and remove the disc. Make sure the drive tray is clean. Any dirt or foreign object can interfere with the laser beam. Examine the disc to see whether it is dirty. If necessary, wipe it with a clean damp cloth dipped in water or a neutral cleaner.
If Something Goes Wrong Resolving a hardware conflict 179 If you are using external headphones or speakers, check that they are securely connected to your computer. The computer emits a loud, high-pitched noise. This is feedback between the microphone and the speakers. It occurs in any sound system when input from a microphone is fed to the speakers and the speaker volume is too loud. Adjust the volume control.
If Something Goes Wrong Resolving a hardware conflict Some card manufacturers use special software called enablers to support their cards. Enablers result in nonstandard configurations that can cause problems when installing the PC Card. If your system does not have built-in drivers for your PC Card and the card did not come with an operating system driver, it may not work under the operating system.
If Something Goes Wrong Resolving a hardware conflict 5 Double-click the PCMCIA adapter. 6 Double-click the appropriate PC Card. 181 The operating system displays your PC Card’s Properties dialog box, which contains information about your PC Card configuration and status. The computer stops working (hangs) when you insert a PC Card. The problem may be caused by an I/O (input/output) conflict between the PCMCIA socket and another device in the system.
If Something Goes Wrong Resolving a hardware conflict If the card is attached to an external device, check that the connection is secure. Refer to the card’s documentation, which should contain a troubleshooting section. Printer problems This section lists some of the most common printer problems: The printer will not print. Check that the printer is connected to a working power outlet, turned on and ready (online). Check that the printer has plenty of paper.
If Something Goes Wrong Develop good computing habits 183 will print. Contact the software manufacturer for more information. Modem problems This section lists common modem problems: The modem will not receive or transmit properly. Make sure the cable from the modem to the telephone line is firmly connected to the computer’s modem port and the telephone line jack. Check the port settings to make sure the hardware and software are referring to the same COM port.
If Something Goes Wrong Develop good computing habits On a regular basis, back up the information stored on your hard disk. Here are some ways you can do this: ❖ Copy files to diskette, following the steps in “Saving your work” on page 76. ❖ Connect a tape drive to the system and use specialized software to copy everything on the hard disk to a tape. Some people use a combination of these methods, backing up all files to tape weekly and copying critical files to diskette on a daily basis.
If Something Goes Wrong If you need further assistance 185 If you need further assistance If you have followed the recommendations in this chapter and are still having problems, you may need additional technical assistance. This section contains the steps to take to ask for help. Before you call Since some problems may be related to the operating system or the program you are using, it is important to investigate other sources of assistance first.
If Something Goes Wrong If you need further assistance Contacting Toshiba If you still need help and suspect that the problem is hardware-related, Toshiba offers a variety of resources to help you. To stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at pcsupport.toshiba.com. Toshiba voice contact Before calling Toshiba, make sure you have: ❖ Your computer’s serial number.
If Something Goes Wrong Other Toshiba Internet Web sites 187 Other Toshiba Internet Web sites toshiba.com Worldwide Toshiba corporate site computers.toshiba.com Marketing and product information in the USA www.toshiba.ca Canada www.toshiba-Europe.com Europe www.toshiba.co.jp/index.htm Japan http://servicio.toshiba.com Mexico and all of Latin America Toshiba’s worldwide offices Australia Toshiba (Australia) Pty.
If Something Goes Wrong Toshiba’s worldwide offices Germany Toshiba Europe GmbH Leibnizstraße 2 D-93055 Regensburg Germany Greece Ideal Electronics S.A. 109 Syngrou Avenue 176 71 Kalithea Athens Greece Hungary Technotrade Kft. Szerencs utca 202 1147 Budapest Hungary Ireland Toshiba Information Systems (U.K) Ltd. Toshiba Court Weybridge Business Park Addlestone Road Weybridge KT15 2UL United Kingdom Italy Progetto Elettronica 92 s.r.l.
If Something Goes Wrong Toshiba’s worldwide offices The Netherlands Toshiba Information Systems Benelux B.V. Rivium Boulevard 41 2909 LK, Capelle a/d IJssel The Netherlands Norway Scribona Norge A/S Toshiba PC Service Stalfjaera 20 P.O. Box 51 Kalbakken 0901 OSLO 9 Norway Papua New Guinea Fujitsu (PNG) Pty. Ltd. P.O. Box 4952 Boroko NCD, Papua New Guinea Poland TECHMEX S.A. ul. Partyzantów 71, 43-316 Bielsko-Biala 01-059 Warszawa Poland Portugal Quinta Grande Assisténcia Técnica Informática, Lda. Av.
If Something Goes Wrong Toshiba’s worldwide offices Switzerland Ozalid AG Herostrasse 7 8048 Zürich Switzerland United Kingdom Toshiba Information Systems (U.K) Ltd. Toshiba Court Weybridge Business Park Addlestone Road Weybridge KT15 2UL United Kingdom United States Toshiba America Information Systems, Inc. 9740 Irvine Boulevard Irvine, California 92618 United States The Rest of Europe Toshiba Europe (I.E.) GmbH Hammfelddamm 8 D-4-1460 Neuss Germany 5.375 x 8.375 ver 2.
Appendix A Hot Keys Hot keys are keys that, when pressed in combination with the Fn key, turn system functions on and off. Hot keys have a legend on or above the key indicating the option or feature the key controls. Volume Mute Fn + This hot key enables/disables volume mute on your computer. When volume mute is enabled, no sound will come from the speakers or headphones. 191 5.375 x 8.375 ver 2.
Hot Keys Instant password security Instant password security Fn + This hot key blanks the display. When the display re-appears, select your user name and enter the correct password if you have created one. Power usage profile Fn + This hot key displays the power usage pop-up window and cycles through the profiles. The power usage profiles are: Full Power, High Power, Normal, DVD Playback, Presentation, and Long Life.
Hot Keys Stand By mode 193 Stand By mode Fn + This hot key puts the computer into Stand By mode. A message box is displayed by default to confirm that the computer is going into Stand By mode. This message box can be set so it does not display. Sample Stand By confirmation box For more information about Stand By mode, please see “Using Standby” on page 96. 5.375 x 8.375 ver 2.
Hot Keys Hibernation mode Hibernation mode Fn + This hot key puts the computer into Hibernation mode. If Hibernation mode is enabled (the default) a message box is displayed by default to confirm the computer is going into Hibernation mode. The message box can be set so it does not display. Sample Hibernation confirmation box If Hibernation mode is disabled, this hot key will not respond. For more information on Hibernation mode, see “Enabling Hibernation” on page 156. 5.375 x 8.375 ver 2.
Hot Keys Display modes 195 Display modes Fn + This hot key cycles through the power-on display options.
Hot Keys Disabling or enabling the TouchPad Disabling or enabling the TouchPad Fn + This hot key enables/disables the TouchPad. To use the TouchPad, see “Disabling or enabling the TouchPad” on page 55. Sample disable and enable TouchPad windows Keyboard hot keys Fn + This hot key turns the cursor control overlay on and off. Fn + This hot key turns the numeric overlay on and off. Fn + This hot key turns the scroll lock feature on and off. 5.375 x 8.375 ver 2.
Appendix B Power Cable Connectors The computer features a universal power supply you can use worldwide. This appendix shows the shapes of the typical AC power cable connectors for various parts of the world. USA and Canada United Kingdom UL approved CSA approved BS approved Australia Europe AS approved VDA approved NEMKO approved 197 5.375 x 8.375 ver 2.
Appendix C Using ConfigFree™ with your Toshiba Computer ConfigFree™ is a set of utilities used for configuring networks that use both wired and wireless network devices. These utilities include the following: ❖ Connectivity Doctor — The Connectivity Doctor utility is used to help fix networking problems with your notebook computer. For more information, see “Connectivity Doctor” on page 201.
Using ConfigFree™ with your Toshiba Computer Getting Started ❖ 199 Quick Connect — The Quick Connect utility is used to configure a wireless LAN connection (ad hoc connection) between a personal computer and a Toshiba Wireless Projector. The Toshiba Wireless Projector utility must be installed in order to enable Quick Connect. For more information, see “Quick Connect” on page 205 Getting Started This section contains information about the ConfigFree main screen, and how to start and configure ConfigFree.
Using ConfigFree™ with your Toshiba Computer Getting Started ❖ Create LOG — Creates and displays a log file containing diagnostic information about devices connected to the network. ❖ About — Displays version information about ConfigFree. ❖ Help — Displays the online help file. Starting ConfigFree To start ConfigFree, do any of the following: ❖ (Microsoft® Windows® XP users) Click the Start button, and then point to All Programs.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities ❖ 201 Right-click the ConfigFree icon on the taskbar, and then click Options. For more information on configuring ConfigFree, see the online help. ConfigFree Utilities Connectivity Doctor The Connectivity Doctor displays the connection configuration and the status of all wired and wireless LAN devices that are connected to the network.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities The Connectivity Doctor The Connectivity Doctor screen automatically refreshes. However, you can also use the Refresh button to refresh the screen. Device Settings The Device Settings screen displays a list of all wired, wireless, and infrared (for systems with infrared) devices that are connected to the network. Detailed information about each device, such as the driver version number and the status, are also displayed. 5.375 x 8.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 203 Viewing the device settings ❖ Network Connections — Displays the Network Connection window, which contains detailed information about the network connection. ❖ Enable/Disable — You can easily enable or disable any of the listed devices simply by selecting the desired device, and then clicking the Enable/Disable button. Each time a device is enabled or disabled, the status of the device will change.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Profile Settings The Profile Settings utility displays a list of all the registered profiles in ConfigFree. You can also add, modify, and delete profiles; switch the profile being used; and view specific details about each profile. Viewing registered profiles ❖ Details — The Details button displays the ConfigFree Details screen.
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities 205 Add, Modify, and Delete a Profile ❖ To add a new profile to ConfigFree, click the Add button in the Profile Settings screen. To overwrite an existing profile, select the profile to be overwritten, and then click Add. ❖ To modify an existing profile, select the profile you want to modify, and then click Modify. ❖ To delete an existing profile, select the profile to be deleted, and then click Delete.
Using ConfigFree™ with your Toshiba Computer Using Auto Switch If the wireless mode for the wireless setting is set for 5GHz (802.11a), Quick Connect will change this mode to 2.4GHz (802.11b), and then connect to the projector. The wireless LAN configuration will return to the default settings under the following conditions: ❖ If the Toshiba Wireless Projector utility is closed.
Using ConfigFree™ with your Toshiba Computer Using Auto Switch ❖ 207 From the Profile Settings screen, you can click the Auto Switch button. Auto Switch (Cable Disconnect) If a wired network cable is disconnected from the network, the Auto Switch (Cable Disconnect) option will automatically switch to another network device.
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms These acronyms may appear in this user’s guide. AC alternating current BIOS basic input/output system bps bits per second CD compact disc CD-ROM compact disc read-only memory CD-RW compact disc rewrite memory CMOS complementary metal-oxide semiconductor COM1 communications port 1 (serial port) COM2 communications port 2 (serial port) CPU central processing unit 208 5.375 x 8.
Glossary DC direct current DMA direct memory access DIMM dual inline memory module DOS disk operating system DPI dots per inch DSTN dual supertwist nematic DVD digital versatile (or video) disc 209 DVD-ROM digital versatile (or video) disc read-only memory ECP enhanced capabilities port EPROM erasable programmable read-only memory FAT file allocation table FCC Federal Communications Commission FIR fast infrared GB gigabyte HDD hard disk drive HTML Hypertext Markup Language IE
Glossary PCMCIA Personal Computer Memory Card International Association RAM random access memory RFI radio frequency interference ROM read-only memory RTC real-time clock SCSI small computer system interface DDRAM double data random access memory SRAM static random access memory SVGA super video graphics adapter TFT thin film transistor USB universal serial bus URL uniform resource locator WAN wide area network www World Wide Web Terms These terms may appear in this user’s
Glossary 211 alternating current (AC) — The type of power usually supplied to residential and commercial wall outlets. AC reverses its direction at regular intervals. Compare direct current (DC). application — A computer program that you use to perform tasks of a specific type. Applications include word processors, spreadsheets, and database management systems. See also program. B backup — A copy of a file, usually on a removable disk, kept in case the original file is lost or damaged.
Glossary bus — An electrical circuit that connects the central processing unit (CPU) with other parts of the computer, such as the video adapter, disk drives, and ports. It is the pathway through which data flows from one device to another. See also bus speed, frontside bus. bus speed — The speed at which the central processing unit (CPU) communicates with the other parts of the computer. byte — A sequence of eight bits. A byte is the smallest addressable unit of data.
Glossary 213 compatibility — The extent to which computers, programs, or devices can work together harmoniously, using the same commands, formats, or language as another. configuration — (1) The collection of components that make up a single computer system. (2) How parts of the system are set up (that is, configured). controller — A device that controls the transfer of data from a computer to a peripheral device and vice versa.
Glossary disable — To turn a computer option off. See also enable. disc — A round, flat piece of metal, designed to be read from and written to by optical (laser) technology, and used in the production of optical discs, such as CDs and DVDs. Compare disk. disk — A round, flat piece of material that can be magnetically influenced to hold information in digital form, and used in the production of magnetic disks, such as diskettes and hard disks. Compare disc. See also diskette, hard disk.
Glossary 215 DVD — An individual digital versatile (or video) disc. See also DVDROM. DVD-ROM (digital versatile [or video] disc read-only memory) — A very high-capacity storage medium that uses laser optics for reading data. Each DVD-ROM can hold as much data as several CD-ROMs. Compare CD-ROM. E emulation — A technique in which a device or program imitates another device or program. enable — To turn on a computer option. See also disable. executable file — A computer program that is ready to run.
Glossary format — (verb) To prepare a blank disk for use with the computer’s operating system. Formatting creates a structure on the disk so the operating system can write information to the disk or read information from it. frontside bus — The primary pathway (bus) between the CPU and the computer’s main memory. Also called “system bus.” See also bus. function keys — The keys labeled F1 through F12, typically located on the keyboard.
Glossary 217 hot swapping — The ability to add or remove devices from a computer while the computer is running and have the operating system automatically recognize the change. I icon — A small image displayed on the screen that represents a function, file, or program. interlaced — A method of refreshing a computer screen, in which only every other line of pixels is refreshed. Interlaced monitors take two passes to create a complete screen image. Compare non-interlaced. internal device — See device.
Glossary local area network — See LAN. logical drive — A section of a disk that is recognized by the operating system as a separate disk drive. A system’s logical drives may differ from its physical drives. For example, a single hard disk drive may be partitioned into two or more logical drives. M megabyte (MB) — A unit of data equal to 1,048,576 bytes (1024 x 1024 bytes). See also bytes.
Glossary 219 non-interlaced — A method of refreshing a computer screen, in which each pixel of every line is refreshed as the electron beam scans across and down the screen. Compare interlaced. non-system disk — A disk for storing programs and data that cannot be used to start the computer. Compare system disk. O online — Available through the computer.
Glossary pointing device — Any device, such as the AccuPoint or a mouse, that enables you to move the cursor on the screen. port — A socket on the computer where you plug in a cable for connection to a network or a peripheral device. processor — See central processing unit (CPU). program — A set of instructions that can be executed by a computer. The general classes of programs (also called software) are operating system, application, and utility. See also operating system, application, utility.
Glossary 221 ROM (read-only memory) — Non-volatile memory that can be read but not written to. By non-volatile, we mean that information in ROM remains whether or not the computer is receiving power. This type of memory is used to store your computer’s BIOS, which is essential instructions the computer reads when you start it up. See also BIOS, memory. Compare RAM. S select — To highlight or otherwise specify text, data, or graphics with the intent to perform some operation on it.
U Glossary universal serial bus (USB) — A serial bus that supports a data transfer rate of up to 12 Mbps (12 million bits per second). USB can connect up to 127 peripheral devices through a single all-purpose USB port. USB allows hot swapping of peripherals. See also bus, hot swapping, serial. upload — To send a file to another computer through a modem or network. See also download. USB — See universal serial bus (USB).
Index Numerics AC adapter 43 AC power cable connectors 197 accessories carrying cases 89 memory 46 Add Printer Wizard 115 adding memory 46 adjusting recording quality 134 Alt keys 70 arm/wrist strain 40 assign keys Fn-esse 148 audio .
Index playing an audio 130 playing using Auto-Run 132 Ctrl keys 70 CDs D problem solving 178 channels DMA 168 IRQ 168 character keys 69 charging the battery 46 checking device properties 170 click 54 communications network connection 125 setting up 91 system resources 168 compact disc positioning 83 compact discs handling 84 inserting 82 problem solving 178 removing 84 computer customizing 151 non-system disk or disk error message 164 not accessing disk drives 163 precautions 41 setting up 47 turn
Index disposing of used batteries 109 DMA (Direct Memory Access) 168 double-click 54 DVD-ROM drive problems 178 troubleshooting 170 DVD-ROM or multi-function drive can’t access disc 178 opening 83 DVD-ROM/multi-function drive drive tray will not open 178 problems 178 troubleshooting 170 E ergonomics 40 error messages device driver conflict 167 general hardware problem 167 non-system disk or disk error 164, 177 problem with display settings/ current settings not working with hardware 175 program has perfor
Index keyboard overlays 196 power usage mode 192 Stand By mode 193 volume mute 191 hot key power usage mode 111 hot key utility 153, 154 hot keys 191 hot swapping PC Cards 86 I icon 120 definition 35 desktop 120 hint 35 internet explorer 121 moving to desktop 120 recycle bin 120 safety 34 technical note 35 Industry Canada requirement 4 installation memory module 47 installing memory modules 46 mouse 63 instant passwords, using 157 Internal/External mode 175 Internet bookmarked site not found 166 slow
Index problem solving 171 removing expansion slot cover 48 memory module inserting 49 installation 47 removing 51 microphone 133 external, connecting 66 Microsoft Support Online Web site 167 modem connecting to a telephone line 142 determining COM port 123 problem solving 183 resetting port to default settings 123 upgrading 123 modules Wi-Fi Mini PC 118 monitor 58 connecting 59, 61 external connecting 113 not working 174 mouse installing 63 serial 63 using 113 N network 151 accessing 125 Dial-Up Networkin
Index turning on 52 universal power supply 197 power button 52 Power Management 151 power mode creating new 153 customizing 153 power source 43 power usage mode hot key 111 power usage mode hot key 192 power usage modes 110 powering down using Standby 96 precautions 41, 45 other computer use 41 primary button 54 printer choosing a driver 115 connecting a parallel 114 local, connecting 63 problem solving 182 set up 115 using 113 printing a file 78 problem solving AC power 172 accessing disk drives 163
Index 177 screen does not look right/flickers 174 system resources 168 trouble prevention 183 URL address not found 166 using Startup options 165 warning resume failure 164 Windows won’t start 163 Windows XP not working 164 program, starting 73 programs not running correctly 177 projector 58 connecting 61 protection of stored data 2 R real-time clock (RTC) battery 100 recording .
Index T taskbar 121 telephone line connecting to modem 142 television 58 adjusting display 62 connecting 59 Toshiba Internet Web sites 187 Toshiba Accessories information 35 Toshiba Console 150 Toshiba Hardware Setup 154 Toshiba online resources 98 Toshiba utilities 145 trademarks 23 transferring files 122 transferring information between computers 122 turning off the computer 57 turning on the computer 46 turning on the power 52 U Universal Resource Locator (URL) 122 USB mouse connecting 113 user pa
