User Guide

3.13 NDP Test 3 Tests and Diagnostics
3.13 NDP Test
To execute the NDP test, select 10-NDP TEST from the DIAGNOSTICS TEST MENU,
press Enter and follow the directions on the screen. The NDP test contains one subtest.
Subtest 01 NDP
This test checks the following functions of NDP. This test can be executed
when NDP is installed. NDP is installed when the bit 1 of configuration byte
is “1”.
 Control word
 Status word
 Bus
 Addition
 Multiplication
Portege M200 Maintenance Manual (960-457) 3-31