User Guide

3.24 Floppy Disk Drive Utilities 3 Tests and Diagnostics

3. COPY program

(a) When FORMAT program is loaded, the following message is displayed:

FLOPPY DISK FORMAT & COPY : V6.00

Type select (0:2DD,3:2HD) ?

(b) Selecting a media/drive type number will display a message below:

Insert source disk into drive A:

Press any key when ready.

any key. The following message appears and copying of the disk starts.

[ FDD TYPE ] : TRACK = XXX

[ FDD TYPE ] : HEAD = X

[ FDD TYPE ] : SECTOR = XX

Copy start

[[ track,head = XXX X ]]

(d) Remove the source disk from the FDD, insert a formatted work disk and press

any key. The following message will appear and start copying to the target

disk.

Insert target disk into drive A:

Press any key when ready.

[[ track,head = XXX X ]]

(e) When the amount of data is too large to be copied in one operation, the

message from step (b) is displayed again. After the floppy disk has been

copied, the following message will appear:

Copy complete

Another copy (1:Yes/2:No) ?

(f) To copy another disk, type 1 and the message from step (a) is displayed again.

Entering 2 returns the test program to the DIAGNOSTIC MENU.

Portege M200 Maintenance Manual (960-457) 3-61