User Guide

2.15 Wireless LAN Troubleshooting 2 Troubleshooting
Procedure 4 Replacement Check
Check if the wireless LAN board and the system board are connected properly. If they are
properly connected but there is stall an error, any of these components may be damaged.
Disassemble the computer following the steps described in Chapter 4 and replace the board
with a new one.
Check 1 The wireless LAN board may be defective or damaged. Disassemble the computer
following the steps described in Chapter 4 and replace the board with a new one. If
there is still an error go to Check 2.
Check 2 The system board may be defective or damaged. Disassemble the computer
following the steps described in Chapter 4 and replace the board with a new one.
Portege M200 Maintenance Manual (960-457) 2-53