Laptop User Manual

Getting Started

Using external display devices

TouchPad setting options vary by computer model. The TouchPad

settings are accessible through the Mouse Properties option of the

Windows Control Panel. For more information, please visit

www.support.toshiba.com, and enter the phrase “Mouse pointer

jumps around as you type” into the Search field.

Disabling or enabling the TouchPad™

The TouchPad™ is enabled by default. To enable/disable the

TouchPad, do one of the following:

❖ Press the TouchPad ON/OFF ( ) button.

(Available on certain models.)

Press

Fn + F9. For more information, see “Disabling or enabling the

TouchPad™” on page 202.

Alternately, you can disable only the tapping feature. If you disable

tapping only, you can still use the TouchPad’s control buttons and

move the pointer by sliding your finger on the TouchPad. To disable

tapping only, use the Mouse Properties option in the Windows

Control Panel.

Using external display devices

Your computer comes with a built-in display, but you can also

connect the following types of external display devices to the video

ports described below:

❖ An HDMI™-compatible television or external display device

via the HDMI™ Out port*

Locate the HDMI™ Out port on the Quick Start Card that

shipped with your computer.

❖ An external monitor or projector via the RGB (monitor) port

(Sample Illustration) Video ports on the side of the computer

NOTE

HDMI™ Out port*

*Available on certain models

RGB (Monitor) port