Benutzerhandbuch C50-B/C50T-B/C50D-B
Inhaltsverzeichnis Kapitel 1 TOSHIBA-Informationen zu Recht, Zulassung und Sicherheit Copyright, Haftungsausschluss und Marken ..................................... 1-1 Zulassungsbestimmungen ................................................................... 1-2 Videostandardhinweis .......................................................................... 1-9 ENERGY STAR® Programm ............................................................... 1-10 Entsorgung des Computers und der Akkus .................
Externer Monitor .................................................................................. 4-24 Sicherheitsschloss .............................................................................. 4-28 Optionales TOSHIBA-Zubehör ........................................................... 4-29 Soundsystem und Videomodus ......................................................... 4-29 Kapitel 5 Utilitys und erweiterte Verwendung Utilitys und Anwendungen ...................................................
Kapitel 1 TOSHIBA-Informationen zu Recht, Zulassung und Sicherheit In diesem Kapitel werden rechtliche sowie zulassungs- und sicherheitsrelevante Hinweise, die für TOSHIBA-Computer gelten, aufgeführt. Copyright, Haftungsausschluss und Marken Copyright © 2015 TOSHIBA Corporation. Alle Rechte vorbehalten. Jede Wiedergabe oder Verwertung außerhalb der durch das Copyright erlaubten Grenzen ist ohne vorherige schriftliche Genehmigung seitens TOSHIBA unzulässig.
Marken Intel, Intel SpeedStep, Intel Core und Centrino sind Marken oder eingetragene Marken der Intel Corporation. AMD, das AMD Arrow-Logo, PowerPlay, Vari-Bright und Kombinationen davon sind Marken von Advanced Micro Devices, Inc. Windows, Microsoft und das Windows-Logo sind eingetragene Marken der Microsoft Corporation. Die Bluetooth®-Marke und -Logos sind eingetragene Marken im Besitz von Bluetooth SIG, Inc.
Schließen Sie das Gerät und den Empfänger an unterschiedliche Stromkreise an. Wenden Sie sich an den Händler oder an einen erfahrenen Rundfunk-/Fernsehtechniker. An dieses Gerät dürfen nur Peripheriegeräte angeschlossen werden, die den FCC-Bestimmungen der Klasse B entsprechen. Beim Betrieb mit nicht konformen oder nicht von TOSHIBA empfohlenen Peripheriegeräten kommt es wahrscheinlich zu Störungen des Rundfunk- und Fernsehempfangs.
Erklärung zur EU-Konformität Dieses Produkt trägt das CE-Kennzeichen in Übereinstimmung mit den entsprechenden europäischen Richtlinien. Verantwortlich für die CE-Kennzeichnung ist die TOSHIBA EUROPE GMBH, Hammfelddamm 8, 41460 Neuss, Deutschland. Den vollständigen und offiziellen Text der EU-Konformitätserklärung finden Sie auf der TOSHIBA-Website http://epps.toshiba-teg.com im Internet.
Für alle eventuellen Folgen, die aufgrund der Verwendung dieses Produkts in nicht geeigneten Arbeitsumgebungen entstehen könnten, ist TOSHIBA nicht verantwortlich.
Die folgenden Informationen gelten nur für die Mitgliedstaaten der EU: Entsorgung von Produkten Das Symbol mit der durchgestrichenen Mülltonne weist darauf hin, dass Produkte getrennt vom Hausmüll gesammelt und entsorgt werden müssen. Eingebaute Batterien und Akkus können zusammen mit dem Produkt entsorgt werden. Sie werden in den Recyclingzentralen entnommen und gesondert entsorgt. Der schwarze Balken zeigt an, dass das Produkt nach dem 13. August 2005 auf den Markt gebracht wurde.
Entsorgung von Batterien und/oder Akkus Das Symbol mit der durchgestrichenen Mülltonne weist darauf hin, dass Batterien und/oder Akkus getrennt vom Hausmüll gesammelt und entsorgt werden müssen. Wenn die Batterie oder der Akku mehr als die in der europäischen Batterie-Richtlinie spezifizierten Wert für Blei (Pb), Quecksilber (Hg) und/oder Kadmium (Cd) enthält, werden die chemischen Symbole für Blei (Pb), Quecksilber (Hg) und/oder Kadmium unter dem Symbol mit der durchgestrichenen Mülltonne angezeigt.
Die folgenden Informationen gelten nur für die Türkei: Entsorgung von Produkten: Das Symbol mit der durchgestrichenen Mülltonne weist darauf hin, dass dieses Produkt getrennt vom Hausmüll gesammelt und entsorgt werden muss. Am Ende seiner Lebensdauer sollte das Produkt zum Schutz der Umwelt und der Gesundheit beim nächsten Recyclingcenter oder Wertstoffhof abgegeben werden.
Diese Symbole sind bei Ihrem Modell möglicherweise nicht vorhanden; dies richtet sich nach dem Land/Gebiet, in dem Sie das Gerät gekauft haben. Videostandardhinweis DIESES PRODUKT WIRD FÜR PERSÖNLICHEN, NICHTKOMMERZIELLEN GEBRAUCH UNTER DER AVC-, VC1- UND MPEG-4PATENTPORTFOLIOLIZENZ AN ENDKONSUMENTEN LIZENZIERT. HIERDURCH IST ES DIESEN MÖGLICH (I) VIDEOS UNTER EINHALTUNG DER OBEN GENANNTEN STANDARDS („VIDEO“) ZU CODIEREN BZW.
ENERGY STAR® Programm Ihr Computermodell erfüllt möglicherweise die ENERGY STAR®-Bestimmungen. Falls dies auf Ihr Modell zutrifft, ist es mit dem Energy Star-Logo gekennzeichnet, und es gelten die folgenden Informationen. TOSHIBA ist Partner im ENERGY STAR Program und hat diesen Computer so entwickelt, dass die ENERGY STARRichtlinien für die Energieeffizienz eingehalten werden.
Sicherheitshinweise für optische Laufwerke Beachten Sie bitte unbedingt die Hinweise am Ende dieses Abschnitts. Das Laufwerkmodell enthält ein Lasersystem. Lesen Sie dieses Handbuch sorgfältig durch und bewahren Sie es zum Nachschlagen für später auf. Wenden Sie sich an ein autorisiertes Service-Center, wenn Wartungsmaßnahmen erforderlich werden.
Vorsichtsmaßnahmen VORSICHT: Dieses Gerät arbeitet mit einem Lasersystem und ist als „PRODUKT DER LASERSCHUTZKLASSE 1“ eingestuft. Lesen Sie dieses Handbuch sorgfältig durch und bewahren Sie es zum Nachschlagen für später auf. Wenden Sie sich an das nächste autorisierte Service-Center, wenn Probleme mit diesem Modell auftreten. Öffnen Sie das Gehäuse nicht, um zu vermeiden, dass Sie dem Laserstrahl direkt ausgesetzt werden.
Eine Überhitzung von Computer oder Netzadapter könnte zu einem Systemausfall, zu Schäden an Computer oder Netzadapter oder zu einem Brand führen, was schwere Verletzungen zur Folge haben kann. Computerfreundliche Umgebung einrichten Stellen Sie den Computer auf einer ebenen Oberfläche ab, die ausreichend Platz für den Computer sowie das gesamte erforderliche Zubehör (z. B. Drucker) bietet. Lassen Sie genügend Platz um den Computer und die Peripheriegeräte herum, damit die Lüftung gewährleistet ist.
Auch das Gehäuse des Netzadapters wird bei längerer Verwendung warm. Dieser Zustand weist nicht auf eine Fehlfunktion hin. Ziehen Sie den Netzadapter ab und lassen Sie ihn abkühlen, bevor Sie ihn transportieren. Legen Sie den Netzadapter nicht auf hitzeempfindlichem Material ab, da dieses sonst beschädigt werden könnte. Schäden durch Druck- oder Stoßeinwirkung Setzen Sie den Computer keinem starken Druck aus und lassen Sie keine Gegenstände auf ihn fallen.
Fahren Sie den Computer herunter, trennen Sie den Netzadapter vom Computer und lassen Sie diesen abkühlen, bevor Sie ihn transportieren. Bei Nichtbefolgung dieser Anweisung kann es zu leichteren Verbrennungen kommen. Setzen Sie den Computer keinen schnellen Temperaturänderungen aus (zum Beispiel, wenn Sie den Computer aus einer kalten Umgebung in ein geheiztes Zimmer bringen). Schalten Sie das Gerät nicht ein, solange es Kondensation gibt. Setzen Sie den Computer keinen Stößen aus.
führen kann, die möglicherweise kleinere Verletzungen zur Folge haben können. Bitte lesen. Ein Hinweis ist eine Anmerkung oder ein Ratschlag, der Ihnen bei der optimalen Nutzung Ihrer Geräte hilft.
Kapitel 2 Erste Schritte In diesem Kapitel finden Sie eine Teileprüfliste sowie grundlegende Informationen, um mit der Verwendung des Computers zu beginnen. Wenn Sie ein Betriebssystem verwenden, das nicht von TOSHIBA vorinstalliert wurde, funktionieren einige der in diesem Handbuch beschriebenen Merkmale möglicherweise nicht korrekt. Teileprüfliste Packen Sie den Computer vorsichtig aus. Heben Sie den Karton und das Verpackungsmaterial für den späteren Gebrauch auf.
Rechtsklick Klicken Sie einmal mit der rechten Touchpad-Steuerungstaste. Klicken Sie einmal mit der rechten Maustaste. Berühren und halten Sie den Touchscreen (nur bei Modellen mit Touchscreen). Doppelklicken Tippen Sie zweimal auf das Touchpad oder klicken Sie zweimal mit der linken Touchpad-Klicktaste. Klicken Sie zweimal mit der linken Maustaste. Tippen Sie zweimal auf den Touchscreen (nur bei Modellen mit Touchscreen).
Formatieren Sie Speichermedien nie, ohne zuvor den Inhalt zu überprüfen - beim Formatieren werden alle gespeicherten Daten gelöscht. Es ist empfehlenswert, den Inhalt des eingebauten Festplattenlaufwerks oder anderer wichtiger Speichergeräte regelmäßig auf externen Medien zu sichern. Die allgemein verwendeten Speichermedien sind nicht dauerhaft stabil; unter bestimmten Umständen können Daten verloren gehen.
Das mitgelieferte Netzkabel entspricht den Sicherheitsvorschriften und Bestimmungen in der Vertriebsregion, in der der Computer gekauft wurde, und sollte nicht außerhalb dieser Region verwendet werden. Für die Verwendung in anderen Ländern/Gebieten erwerben Sie Netzkabel, die den jeweiligen Sicherheitsvorschriften und Bestimmungen entsprechen. Verwenden Sie keinen 3-zu-2-Kontaktadapter.
2. Stecken Sie den Gleichstromausgangsstecker des Netzadapters in den 19-V-Gleichstromeingang (DC IN) des Computers. Abbildung 2-3 Gleichstromausgangsstecker an den Computer anschließen 1 2 1 2 1. 19-V-Gleichstromeingang (DC IN) 2. Gleichstromausgangsstecker Darstellung kann je nach Modell abweichen. 3. Schließen Sie das Netzkabel an eine Steckdose an. Die Anzeige DC IN/Akku leuchtet.
Abbildung 2-4 Bildschirm öffnen 1 1. Bildschirm Darstellung kann je nach Modell abweichen. Gehen Sie beim Öffnen und Schließen des Bildschirms mit Vorsicht vor. Öffnen Sie ihn nicht ruckartig und lassen Sie ihn nicht heftig zufallen, um Schäden am Computer zu vermeiden. Achten Sie darauf, beim Schließen des Bildschirms nicht mit dem Finger zwischen LCD und Akku zu geraten; Sie könnten sich verletzen.
Halten Sie den Computer mit einer Hand an der Handballenauflage fest, wenn Sie den Bildschirm mit der anderen Hand auf- oder zuklappen. Öffnen und schließen Sie den Bildschirm langsam und üben Sie dabei keine zu große Kraft aus. Einschalten In diesem Abschnitt wird das Einschalten des Geräts beschrieben. Die Anzeige Power zeigt den Status an. Weitere Informationen finden Sie unter Beschreibung der Stromversorgungsbedingungen.
Lesen Sie die Lizenzbedingungen und die Lizenzvereinbarung sorgfältig durch, wenn sie angezeigt werden. Kennenlernen von Windows Ausführliche Informationen zu den Neuerungen in Windows und zur Verwendung finden Sie unter Erste Schritte im Startmenü. Startmenü Das Startmenü ist der Ausgangspunkt für alles, was Sie im WindowsBetriebssystem tun können. Es bietet eine einfache Möglichkeit, auf Apps, Programme, Websites und andere wichtige Informationen zuzugreifen.
Suchen Mit der Funktion Suchen auf der Windows-Taskleiste können Sie Apps, Dateien, Einstellungen und mehr auf dem Computer suchen. Wenn eine Internetverbindung aktiv ist, werden auch die besten Suchergebnisse aus dem Internet angezeigt. Je nach Land/Region ist möglicherweise eine persönliche Assistentin namens Cortana verfügbar. Sie können sich in ganz normaler Sprache mit Cortana unterhalten und Fragen stellen. Cortana antwortet mit Informationen aus dem Internet auf Ihre Fragen.
für ein Benutzerkonto festgelegt haben, können Sie im WindowsAnmeldebildschirm eine Option auswählen, indem Sie auf „Anmeldeoptionen“ klicken. Kennwortauthentifizierung ist die voreingestellte Anmeldeoption. Tabletmodus Der Tabletmodus ermöglicht eine berührungsoptimierte Arbeitsumgebung ohne Tastatur und Maus. Nach dem Wechsel in den Tabletmodus werden das Startmenü und Apps im Vollbildmodus ausgeführt, damit Sie mehr Platz für die Bedienung haben.
Neustarten des Computers Unter bestimmten Bedingungen müssen Sie den Computer zurücksetzen. Beispielsweise, wenn: Sie bestimmte Einstellungen geändert haben. Für den Neustart des Computers gibt es verschiedene Möglichkeiten: Klicken Sie auf Start -> Ein/Aus und wählen Sie Neu starten. Drücken Sie gleichzeitig Strg, Alt und Entf (einmal), um ein Menü anzuzeigen, und wählen Sie dann Neu starten, indem Sie auf das Ein/Aus-Symbol ( ) unten rechts klicken.
Um den Computer aus dem Energiesparmodus zu reaktivieren, halten Sie die Ein/Aus-Taste oder eine beliebige Taste auf der Tastatur für einen kurzen Moment lang gedrückt. Beachten Sie, dass die Tasten der Tastatur nur dann zu diesem Zweck verwendet werden können, wenn die Reaktivierung durch die Tastatur in TOSHIBA System Settings aktiviert wurde.
Einschränkungen des Energiesparmodus Der Energiesparmodus funktioniert unter den folgenden Bedingungen nicht: Der Computer wurde sofort nach dem Herunterfahren wieder eingeschaltet. Speicherschaltkreise sind statischer Elektrizität ausgesetzt. Ruhezustand Wenn Sie den Computer in den Ruhezustand schalten, wird der Inhalt des Arbeitsspeichers auf der Festplatte gespeichert, sodass beim nächsten Einschalten des Geräts der zuletzt verwendete Zustand wiederhergestellt wird.
1. Klicken Sie auf Systemsteuerung -> System und Sicherheit -> Energieoptionen in der Gruppe Windows-System in Alle Apps. 2. Klicken Sie auf die Option Auswählen, was beim Drücken des Netzschalters geschehen soll oder Auswählen, was beim Zuklappen des Computers geschehen soll. 3. Klicken Sie auf Einige Einstellungen sind momentan nicht verfügbar. 4. Markieren Sie das Kontrollkästchen Ruhezustand in den Einstellungen für das Herunterfahren. 5. Klicken Sie auf Änderungen speichern.
Wiederherstellen der vorinstallierten Software von selbst erstellten Wiederherstellungsmedien Wiederherstellen der vorinstallierten Software vom RecoveryFestplattenlaufwerk Wenn Sie TOSHIBA Maintenance Utility zum Löschen der Festplatte verwenden, werden alle Daten einschließlich des Betriebssystems und der Wiederherstellungspartition gelöscht. In diesem Fall können Sie keine Wiederherstellungsmedien erstellen oder die vorinstallierte Software von der Wiederherstellungspartition wiederherstellen.
Ein Wiederherstellungs-Image der Software auf dem Computer wird auf dem Festplattenlaufwerk gespeichert und kann mit den folgenden Schritten entweder auf Disc oder USB-Flash-Speicher kopiert werden: 1. Wählen Sie eine leere Disc oder einen USB-Flash-Speicher. Sie können in der Anwendung auf einer Vielzahl von Medien wählen, auf die das Wiederherstellungs-Image kopiert werden kann, darunter Discs und USB-Flash-Speicher.
Achten Sie die darauf, die Standardstartmodusoption im TOSHIBA Setup Utility zu verwenden, bevor Sie die Wiederherstellung ausführen. 1. 2. 3. Öffnen Sie das TOSHIBA Setup Utility. Weitere Informationen dazu finden Sie im Abschnitt TOSHIBA Setup Utility. Wählen Sie im TOSHIBA Setup Utility-Bildschirm Advanced -> System Configuration -> Boot Mode. Hinweis: Sie können die folgenden Abschnitte überspringen, wenn Ihr System nicht über die Option „Boot Mode“ verfügt.
Wiederherstellen der vorinstallierten Software vom Recovery-Festplattenlaufwerk Ein Teil des Festplattenspeichers ist als verborgene Wiederherstellungspartition konfiguriert. In dieser Partition sind Dateien gespeichert, mit denen sich die vorinstallierte Software bei Problemen reparieren lässt.
Kapitel 3 Hardware-Überblick In diesem Kapitel werden die einzelnen Bestandteile des Computers vorgestellt. Machen Sie sich mit jeder Komponente vertraut, bevor Sie den Computer in Betrieb nehmen. Rechtlicher Hinweis (nicht zutreffende Symbole) Weitere Informationen zu nicht zutreffenden Symbolen finden Sie im Abschnitt Rechtliche Hinweise. Gehen Sie vorsichtig mit dem Computer um, um Kratzer oder andere Beschädigungen der Oberfläche zu vermeiden.
Anzeige „DC IN/Akku“ Die Anzeige DC IN/Akku informiert Sie über den Zustand des Gleichstromeingangs und den Akkuladezustand. Weiß bedeutet, dass der Akku voll aufgeladen ist und der Computer über den Netzadapter mit Strom versorgt wird. Weitere Informationen zu dieser Funktion finden Sie unter Beschreibung der Stromversorgungsbedingungen. Anzeige „Drahtlose Kommunikation“ Die Anzeige Drahtlose Kommunikation leuchtet gelb, wenn die Bluetooth- oder Wireless LANFunktionen aktiviert sind.
LAN-Buchse Über diese Buchse können Sie den Computer an ein LAN anschließen. Unterstützt werden Ethernet-LANs mit 10 Megabit/Sekunde (10BASE-T) oder Fast Ethernet-LANs mit 100 Megabit/Sekunde (100BASE-TX). Einige Modelle sind mit Gigabit Ethernet-LAN-Funktion ausgestattet (1000 Mbit/s, 1000BASE-T). Nähere Informationen finden Sie unter Grundlagen der Bedienung. Schließen Sie nur ein LAN-Kabel an die LAN-Buchse an. Wenn Sie ein anderes Kabel anschließen, kann es zu Schäden oder Fehlfunktionen kommen.
Rechte Seite Diese Abbildung zeigt die rechte Seite des Computers. Abbildung 3-3 Rechte Seite des Computers 1 2 1. USB-Anschluss (USB 3.0) 2. USB-Anschluss (USB 2.0) 3. HDMI-Ausgang 3 4 5 6 4. Anschluss für einen externen RGBMonitor 5. Lüftungsschlitze 6. Schlitz für ein Sicherheitsschloss USB-Anschluss (USB Ein USB-Anschluss, der dem USB 3.0-Standard 3.0) entspricht, befindet sich an der rechten Seite des Computers. Der USB-3.0-Anschluss entspricht dem Standard USB 3.0 und ist mit USB-2.
Lüftungsschlitze Die Lüftungsschlitze verhindern das Überhitzen des Prozessors. Schlitz für ein Sicherheitsschloss Ein Sicherheitskabel kann an diesem Schlitz befestigt und dann mit einem Schreibtisch oder einem anderen großen Gegenstand verbunden werden, um einen Diebstahl des Computers zu verhindern. Rückseite Diese Abbildung zeigt die Rückseite des Computers. Abbildung 3-4 Rückseite des Computers Unterseite Diese Abbildung zeigt die Unterseite des Computers.
Akku Der wiederaufladbare Lithium-Ionen-Akku versorgt den Computer mit Strom, wenn kein Netzadapter angeschlossen ist. Nähere Informationen zur Verwendung und zum Betrieb des Akkus finden Sie im Abschnitt Akku. Vorderseite mit geöffnetem Bildschirm Diese Abbildung zeigt den Computer mit geöffnetem Bildschirm. Um den Bildschirm zu öffnen, klappen Sie ihn auf und stellen Sie einen angenehmen Neigungswinkel ein.
Mikrofon Mit dem integrierten Mikrofon können Sie Audiosequenzen in Ihre Anwendungen importieren und aufnehmen. Weitere Informationen dazu finden Sie im Abschnitt Audiosystem und Videomodus. Webcam-LED Die Webcam-LED leuchtet, wenn die Webcam in Betrieb ist. Webcam Eine Webcam ist ein Gerät, mit dem Sie über Ihren Computer Video aufzeichnen oder Fotos aufnehmen können. Sie können es für VideoChats oder Videokonferenzen einsetzen, wenn Sie ein Kommunikationstool verwenden.
Stereolautsprecher Über die Lautsprecher werden der von der verwendeten Software erzeugte Klang sowie die vom System erzeugten akustischen Alarmsignale, zum Beispiel bei niedriger Akkuladung, ausgegeben. Bildschirmscharniere Die Bildschirmscharniere ermöglichen die Positionierung des Bildschirms in einer Vielzahl von angenehmen Betrachtungswinkeln. Ein/Aus-Taste Drücken Sie auf diese Taste, um den Computer ein- oder auszuschalten.
Akku Dieser Computer enthält einen Akku. Versuchen Sie nicht, den Akku selbst herauszunehmen oder zu ersetzen. Wenden Sie sich bei Bedarf an einen autorisierten TOSHIBA Service Provider. Der wiederaufladbare Lithium-Ionen-Akku versorgt den Computer mit Strom, wenn kein Netzadapter angeschlossen ist. Nähere Informationen zur Verwendung und zum Betrieb des Akkus finden Sie im Abschnitt Akku. CPU Der Prozessortyp variiert je nach Modell.
Video-RAM Der Speicher im Grafikadapter des Computers, der zum Speichern des in einer Bitmapanzeige angezeigten Bildes verwendet wird. Die Größe des verfügbaren Video-RAM ist vom Arbeitsspeicher des Computers abhängig. Klicken Sie auf Systemsteuerung -> Darstellung und Anpassung -> Anzeige -> Auflösung anpassen (unter Windows-System in Alle Apps). Sie können die Größe des Video-RAM überprüfen, indem Sie im Fenster „Bildschirmauflösung“ auf die Schaltfläche Erweiterte Einstellungen klicken.
Sie können diese Steuerung folgendermaßen aufrufen: 1. 2. 3. 4. Klicken Sie mit der rechten Maustaste auf den Desktop und wählen Sie Grafikeigenschaften... Klicken Sie auf Energie und dann oben links auf Akku. Klicken Sie unter Display-Stromspartechnologie auf Deaktivieren. Klicken Sie auf Übernehmen. Wenn Sie diese Funktion aktivieren möchten, klicken Sie unter DisplayStromspartechnologie auf Aktivieren.
Gelb blinkend Die Akkuladung ist niedrig. Der Netzadapter muss angeschlossen werden, um den Akku aufzuladen. Gelb Der Netzadapter ist angeschlossen und der Akku wird aufgeladen. Weiß Der Netzadapter ist angeschlossen und der Akku ist vollständig aufgeladen. Leuchtet nicht Unter allen sonstigen Bedingungen leuchtet die Anzeige nicht. Wenn sich der Akku beim Aufladen überhitzt, wird der Ladevorgang unterbrochen und die Anzeige DC IN/Akku erlischt.
Kapitel 4 Grundlagen der Bedienung In diesem Kapitel werden die wichtigsten Funktionen des Computers beschrieben. Hier finden Sie auch Hinweise zu Vorsichtsmaßnahmen. Verwenden des Touchscreens Einige Modelle sind mit einem Touchscreen ausgestattet. Sie können Symbole, Schaltflächen, Menüpunkte, die Bildschirmtastatur und andere Elemente auf dem Touchscreen mit dem Finger bedienen.
Wischen Bewegen Sie Ihren Finger ohne Pause nach dem ersten Aufsetzen schnell vom Bildschirmrand nach innen. Vom linken Rand aus wischen: Zeigt alle geöffneten Apps in der Taskansicht an. Vom rechten Rand aus wischen: Öffnet das Wartungscenter. Vom oberen Rand aus wischen: Zeigt Titelleisten von Apps im Vollbild an. Details und erweiterte Touchscreengesten für die Interaktion mit dem Windows-Betriebssystem sind unter Erste Schritte beschrieben.
Tastatur Die Anzahl der Tasten auf der Tastatur ist davon abhängig, für welches Land/Gebiet der Computer konfiguriert wurde. Es stehen Tastaturbelegungen für verschiedene Sprachen zur Verfügung. Auf der Tastatur befinden sich sechs Tastentypen: Schreibmaschinentasten, Funktionstasten, Softkeys, WindowsSondertasten und Tasten der integrierten numerischen Tastatur. Entfernen Sie nie die Tastenkappen der Tastatur. Dabei könnten Teile unter den Tastenkappen beschädigt werden..
Settings -> Funktionstaste klicken (in der Gruppe TOSHIBA in Alle Apps). Im Sonderfunktionsmodus können Sie Sonderfunktionen nutzen, ohne dass Sie die Taste FN drücken müssen. Sonderfunktionsmodus F1-F12 Standardmodus Funktion F1 FN+F1 Ruft die mit der Software bereitgestellte Hilfedatei auf. F2 FN+F2 Verringert die Helligkeit der LCDAnzeige stufenweise. F3 FN+F3 Erhöht die Helligkeit der LCDAnzeige stufenweise. F4 FN+F4 Ändert das aktive Anzeigegerät.
Sonderfunktionsmodus F1-F12 Standardmodus Funktion FN+2 FN+2 Vergrößert die auf dem Desktop angezeigten Symbole oder die im Anwendungsfenster angezeigte Schriftart. FN +LEERTASTE FN +LEERTASTE Ändert die Bildschirmauflösung. Einige Funktionen zeigen eine Popupbenachrichtigung am Rand des Bildschirms an. Diese Popupbenachrichtigungen sind standardmäßig aktiviert. Sie können sie in der Einstellung „Funktionstaste“ deaktivieren.
Optisches Laufwerk In den Computer ist ggf. ein DVD Super Multi-Laufwerk installiert. Wenn der Computer auf ein optisches Laufwerk zugreift, leuchtet am Laufwerk eine Anzeige. Formate Das Laufwerk unterstützt die folgenden Formate: CD-ROM, DVD-ROM, DVD-Video, CD-DA, CD-Text, Photo CD™ (Single/Multi-Session), CDROM Mode 1/Mode 2, CD-ROM XA Mode 2 (Form1, Form2), Enhanced CD (CD-EXTRA), Addressing Method 2, DVD-R, DVD-RW, DVD+R, DVD +RW, DVD-RAM, DVD-R DL (Format1), DVD+R DL.
3. Legen Sie die Disc mit der beschrifteten Seite nach oben in die Laufwerklade. Abbildung 4-3 Disc einlegen 1 1. Laserlinse Wenn die Laufwerklade vollständig geöffnet ist, ragt das Gehäuse des Computers etwas über die Lade hinaus. Deshalb müssen Sie die Disc beim Einlegen leicht geneigt halten. Nach dem Einpassen muss die Disc jedoch flach in der Lade liegen. Berühren Sie nicht die Laserlinse und den umgebenden Bereich; sie könnte dadurch falsch ausgerichtet werden.
Sie außerdem, bis sich die Disc nicht mehr dreht, bevor Sie sie herausnehmen. 1. Drücken Sie auf die Entnahmetaste, um die Laufwerklade etwas zu öffnen. Ziehen Sie vorsichtig an der Laufwerklade, bis sie vollständig geöffnet ist. Wenn sich die Laufwerklade etwas öffnet, warten Sie einen Augenblick, um sicherzugehen, dass sich die Disc nicht mehr dreht, bevor Sie die Laufwerklade vollständig öffnen. 2. 3. Die Disc ragt leicht über die Seiten der Laufwerklade hinaus, sodass Sie sie leicht greifen können.
CDs CD–Rs lassen sich nur einmal beschreiben. Die aufgezeichneten Daten können nicht gelöscht oder geändert werden. CD-RWs, darunter Multispeed-CD-RWs, Highspeed-CD-RWs und Ultraspeed-CD-RWs, können mehrmals beschrieben werden. DVDs DVD-R, DVD+R, DVD-R DL und DVD+R DL-Discs können nur einmal beschrieben werden. Die aufgezeichneten Daten können nicht gelöscht oder geändert werden. DVD-RW-, DVD+RW- und DVD-RAM-Discs lassen sich mehrmals beschreiben.
Wegen der technischen Einschränkungen bei den aktuellen Laufwerken zum Beschreiben optischer Medien können qualitativ minderwertige Datenträger oder Probleme mit den Hardwaregeräten zu unerwarteten Schreibfehlern führen. Deshalb ist es empfehlenswert, mindestens zwei Sicherungskopien wichtiger Daten zu erstellen, auf die Sie notfalls zurückgreifen können.
DVD+RW: MITSUBISHI KAGAKU MEDIA CO., LTD. (für Medien mit 4-facher oder 8-facher Geschwindigkeit) DVD-RAM: (nur DVD-Super-Multi-Laufwerk) DVD-Spezifikationen für DVD-RAMs für Version 2.0, Version 2.1 oder Version 2.2 Panasonic Corporation (für 3-fach- und 5-fach-Medien) Einige Arten und Formate von DVD-R DL- und DVD+R DL-Discs können möglicherweise nicht gelesen werden. Discs, die als DVD-R DL format4 (Layer Jump Recording) erstellt wurden, können nicht gelesen werden.
Stellen Sie den Computer auf einer geraden Oberfläche ab, die keinen Vibrationen durch Flugzeuge, Züge oder Straßenverkehr ausgesetzt ist. Außerdem sollten Sie den Computer nicht auf eine instabile Fläche stellen. Bringen Sie keine Mobiltelefone oder andere Kommunikationsgeräte in die Nähe des Computers. CyberLink PowerDVD for TOSHIBA Beachten Sie bei der Verwendung von CyberLink PowerDVD for TOSHIBA Folgendes: Hinweise zur Verwendung Diese Software kann nur mit Windows-Betriebssystemen verwendet werden.
Der Bildschirmschoner ist während der Videowiedergabe mit CyberLink PowerDVD for TOSHIBA deaktiviert. Der Computer wechselt nicht automatisch in den Ruhezustand oder Energiesparmodus. Aktivieren Sie nicht die automatische Bildschirmabschaltung, während CyberLink PowerDVD for TOSHIBA ausgeführt wird. Wechseln Sie nicht in den Ruhezustand oder in den Energiesparmodus, wenn CyberLink PowerDVD for TOSHIBA ausgeführt wird.
Starten von CyberLink PowerDVD for TOSHIBA Gehen Sie wie nachstehend beschrieben vor, um CyberLink PowerDVD for TOSHIBA zu starten. 1. 2. Legen Sie eine Video-DVD in das optische Laufwerk ein, während das Betriebssystem ausgeführt wird. Wenn sich eine DVD-Videodisc im DVD-Laufwerk befindet (bei Modellen mit DVD-Laufwerk), startet CyberLink PowerDVD for TOSHIBA möglicherweise automatisch.
Wichtige Sicherheitshinweise zur 3D-Funktion Unterlassen oder beenden Sie das Ansehen von 3D-Filmen, wenn Sie sich dabei unwohl fühlen. Sehen Sie sich bitte keine 3D-Filme an, wenn Sie an Krämpfen, lichtempfindlichen Reaktionen oder Herzkrankheiten leiden. Aufgrund von möglichen Beeinträchtigungen der Entwicklung des Sehvermögens sollten Kinder unter sechs Jahren keine 3D-Filme ansehen.
Laden Sie den Akku bei einer Umgebungstemperatur zwischen 5 und 35 Grad Celsius auf. Andernfalls könnte sich die Akkuleistung sich verschlechtern und die Akkulebensdauer verkürzen oder die elektrolytische Flüssigkeit könnte auslaufen. Aufladen des Akkus Wenn die Leistung des Akkus nachlässt, blinkt die Anzeige DC IN/Akku gelb, wodurch angezeigt wird, dass die Akkuenergie nur noch für wenige Minuten ausreicht.
Der Akku ist fast vollständig entladen. Lassen Sie den Netzadapter in diesem Fall einige Minuten lang angeschlossen; der Akku beginnt dann, sich aufzuladen. Die Anzeige DC IN/Akku zeigt u. U. ein rasches Absinken der Akkubetriebszeit an, wenn Sie den Akku unter folgenden Bedingungen laden: Der Akku war lange Zeit nicht in Gebrauch. Der Akku wurde vollständig entladen und lange im Computer gelassen. Gehen Sie in diesem Fall folgendermaßen vor: 1. 2. 3.
System-Energiesparmodus Ruhezustand des Systems LCD-Abschaltung Festplattenabschaltung Häufigkeit und Dauer der Verwendung der Festplatte und der externen Laufwerke (z. B. optisches Laufwerk) Anfängliche Ladung des Akkus Verwendung von Zusatzgeräten, wie z. B. eines USB-Geräts, die über den Akku mit Strom versorgt werden Aktivierung des Energiesparmodus, wodurch Sie Akkuenergie sparen, wenn Sie den Computer häufig ein- und ausschalten Ort der Speicherung von Programmen und Daten.
3. 4. 5. Verwenden Sie den Computer fünf Minuten lang im Akkubetrieb. Wenn der Akku noch genug Energie für mindestens fünf Minuten Betriebszeit hat, setzen Sie die Verwendung fort, bis der Akku vollständig entladen ist. Wenn jedoch die Anzeige DC IN/Akku blinkt oder Sie auf andere Art über den niedrigen Akkuladezustand informiert werden, fahren Sie mit Schritt 4 fort. Schließen Sie den Netzadapter an den 19-V-Gleichstromeingang (DC IN) des Computer und an eine stromführende Steckdose an.
Wenn Sie den Standard 10BASE-T (10 Mbit/s, 10BASE-T) benutzen, können Sie ein Kabel der Kategorie 3 oder höher verwenden. Anschließen des LAN-Kabels So schließen Sie das LAN-Kabel an: Schließen Sie den Netzadapter an, bevor Sie das LAN-Kabel anschließen. Der Netzadapter muss angeschlossen bleiben, während das LAN verwendet wird. Wenn Sie den Netzadapter abtrennen, während der Computer auf das LAN zugreift, kann das System abstürzen. Schließen Sie nur das LAN-Kabel, keine andere Kabel an die LANBuchse an.
Gegenstände aus Metall, wie z.B. Heft- oder Büroklammern, in das Innere des Computers oder der Tastatur gelangen. Fremdkörper können einen Kurzschluss verursachen, wodurch der Computer beschädigt werden und ein Feuer ausbrechen könnte. Für die Verwendung einer miniSD/microSD-Karte wird ein Adapter benötigt. Beachten Sie bitte, dass nicht alle Speichermedien auf ihre korrekte Funktionsfähigkeit getestet wurden.
SD-Speicherkarten haben eine maximale Kapazität von 2 GB. SDHCSpeicherkarten haben eine maximale Kapazität von 32 GB. SDXCSpeicherkarten haben eine maximale Kapazität von 128 GB. Formatierung von Speichermedien Neue Speicherkarten sind entsprechend bestimmten Standards formatiert. Wenn Sie eine Speicherkarte neu formatieren möchten, verwenden Sie ein Gerät, dass diese Speicherkarte unterstützt. Formatieren einer Speicherkarte Speicherkarten werden nach bestimmten Standards formatiert verkauft.
Weitere Informationen zur Verwendung von Speicherkarten finden Sie in der Dokumentation, die Sie mit der Karte erhalten haben. Hinweise zur Schreibschutzfunktion Speicherkarten verfügen über eine Schreibschutzfunktion. SD-Karte (SD-Speicherkarte, SDHC-Speicherkarte und SDXCSpeicherkarte) Bringen Sie den Schreibschutzschalter in die gesicherte Position, wenn Sie die Aufzeichnung von Daten verhindern möchten. Einsetzen von Speichermedien Die folgenden Anleitungen gelten für alle unterstützten Medien.
Entfernen von Speichermedien Die folgenden Anleitungen gelten für alle unterstützten Medien. So entfernen Sie ein Speichermedium: 1. 2. 3. Klicken Sie in der Windows-Taskleiste auf das Symbol Hardware sicher entfernen und Medium auswerfen. Wählen Sie Speichermedium. Ziehen Sie das Medium vollständig heraus. Wenn Sie das Speichermedium herausnehmen oder den Computer ausschalten, während er auf das Speichermedium zugreift, können Sie Daten zerstören oder das Medium beschädigen.
Abbildung 4-8 Monitorkabel an den Anschluss für einen externen RGB-Monitor anschließen 1 2 1. Anschluss für einen externen RGB- 2. RGB-Kabel Monitor Am Anschluss für einen externen RGB-Monitor befinden sich keine Gewindebuchsen zur Verschraubung des Monitorkabels. Kabel von externen Monitoren, die über Befestigungsschrauben verfügen, können jedoch trotzdem verwendet werden. 2. Schalten Sie den externen Monitor ein.
2. 3. Stecken Sie das andere Ende des HDMI-Kabels in den HDMIAusgang des Computers. Schalten Sie das HDMI-Anzeigegerät ein. Abbildung 4-9 Verbindung mit dem HDMI-Ausgang 1 1. HDMI-Ausgang 2 2. HDMI-Kabel Unter den folgenden Bedingungen sollten Sie ein HDMI-Gerät nicht anschließen oder trennen: Das System startet gerade. Das System wird heruntergefahren. Wenn Sie ein Fernsehgerät oder einen externen Monitor an den HDMIAnschluss anschließen, ist das Anzeigeausgabegerät auf „HDMI“ eingestellt.
Wählen Sie mit der Funktionstaste das korrekte Anzeigegerät aus, bevor Sie das Video abspielen. Ändern Sie die Anzeigeeinstellungen nicht während der Videowiedergabe. Ändern Sie das Anzeigegerät nicht in den folgenden Situationen. wenn Daten gelesen oder geschrieben werden wenn Kommunikationsvorgänge laufen Auswahl des HD-Formats So wählen Sie den Anzeigemodus aus: 1. 2.
Ändern der Anzeigeeinstellungen Nachdem ein oder mehr externe Anzeigegeräte angeschlossen wurden, kann das Betriebssystem die Anzeigeeinstellungen automatisch erkennen, identifizieren und einrichten. Sie können aber auch manuell verwalten, wie die externen Anzeigegeräte verwendet werden sollen, und die Anzeigeeinstellungen ändern, indem Sie P drücken und gleichzeitig die Windows-Taste ( ) gedrückt halten.
Optionales TOSHIBA-Zubehör Um den Computer noch leistungsfähiger und seine Bedienung noch bequemer zu machen, können Sie verschiedene Optionen und Zubehör hinzufügen. Die folgende Liste zeigt einige der Artikel, die Sie bei Ihrem TOSHIBA-Händler erhalten: Universeller Netzadapter Wenn Sie den Computer häufig an zwei Orten benutzen, zum Beispiel zu Hause und im Büro, haben Sie weniger zu tragen, wenn Sie an beiden Orten einen Netzadapter bereithalten.
3. Wählen Sie auf der Registerkarte Verbesserungen die gewünschten Soundeffekte und klicken Sie auf Übernehmen. Realtek HD Audio-Manager Sie können die Audiokonfiguration mit dem Realtek HD Audio-Manager überprüfen und ändern. So starten Sie Realtek HD Audio-Manager: Klicken Sie auf Systemsteuerung -> Hardware und Sound -> Realtek HD Audio-Manager (in der Gruppe Windows-System in Alle Apps). Wenn Sie den Realtek HD Audio-Manager erstmals starten, sehen Sie die folgenden Registerkarten.
2. 3. Doppelklicken Sie auf die Kreisschaltfläche rechts im Hauptbildschirm von Realtek HD Audio-Manager. Wählen Sie eines der Geräte von der Geräteliste aus. DTS Sound DTS Sound™ nutzt erweiterte, patentierte Techniken, um Audio-Cues abzurufen, die im Originalmaterial verborgen sind, und ermöglicht ein intensives Surround-Sound-Erlebnis mit tiefen, satten Bässen und kristallklaren Stimmen. DTS Sound ist nicht bei allen Modellen verfügbar.
Kapitel 5 Utilitys und erweiterte Verwendung In diesem Kapitel werden die Utilitys und Sonderfunktionen dieses Computers sowie die erweiterte Verwendung einiger Utilitys beschrieben. Utilitys und Anwendungen Dieser Abschnitt beschreibt die vorinstallierten Utilitys, die mit dem Computer geliefert werden, und erklärt, wie sie gestartet werden. Weitere Informationen zur Verwendung finden Sie im Onlinehandbuch, in der Hilfe oder ggf. in der Datei README.TXT der einzelnen Utilitys.
CyberLink PowerDVD Diese Software zum Abspielen von DVD-Video for TOSHIBA ist im Lieferumfang enthalten. Um dieses Utility aufzurufen, klicken Sie auf CyberLink PowerDVD for TOSHIBA in Alle Apps. Informationen zur Verwendung von CyberLink PowerDVD for TOSHIBA finden Sie in der Hilfedatei. TOSHIBA Setup Utility Das TOSHIBA Setup Utility ist ein BIOSSetupprogramm mit einer menübasierten Benutzeroberfläche, mit der sich BIOSEinstellungen unkompliziert anzeigen und ändern lassen.
TOSHIBA Service Station Diese Anwendung ermöglicht, dass der Computer automatisch nach Updates für TOSHIBA-Software oder nach anderen wichtigen Informationen von TOSHIBA, die Ihr Computersystem und dessen Programme betreffen, sucht. Wenn diese Anwendung aktiviert ist, überträgt sie eine begrenzte Menge von Systeminformationen an unsere Server. Diese Informationen werden unter strikter Einhaltung der Regeln und Vorschriften sowie geltender Datenschutzbestimmungen behandelt.
TOSHIBA Audio Enhancement TOSHIBA Audio Enhancement verfügt über die Funktionen Audio Source Filtering, Earphone Audio Enhancement und Speaker Audio Enhancement. Um die Einstellungen zu ändern, klicken Sie auf Audio Enhancement in der Gruppe TOSHIBA in Alle Apps. Bluetooth® Link Bluetooth® Link ermöglicht Ihnen, die Tastatur und das Touchpad Ihres Computers als Bluetooth-Tastatur und -Maus zu verwenden.
Je nach Modell verfügen Sie möglicherweise nicht über sämtliche in diesem Abschnitt aufgeführte Software. Sonderfunktionen Bei den folgenden Funktionen handelt es sich entweder um Funktionen, die es speziell bei TOSHIBA-Computern gibt, oder um erweiterte Funktionen, die die Bedienung des Computers erleichtern. Rufen Sie die einzelnen Funktionen wie nachstehend beschrieben auf.
Intelligente Stromversorgung *1 Ein Mikroprozessor in der intelligenten Stromversorgung des Computers prüft den Ladezustand des Akkus, ermittelt automatisch die verbleibende Akkukapazität und schützt die elektronischen Bauteile des Computers auch vor unzulässigen Betriebsbedingungen wie zum Beispiel einer Überspannung aus dem Netzadapter. Diese können Sie in den Energieoptionen festlegen. Energiesparmodus *1 Mit dieser Funktion können Sie den Computer so konfigurieren, dass Akkuenergie gespart wird.
USB-Reaktivierungsfunktion Mit dieser Funktion kann der Computer abhängig von den an die USB-Anschlüsse angeschlossenen externen Geräten aus dem Energiesparmodus reaktiviert werden. Wenn zum Beispiel eine Maus oder eine USBTastatur an einen USB-Anschluss angeschlossen ist, wird der Computer durch Drücken einer Maustaste oder einer Taste auf der Tastatur reaktiviert.
Festlegen (Schaltfläche) Klicken Sie auf diese Schaltfläche, um ein Kennwort zu registrieren. Nach der Einstellung eines Kennworts werden Sie bei jedem Start des Computers zur Eingabe dieses Kennworts aufgefordert. Nachdem Sie das Kennwort eingerichtet haben, wird ein Dialogfeld eingeblendet, in dem Sie die Möglichkeit haben, es auf einem anderen Speichermedium zu speichern. Wenn Sie das Kennwort einmal vergessen sollten, können Sie die Kennwortdatei auf einem anderen Computer öffnen.
Wenn Sie das Festplatten-Benutzerkennwort speichern, fahren Sie den Computer herunter oder starten Sie ihn neu. Andernfalls werden die gespeicherten Daten möglicherweise nicht korrekt eingetragen. Weitere Informationen zum Herunterfahren oder Neustarten des Computers finden Sie unter Einschalten. Supervisorkennwort Wenn Sie ein Supervisorkennwort einrichten, sind einige Funktionen für Benutzer, die sich mit dem Benutzerkennwort anmelden, unter Umständen nur eingeschränkt nutzbar.
TOSHIBA System Settings TOSHIBA System Settings ist das Konfigurationstool von TOSHIBA, das über das Windows-Betriebssystem verfügbar ist. Um TOSHIBA System Settings aufzurufen, klicken Sie auf System Settings in der Gruppe TOSHIBA in Alle Apps. Das Fenster „TOSHIBA System Settings“ enthält mehrere Registerkarten, auf denen bestimmte Funktionen des Computers konfiguriert werden können. Das Fenster enthält auch drei Schaltflächen: OK, Abbrechen und Übernehmen.
einem Neustart des Computers wirksam werden. Starten Sie den Computer sofort neu, um die Änderungen zu übernehmen. TOSHIBA PC Health Monitor Die Anwendung TOSHIBA PC Health Monitor überwacht proaktiv verschiedene Systemfunktionen wie Energieverbrauch, Akkuladezustand (bei Modellen mit Akku) und Systemkühlung und informiert Sie über wichtige Systembedingungen. Die Anwendung erkennt die Seriennummern des Systems und der einzelnen Komponenten und verfolgt bestimmte Aktivitäten und ihre Verwendung.
Sie können TOSHIBA PC Health Monitor jederzeit deaktivieren, indem Sie die Software über Programm deinstallieren in der Systemsteuerung deinstallieren. Dabei werden alle gesammelten Informationen automatisch vom internen Speicherlaufwerk gelöscht. Die TOSHIBA PC Health Monitor-Software verlängert oder ändert die Verpflichtungen von Toshiba im Rahmen der Standardgarantie in keiner Weise. Es gelten die Bedingungen und Einschränkungen der standardmäßigen eingeschränkten Garantie von TOSHIBA.
Netzadapter, Akku (bei Modellen mit Akku), LCD, Lüfter (bei Modellen mit Lüfter), HDD/SSD, Lautstärke, drahtlose Kommunikationsfunktionen und USB), Nutzung der von TOSHIBA bereitgestellten Funktionen/ Anwendungen (das heißt: Einstellungen, Betrieb, Installationsstatus und Anzahl der Aufrufe), Datum der erstmaligen Verwendung des Systems sowie Computer- und Gerätenutzung (das heißt: Energieeinstellungen, Akkutemperatur und -aufladung (bei Modellen mit Akku), CPU, Arbeitsspeicher, Dauer der Hintergrundbeleuch
Kapitel 6 Fehlerbehebung TOSHIBA-Computer sind für den Langzeiteinsatz konzipiert. Sollten trotzdem einmal Probleme auftreten, können Ihnen die in diesem Kapitel beschriebenen Vorgehensweisen bei der Fehleranalyse helfen. Sie sollten sich mit diesem Kapitel vertraut machen. Indem Sie sich potenzielle Probleme bewusst machen, können Sie sie leichter vermeiden. Vorgehen bei der Problemlösung Wenn Sie sich an die folgenden Richtlinien halten, ist es viel leichter, Probleme zu beheben.
Überprüfen Sie, ob im Setup-Programm des Computers alle optionalen Zusatzeinrichtungen richtig konfiguriert und alle erforderlichen Treiber geladen sind (bitte sehen Sie in der jeweils mitgelieferten Dokumentation nach, wenn Sie weitere Informationen zur Installation und Konfiguration benötigen). Überprüfen Sie, ob alle Kabel richtig und fest am Computer angeschlossen sind. Lockere Kabel können zu Signalfehlern führen. Überprüfen Sie alle Kabel auf lose Drähte und alle Anschlüsse auf lose Anschlussstifte.
Software Die Probleme können von Ihrer Software oder dem Datenträger verursacht werden. Wenn Sie ein Softwarepaket nicht laden können, sind möglicherweise die Medien oder das Programm beschädigt. Versuchen Sie in diesem Fall, ein anderes Exemplar der Software zu laden, falls möglich. Wenn eine Fehlermeldung angezeigt wird, während Sie ein Softwareprogramm benutzen, lesen Sie die mit der Software gelieferte Dokumentation.
mehr. Sie können das betroffene Programm schließen, ohne das Betriebssystem oder andere Anwendungen zu beenden. So schließen Sie ein Programm, das nicht mehr reagiert: 1. 2. 3. Drücken Sie gleichzeitig Strg, Alt und Entf (einmal) und klicken Sie dann auf Task-Manager. Das Fenster des Windows Task-Managers wird angezeigt. Wählen Sie das zu schließende Programm und klicken Sie auf Task beenden. Das Schließen des fehlerhaften Programms ermöglicht es normalerweise, die Arbeit fortzusetzen.
2. 3. Halten Sie die entsprechende Taste gedrückt und lassen Sie sie eine Sekunde nach dem Einschalten des Computers los. Folgen Sie den Anweisungen auf dem Bildschirm. Hardware- und System-Checkliste In diesem Abschnitt werden Probleme besprochen, die von der Hardware Ihres Computers oder angeschlossenen Peripheriegeräten verursacht werden.
Problem Vorgehensweise Netzadapter versorgt Überprüfen Sie die Anschlüsse, um den Computer nicht sicherzustellen, dass das Netzkabel/der mit Strom Netzadapter fest an den Computer und eine Strom führende Steckdose angeschlossen ist. Überprüfen Sie den Zustand des Kabels und der Anschlüsse. Ist das Kabel zerschlissen oder anderweitig beschädigt, ersetzen Sie es durch ein neues. Sind die Anschlüsse verschmutzt, reinigen Sie diese mit einem sauberen Baumwolltuch.
Echtzeituhr Problem Vorgehensweise Die BIOSEinstellung und Systemdatum/uhrzeit sind verloren gegangen Die Lebensdauer der Echtzeituhr (RTC) ist abgelaufen. Sie müssen das Datum und die Uhrzeit im TOSHIBA Setup Utility einstellen, indem Sie folgendermaßen vorgehen: 1. 2. 3. 4. Öffnen Sie das TOSHIBA Setup Utility. Weitere Informationen dazu finden Sie im Abschnitt TOSHIBA Setup Utility. Stellen Sie das Datum im Feld System Date ein. Stellen Sie die Uhrzeit im Feld System Time ein.
Problem Vorgehensweise Abdrücke auf dem Bildschirm Möglicherweise haben die Tastatur oder das Touchpad den Bildschirm berührt, während er geschlossen war. Versuchen Sie, die Abdrücke durch vorsichtiges Abwischen des Bildschirms mit einem sauberen trockenen Tuch zu entfernen. Verwenden Sie, falls dies nicht funktioniert, einen hochwertigen LCD-Bildschirmreiniger.
Problem Vorgehensweise Kein Zugriff auf CD/ DVD Disc™ im Laufwerk Überprüfen Sie, ob die Laufwerklade sicher geschlossen ist. Schieben Sie sie vorsichtig nach hinten, bis sie einrastet. Öffnen Sie die Laufwerklade und prüfen Sie, ob die Disc richtig eingelegt wurde. Sie sollte ganz gerade und mit der beschrifteten Seite nach oben liegen. Ein Fremdkörper in der Laufwerklade könnte das Lesen der Disc verhindern. Überprüfen Sie, ob ein Fremdkörper vorhanden ist. Entfernen Sie den Fremdkörper.
Touchpad Problem Vorgehensweise Das Touchpad funktioniert nicht. Überprüfen Sie die Geräteeinstellungen. Klicken Sie auf Systemsteuerung -> Hardware und Sound -> Maus (unter Windows-System in Alle Apps). Bildschirmzeiger Möglicherweise verarbeitet das System gerade reagiert nicht auf die Informationen. Warten Sie einen Moment und Verwendung des bewegen Sie die Maus dann erneut. Zeigegeräts Doppeltippen (Touchpad) funktioniert nicht Verändern Sie die Doppelklickgeschwindigkeit im Mausprogramm. 1. 2. 3.
USB-Maus Problem Vorgehensweise Bildschirmzeiger Möglicherweise verarbeitet das System gerade reagiert nicht auf die Informationen. Warten Sie einen Moment und Verwendung der bewegen Sie die Maus dann erneut. Maus Entfernen Sie die Maus vom Computer und schließen Sie sie an einen freien USB-Anschluss an. Achten Sie darauf, dass sie fest angeschlossen ist. Doppelklicken funktioniert nicht Verändern Sie die Doppelklickgeschwindigkeit im Mausprogramm. 1. 2. 3.
Problem Vorgehensweise USB-Gerät funktioniert nicht Entfernen Sie das USB-Gerät vom Computer und schließen Sie es an einen freien Anschluss an. Achten Sie darauf, dass sie fest angeschlossen ist. Vergewissern Sie sich, dass die USB-Gerätetreiber korrekt installiert sind. Sehen Sie dazu sowohl in der Gerätedokumentation als auch in der Betriebssystemdokumentation nach. Audiosystem Lesen Sie neben den Informationen in diesem Abschnitt auch die Dokumentation, die Sie mit dem Audiogerät erhalten haben.
Problem Vorgehensweise Monitor lässt sich nicht einschalten Wenn Sie überprüft haben, dass der Monitor eingeschaltet ist, überprüfen Sie die Anschlüsse, um sicherzustellen, dass Netzkabel/Netzadapter fest an den Monitor und eine Strom führende Steckdose angeschlossen sind. Keine Anzeige Stellen Sie Kontrast und Helligkeit am externen Monitor richtig ein. Ändern Sie mit der Funktionstaste das aktive Anzeigegerät, sodass nicht das interne verwendet wird.
LAN Problem Vorgehensweise Zugriff auf das LAN ist nicht möglich. Überprüfen Sie die Kabelverbindung zwischen der LAN-Buchse des Computers und dem LAN-Hub. Wake-up on LAN ist nicht funktionsfähig Stellen Sie sicher, dass der Netzadapter angeschlossen ist. Die Funktion Wake-up on LAN benötigt auch dann Energie, wenn das System ausgeschaltet ist. Vergewissern Sie sich, dass der Schnellstart deaktiviert ist: 1. 2. 3. 4. 5.
Bluetooth Problem Vorgehensweise Kein Zugriff auf das Bluetooth-Gerät Vergewissern Sie sich, dass die Funktion für die drahtlose Kommunikation beim Computer eingeschaltet ist. Überprüfen Sie, ob der Bluetooth Manager auf dem Computer ausgeführt wird und ob das externe Bluetooth-Gerät eingeschaltet ist. Es darf kein optional erhältlicher Bluetooth-Adapter im Computer installiert sein. Die eingebaute Bluetooth-Hardware und ein anderer BluetoothController können nicht gleichzeitig verwendet werden.
Kapitel 7 Anhang Technische Daten In diesem Abschnitt sind die technischen Daten des Computers zusammengefasst. Abmessungen Die folgenden Maße und Gewichte berücksichtigen keine Teile, die über das Gehäuse des Computers hinausragen. Die physischen Abmessungen sind modellabhängig. Größe Ca. 380 mm x 259,9 mm x 26,6/26,6 mm (B x T x H) (überstehende Teile nicht eingeschlossen).
Computer 19 V DC Pinbelegung beim Anschluss für einen externen RGBMonitor 5 1 15 11 10 6 Pin Signalname Beschreibung I/O 1 CRV Rotes Videosignal O 2 CGV Grünes Videosignal O 3 CBV Blaues Videosignal O 4 Reserviert Reserviert 5 GND Ground, Erdung 6 GND Ground, Erdung 7 GND Ground, Erdung 8 GND Ground, Erdung 9 +5 V Stromversorgung 10 GND Ground, Erdung 11 Reserviert Reserviert 12 SDA Serielles Datensignal I/O 13 HSYNC Horizontales Sync-Signal O 14 VSYN
Nennstromstärke: Minimum 2,5 Ampere Sicherheitsstandards China: CQC USA und Kanada: UL-gelistet und CSA-zertifiziert Nr. 18 AWG, Typ SVT oder SPT-2 Australien: AS Japan: DENANHO Europa: Österreich: OVE Italien: IMQ Belgien: CEBEC Niederlande: KEMA Dänemark: DEMKO Norwegen: NEMKO Finnland: FIMKO Schweden: SEMKO Frankreich: LCIE Schweiz: SEV Deutschland: VDE Großbritannien: BSI In Europa müssen zweiadrige Netzkabel des Typs VDE, H05VVH2-F oder H03VVH2-F bzw.
Australien Europa AS-zertifiziert Von der entsprechenden Behörde zertifiziert Kanada China CSA-zertifiziert CCC-zertifiziert Informationen zu drahtlosen Geräten Übergreifende Funktionalität der Drahtlostechnologie Die Wireless-LAN-Funktion ist mit anderen LAN-Systemen kompatibel, die auf der Direct Sequence Spread Spectrum/Orthogonal Frequency Division Multiplexing-Funktechnik basieren, und erfüllt die folgenden Standards: IEEE 802.
In Europa: http://www.toshiba-europe.com/computers/tnt/bluetooth.htm Drahtlose Geräte und Ihre Gesundheit Wie andere Geräte, die mit Funk arbeiten, geben auch drahtlose Produkte hochfrequente elektromagnetische Strahlung ab. Die Menge der von drahtlosen Produkten abgegebenen Strahlung ist jedoch erheblich niedriger als die von anderen drahtlosen Geräten, zum Beispiel von Mobiltelefonen, abgegebene elektromagnetische Energie.
Schalten Sie alle Drahtlosfunktionen aus, wenn sich eine Person mit einem Herzschrittmacher oder einem anderen medizinischen elektrischen Gerät in der Nähe befindet. Die Funkwellen können die Funktion des Herzschrittmachers oder Geräts beeinträchtigen und zu schweren Verletzungen führen. Beachten Sie ggf. die Anweisungen zu Ihrem medizinischen Gerät, wenn Sie Drahtlosfunktionen nutzen.
Netzwerkprodukte für den Betrieb im lizenzfreien 2,4-GHz- und 5-GHzBand konzipiert sind, können nationale Vorschriften für den Funkverkehr eine Reihe von Einschränkungen für die Verwendung drahtloser Kommunikationseinrichtungen begründen. Funkfrequenz 5-GHz-Band (5150-5850 MHz) (Revision a und n) 2,4-GHz-Band (2400-2483,5 MHz) (Revision b/g und n) Die Reichweite des Funksignals hängt von der Übertragungsrate für die drahtlose Kommunikation ab.
Die Verschlüsselung verhindert das „Abhören“ und gewährleistet die Vertraulichkeit der Verbindung. Weltweiter Einsatz Der Bluetooth-Funksender und -empfänger operieren im 2,4-GHzFrequenzband. Dieses Band kann lizenzfrei verwendet werden und ist mit den Funksystemen in den meisten Ländern/Gebieten kompatibel. Funkverbindungen Verbindungen zwischen zwei oder mehr Geräten lassen sich unkompliziert herstellen und werden auch dann aufrechterhalten, wenn sich Hindernisse zwischen den Geräten befinden.
Norwegen: Implementiert Dieser Teilabschnitt gilt nicht für das Gebiet in einem Umkreis von 20 km um das Zentrum von NyÅlesund. Russische Föderation: - Nur für den Betrieb in Gebäuden. Eingeschränkte Verwendung der 5150-5350-MHz-Frequenzen in Europa Italien: - Bei der privaten Verwendung ist eine allgemeine Autorisierung erforderlich, wenn WAS/RLANs außerhalb der eigenen Gebäude verwendet werden.
Eingeschränkte Verwendung der 5470-5725-MHz-Frequenzen in Europa Italien: - Bei der privaten Verwendung ist eine allgemeine Autorisierung erforderlich, wenn WAS/RLANs außerhalb der eigenen Gebäude verwendet werden. Luxemburg: Implementiert Allgemeine Autorisierung erforderlich für Netzwerk- und Dienstbereitstellung. Russische Föderation: Eingeschränkt EIRP 100mW. Verwendung nur in Gebäuden, auf geschlossenen Industrie- und Lagergeländen und in Flugzeugen zulässig. 1. 2.
sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. Les dispositifs fonctionnant dans la bande 5,15-5,25GHz sont réservés uniquement pour une utilisation à l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.
Taiwan Artikel 12 Ohne Genehmigung von der NCC darf kein Unternehmen oder Benutzer bei einer zugelassenen Niedrigenergiefunkeinrichtung die Frequenz ändern, die Übertragungsstärke ändern oder die ursprünglichen Merkmale und die Leistung ändern. Artikel 14 Die Geräte der Niedrigenergiefunkeinrichtung dürfen die Sicherheit des Flugverkehrs nicht beinträchtigen und die gesetzliche Kommunikation nicht stören; andernfalls muss der Benutzer den Betrieb sofort unterlassen, bis keine Störung mehr auftritt.
2. Angaben für Wireless LAN Folgende Angaben sind für dieses Gerät zutreffend. (1)(2) (3)(4) (5) 1. 2. 3. 4. 5. 2.4 : Dieses Gerät verwendet eine Frequenz von 2,4 GHz. DS: Dieses Gerät verwendet DS-SS-Modulation. OF: Dieses Gerät verwendet OFDM-Modulation. 4: Der Interferenzbereich dieses Geräts liegt unter 40m. : Dieses Gerät verwendet eine Frequenzbandbreite von 2.400 MHz bis 2.483,5 MHz. Es ist möglich, das Frequenzband von mobilen Objektidentifikationssystemen zu vermeiden. 3.
Intel® Centrino® Wireless-AC 3160 Wireless LAN und Bluetooth Name der Funkeinrichtung: 3160NGW DSP Research, Inc. Zulassungsnummer: D130092003 Atheros QCNFA335 Wireless Network Adapter b/g/n und Bluetooth Name der Funkeinrichtung: QCNFA335 DSP Research, Inc. Zulassungsnummer: D130158003 Atheros QCNFA125 Wireless Network Adapter b/g/n Name der Funkeinrichtung: QCNFA125 DSP Research, Inc.
Rumänien Slowakei Slowenien Spanien Schweden Schweiz Großbritannien USA Rechtliche Hinweise Nicht verwendete Symbole Die Gehäuse von Computern sind häufig so konstruiert, dass alle innerhalb einer Produktserie möglichen Konfigurationen darin untergebracht werden können. Das Modell Ihrer Wahl bietet deshalb unter Umständen nicht alle Funktionen und Spezifikationen, für die sich Symbole oder Schalter am Computer-Gehäuse befinden.
verwenden. Lesen Sie auch die weiteren Informationen, die Sie mit dem Computer erhalten haben. Wenn Sie sich an den technischen Service und Support von TOSHIBA wenden möchten, lesen Sie bitte den Abschnitt TOSHIBA-Support. 64-Bit-Computing Bestimmte 32-Bit-Gerätetreiber und/oder Anwendungen sind möglicherweise nicht mit 64-Bit-CPUs/Betriebssystemen kompatibel und funktionieren deshalb nicht korrekt.
Nach einer gewissen Zeit kann der Akku nicht mehr bis zur vollen Kapazität aufgeladen werden und muss ersetzt werden. Dies gilt für alle Akkus. Wenn Sie einen neuen Akku benötigen, lesen Sie bitte die Informationen zu Zubehörteilen, die Sie mit dem Computer erhalten haben. Kapazität des Festplattenlaufwerks 1 Gigabyte (GB) entspricht 109 = 1.000.000.000 Byte hoch 10. Das Computer-Betriebssystem hat jedoch eine geringere Speicherkapazität von 1 GB = 230 = 1.073.741.824 Byte (Zweierpotenz).
Kopierschutz Die auf einigen Datenträgern enthaltene Kopierschutztechnologie kann eventuell dazu führen, dass Sie auf diesen nicht aufnehmen oder diese nicht anzeigen können. Informationen zu VCCI Klasse B Information (nur für Japan) この装置は、クラスB情報技術装置です。この装置は、家庭環境で使 用することを目的としていますが、この装置がラジオやテレビジョン 受信機に近接して使用されると、受信障害を引き起こすことがあります。 取扱説明書に従って正しい取り扱いをしてください。 VCCI-B OpenSSL Toolkit License Issues LICENSE ISSUES ============== The OpenSSL toolkit stays under a dual license, i.e.
5. 6. Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written permission of the OpenSSL Project. Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit" ( http://www.openssl.
This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. 2. 3. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.
Copyright 1996-2002, 2006 by David Turner, Robert Wilhelm, and Werner Lemberg Introduction ============ The FreeType Project is distributed in several archive packages; some of them may contain, in addition to the FreeType font engine, various tools and contributions which rely on, or relate to, the FreeType Project. This license applies to all files found in such packages, and which do not fall under their own explicit license.
authors (David Turner, Robert Wilhelm, and Werner Lemberg) as the `FreeType Project`, be they named as alpha, beta or final release. `You` refers to the licensee, or person using the project, where `using` is a generic term including compiling the project`s source code as well as linking it to form a `program` or `executable`. This program is referred to as `a program using the FreeType engine`.
-------------Neither the FreeType authors and contributors nor you shall use the name of the other for commercial, advertising, or promotional purposes without specific prior written permission. We suggest, but do not require, that you use one or more of the following phrases to refer to this software in your documentation or advertising materials: `FreeType Project`, `FreeType Engine`, `FreeType library`, or `FreeType Distribution`. As you have not signed this license, you are not required to accept it.
Stichwortverzeichnis A DVD-Super-Multi-Laufwerk schreiben 4-9 verwenden 4-6 Akku Energiesparmodus 5-6 Kapazität überwachen 4-17 E Energiesparmodus automatisch 5-5 einstellen 2-11 Akkuanzeige 3-11 Anzeige „DC IN/Akku“ 3-11 Anzeigemodus 4-31 Externer Monitor Probleme 6-13 ASCII-Zeichen 4-5 Audiosystem Probleme 6-12 F B Bildschirm Anzeige 3-7 automatische Abschaltung 5-5 öffnen 2-5 Scharniere 3-8 Bluetooth 7-7 Festplatte automatische Abschaltung 5-5 G Grafikchip 3-10 H HDMI-Ausgang 3-4 D DC IN Anzei
L USB-Gerät 6-11 USB-Maus 6-11 LAN Kabeltypen 4-19 R RecoveryFestplattenlaufwerk 2-18 Lüftungsschlitze 3-5, 3-9 M Reinigen des Computers 1-14 MultiMediaCard entfernen 4-24 S SD/SDHC/SDXC-Karte formatieren 4-22 Hinweis 4-21 N Netzadapter 19-V-Gleichstromeingang (DC IN) 3-2 anschließen 2-3 zusätzlicher 4-29 Sicherheitsschloss 4-28 Speicherkarte einsetzen 4-23 entfernen 4-24 Neustarten des Computers 2-11 Speichermediensteckplatz 4-20 P Probleme Abschaltung bei Überhitzung 6-5 Akku 6-6 Analyse des Pr
Teileprüfliste 2-1 Touchscreen 4-1 Transport des Computers 1-14 U Umgang mit Datenträgern Speicherkarte 4-22 Umgang mit Karten 4-22 USB-Gerät Probleme 6-11 V Video-RAM 3-10 W Webcam 3-7 Wiederherstellungsmedien 2-16 Z Zeigegerät Touchpad 3-8 Benutzerhandbuch Stichwortverzeichnis-3