Personal Computer User Manual

4-10 User’s Manual
Satellite A660/A660D, Satellite A665/A665D
4. Press gently at the center of the CD/DVD/BD until you feel it click into
place. The CD/DVD/BD should lie below the top of the spindle, flush
with the spindle base.
5. Push the center of the disc tray to close it. Press gently until it locks into
place.
Figure 4-6 Closing the CD/DVD/BD disc tray
■ Slot ODD
To load CD/DVD/BD, follow the steps as listed below and refer to following
figures.
1. When the computer’s power is on, insert CD/DVD/BD into the ODD
directly.
■ Do not touch the laser lens or any portion of its surrounding casing as
this could cause misalignment.
■ Prevent foreign objects from entering the drive. Check the surface of
the disc tray, especially the area behind the front edge of the disc tray,
to make sure there are no such objects before closing the drive.
If the CD/DVD/BD is not seated properly when the disc tray is closed, the
CD/DVD/BD might be damaged. Also, the disc tray might not open fully
when you press the eject button.