Operation Manual
Table Of Contents
- User’s Manual
- Table of Contents
- Preface
- General Precautions
- Chapter 1 - Introduction
- Chapter 2 - The Grand Tour
- Chapter 3 - Getting Started
- Chapter 4 - Operating Basics
- Chapter 5 - The Keyboard
- Chapter 6 - Power and Power-up Modes
- Chapter 7 - HW Setup
- Chapter 8 - Optional Devices
- Chapter 9 - Troubleshooting
- Chapter 10 - Disclaimers
- Appendix A - Specifications
- Appendix B - Display Controller
- Appendix C - Wireless LAN
- Appendix D - AC Power Cord and Connectors
- Appendix E - If your computer is stolen
- Glossary
- Index
8-16 User’s Manual
A350/A350D
Please refer to Chapter 5, The Keyboard, for further details on using hot
keys to change the display setting.
HDMI
The Video data on your computer can be viewed on a TV set. To do so,
connect your computer’s HDMI out port to the TV using the HDMI out
cable.
You can use the hotkeys FN + F5 to change the display device. Refer to
Chapter 5, The Keyboard.
Connecting the HDMI out port
1. Plug one end of the HDMI cable into the HDMI out port of the HDMI
device.
Figure 8-12 Connecting the HDMI out port
2. Plug the other end of the HDMI cable into the HDMI out port on your
computer.
Do not disconnect the external monitor while in Sleep or Hibernation Mode.
Turn off the computer before disconnecting the external monitor.
As the port operation of all HDMI (High-Definition Multimedia Interface)
monitors have not been confirmed, some HDMI monitors may not function
properly.
HDMI Out port
HDMI Cable
When connecting or disconnecting an HDMI device to or from the
computer, only do so when the computer is turned on or when the
computer is completely turned off. Do not do so when the computer is in
Sleep Mode or Hibernation Mode.