User Guide

TOSHIBA
Tough Enough for Today’s World
SOUND BOARD REMOVAL
1. Remove two M2x4 black flat head screws securing the
sound board.
2. Lift out the sound board and disconnect the sound cable
(FMZFL1) from PJ1100 on the sound board.
SECURE DIGITAL(SD) BOARD REMOVAL
FIELD REPLACEABLE UNIT DOCUMENTATION
5000 Series
1. Remove one M2x4 brass screw securing the
SD support plate and the sound FIR board.
2. Remove the SD support plate and lift up the back
side of the sound/FIR board to disconnect it from
PJ601 on the system board.
M2.5x4 black
flat head
screws
Sound
board
Sound
cable
BATTERY BOARD REMOVAL
1. Remove one hex screw securing the battery board.
2. Remove two M2x6 brass screws securing the cpad
cover and lift out the cover.
3. Disconnect the two battery board harness from
PJ1000 and 10001 on the battery board.
4. Lift out the battery board assembly.
RTC REMOVAL
1. Remove the glass tape securing the battery harness
and RTC battery.
2. Disconnect the RTC battery cable from PJ752 on the
system board.
3. Lift the RTC battery out of the slot.
M2x6
brass
screws
Battery harness
Plastic brace
RTC
battery
PJ752 RTC battery cable
M2x4 brass screw
SD support plate
SD board
Hex screw
Satellite
TM