User Guide

100CS 3-53
NOTE: When starting the computer in Resume mode, the last configu-
ration is remembered. If data does not appear on the display you are
using after starting in Resume mode, press Fn+F5. Pressing Fn+F5
changes the display setting as follows: internal LCD to simultaneous to
external CRT.
(f) Text Mode Stretch
Text mode stretch enables a larger display area of 640 x 480 pixels in text
mode. Disabling this function reduces the display area to the standard 640 x
480 pixels.
Enabled Enables the text mode stretch feature. (Default)
Disabled Disables the text mode stretch feature.
3. Hard Disk
This item displays the mode of the HDD for information only. It cannot be
changed.
Enhanced IDE Select this mode when using MS-DOS,
(Normal) Windows or OS/2
®
. (Default)
To see the capacity of the hard disk, use the CHKDSK command. See your DOS
documentation for details on using CHKDSK.
4. Password
This option allows you to set or reset the user password for power on and instant
security.
Registered The user password has been registered.
Not registered The user password has not been registered.
For details on setting the user password refer to your 100CS User’s Manual.
5. I/O ports
This option controls settings for the serial and parallel ports.