User Guide

3-10 100CS
Subtest 05 Memory module
NOTE: To execute this subtest, an optional memory card must be in-
stalled in the computer.
This subtest functions the same as subtest 04, except it is used for testing an
optional memory card. Memory module capacity is 8 MB, 16 MB, and 32
MB.
After selecting subtest 05, the following message will appear:
Extended memory size (1:8 MB,2:16 MB,3:32 MB)?
Select the number that corresponds to the memory card installed in the com-
puter.
Subtest 06 Cache memory
To test the cache memory, a pass-through write-read comparison of ‘5A’ data
is run repeatedly to the test area (‘7000’:’Program’ size to ‘7000’:=7FFF’ (32
KB)) to check the hit-miss ratio (on/off status). One test takes 3 seconds.
Number of misses < Number of hits → OK
Number of misses ≥ Number of hits → Fail