User Guide

100CS 4-19
4.8 Top Cover and Display Assembly
Removing the Top Cover and Display Assembly
To remove the top cover and display assembly, follow the steps below and refer to figures 4-
16 to 4-18.
1. Turn the computer off. Disconnect the AC power cord and all external cables
connected to the computer.
2. Remove the battery pack, optional PC card, optional memory module, HDD,
keyboard, and sub-battery and VGA board as described in sections 4.2 through
4.7.
3. Turn the computer upside down and remove three M2.5x8 silver screws and four
M2.5x6 screws securing the top cover and display assembly.
Figure 4-16 Removing the top cover screws
4. Turn the computer over and lift back the top cover and display assembly so you
can disconnect cables.