User's Manual
47
Questions and Answers (continued)
A
Use the Master PIN code of 1276, then change to a
number of your choice. Ensure that no-one else can
use the Master PIN by removing the Owner’s Manual.
What can be done if the PIN number has
been forgotten?
Q
A
Use a lint free cleaning cloth, similar to the one
provided. Use a non solvent cleaning product.
What is the best way to clean the screen
and bezel?
Q
A
Most AV equipment with CEC link should function
correctly, however only Toshiba products are assured
to work.
Will other manufacturers AV equipment
work with REGZA-LINK (SKY, Home
Cinema etc)?
Q
A
Contact your local dealer or the Toshiba helpline
number.
Where can replacement parts be
purchased?
Q
A
The serial number is located centrally at the rear of
the television. It is also printed on the carton box
supplied.
Where is the Serial number/model name
located?
Q
A
This is the optical Digital Audio output. Avoid contact
with the eyes for any extended period of time.
Why is there a red light on the back of the
television and is it dangerous?
Q
A
As with any device using lamps or similar, the
television will output a certain amount of heat.
Why does the television get hot?
Q
A
These can be plugged into the connections on the
side of television.
How can a camera/camcorder be
connected?
Q
Why are the LEDs on the front of the
television flashing?
Q
LED indication
Condition Solution
LED-3 LED-2 LED-1
Orange
(Solid)
Green
(Solid)
Green
(Solid)
Power ON
On Timer is set
Programme Timer
is set
–
Red
(Solid)
Green
(Solid)
Green
(Solid)
Power ON
On Timer is set
Programme Timer
is working
–
OFF
Green
(Solid)
Green
(Solid)
Power ON
On Timer is set
Programme Timer
is NOT set
–
Orange
(Solid)
OFF
Green
(Solid)
Power ON
On Timer is NOT set
Programme Timer
is set
–
Red
(Solid)
OFF
Green
(Solid)
Power ON
On Timer is NOT set
Programme Timer
is working
–
OFF OFF
Green
(Solid)
Power ON
On Timer is NOT set
Programme Timer
is NOT set
–
Orange
(Solid)
Green
(Solid)
Red
(Solid)
Power OFF (Standby)
On Timer is set
Programme Timer
is set
–
Red
(Solid)
Green
(Solid)
Red
(Solid)
Power ON (Standby)
On Timer is set
Programme Timer
is working
–
OFF
Green
(Solid)
Red
(Solid)
Power OFF
(Standby)
On Timer is set
Programme Timer is
NOT set
–
Orange
(Solid)
OFF
Red
(Solid)
Power OFF (Standby)
On Timer is NOT set
Programme Timer is
set
–
Red
(Solid)
OFF
Red
(Solid)
Power ON (Standby)
On Timer is NOT set
Programme Timer
is working
–
OFF OFF
Red
(Solid)
Power OFF
(Standby)
On Timer is NOT set
Programme Timer is
NOT set
–
OFF OFF
Red
Blinks
Power protect
detection
Turn OFF the TV
and unplug the
power cord. Plug
the power cord in
again and turn
ON the TV
A
Check the table below.