Service Manual

– 28 –
1-1-7. High Static Duct Type
<Single type>
∗ : IEC standard
Model
Indoor unit RAV-SM 1403DT-A 1603DT-A
Outdoor unit RAV-SP 1404AT8-E 1604AT8-E
Cooling capacity (kW) 13.0 (3.3-14.1) 14.3 (3.3-16.0)
Heating capacity (kW) 14.0 (4.2-18.0) 16.0 (4.2-19.0)
Power supply 3 phase 4wired (3N-4pole) 415V 50Hz
Running current (A) 6.89 7.71
Power consumption (kW) 4.32 5.01
Cooling Power factor (%) 87 90
EER 3.01 2.85
Electrical
Energy efficiency class ∗ ( B ) ( C )
Running current (A) 5.48 6.85
characteristics
Power consumption (kW) 3.43 4.43
Heating Power factor (%) 87 90
COP 4.08 3.61
Energy efficiency class ∗ ( A ) ( A )
Maximum current (A) 16.3 16.3
Indoor unit
Appearance Main unit Zinc hot dipping steel plate
Height (mm) 380
Outer dimension Main unit Width (mm) 1050
Depth (mm) 600
Total weight Main unit (kg) 57
Heat exchanger Finned tube
Fan Centrifugal fan
Standard air flow
at 100pa/HH tap
55.0 58.0
(m³/min)
Fan unit
Motor (W) 600
Standard
(Pa) 100
External static
(at HH tap)
pressure
Range
(Pa) 50 – 250
at HH tap
Sound pressure level H (dB•A) 49 50
Sound power level H (dB•A) 64 65
Connecting pipe Drain port VP25
Outdoor unit
Standard length (m) 7.5 7.5
Min. length (m) 3 3
Outer dimension
Max. total length (m) 75 75
Over 30m 40g/m (31m to 75m)
Hight difference
Outdoor lower (m) 30 30
Outdoor high (m) 30 30
Connecting pipe
Gas side (mm) 15.9 15.9
Liquid side (mm) 9.5 9.5
Fan Propeller fan
Fan unit Standard air flow high (m³/min) 103 103
Motor (W) 100 + 100 100 + 100
Sound pressure level Cooling/Heating (dB•A) 51/52 51/53
Sound power level Cooling/Heating (dB•A) 68/69 68/70