User Guide

No.
25
26
Item
PRESET operation
(Wireless remote
controller specific
operations)
Outline of specifications
Start the air conditioner in the operation mode which you want the
remote controller to memorize.
1) Push and hold the PRESET button for more than 3 seconds
while the display flashes.
The mark is indicated and the setting is memorized.
• If you do not push the PRESET button within 3 seconds or if
you push another button, the memory setting is cancelled.
• Operation modes which can be memorized with the PRESET
button are MODE, Temperatures, FAN, TIMER and Hi POWER.
To operate the air conditioner with the setting memorized by the
PRESET button.
1) Push the PRESET button briefly.
The setting memorized will be indicated and the air conditioner
operates with regards to the setting.
• The lamp (green) on the display panel of the indoor unit goes
on, and operation starts after approximately 3 minutes.
• Initial setting:
MODE : AUTO
Temperature : 22°C
Remarks
•[ ] display
27
When you push the QUIET button during cooling, heating, fan only
or AUTO, the air conditioner will start the following operation.
• The fan speed display will indicate AUTO and low speed will be
used.
When the OFF timer is set, 1, 3, 5 and 9 hours appear by turns
every pushing SLEEP button and one of them can be selected for
OFF timer.
•[
] displayQUIET operation
(Wireless remote
controller specific
operation)
SLEEP operation
(Wireless remote
controller specific
operation)
FILE NO. SVM-12004
– 39 –