User Guide

– 83 –
No.
d
e
Part name
Discharge port
cabinet
Side cabinet
Procedure
1. Detachment
1) Perform work of item 1 of c.
2) Remove screws (M4 x 8, 3 pcs.) of
discharge port cabinet for partition plate.
3) Remove screws (M4 (Hexagon) x 10, 2
pcs.) of discharge port cabinet for the
bottom plate.
4) Remove screw (M4 x 8, 1 pc.) of dis-
charge port cabinet for the end plate of
the heat exchanger.
5) Remove the screws (M4 x 8, 2pcs) of
discharge port cabinet and motor base.
6) Remove screws (M4 (Hexagon) x 10, 2
pcs.) of discharge port cabinet for the fin
guard.
2. Attachment
1) Put the upper left side of the discharge
port cabinet on the end plate of the heat
exchanger, and then fix it with screw.
(M4 x 8, 1 pc.)
2) Attach the removed screws to the original
positions.
1) Perform work of item 1 of c.
2) Remove screws fixing the inverter and the
side cabinet. (M4 x 8, 2 pcs.)
3) Remove screws of the side cabinet and
the valve support plate.
(M4 x 8, 2 pcs.)
4) Remove screw of the side cabinet and the
piping panel (Rear).
(M4 (Hexagon) x 10, 1 pc.)
5) Remove screw of the side cabinet and the
bottom plate. (M4 (Hexagon) x 10, 1 pc.)
6) Remove screw of the side cabinet and the
fin guard (Heat exchanger).
(M4 (Hexagon) x 10, 2 pcs.)
Remarks
End plate of the
heat exchanger
Fin guard
Discharge port
cabinet
Bottom plate
Valve support plate
Side cabinet
Inverter assembly
Side cabinet
Piping panel
(Rear)
Valve support
plate