Operation Manual

ManualsBrandsToshiba ManualsAir ConditioningRAS-10UKP2L

12 EN

TOSHIBA RAS-07/10/13UKP (US) 1075000802

Memorize the frequently used operation setting by the MEMO button

for convenience.

Start the air conditioner in the operation mode which you want the

remote control to memorize.

Press the button as follows while the air conditioner is in operation.

1 MEMO button

Press this button briefly to standby memorizing the setting.

All the icons currently displayed except for the clock display and

mark flashes.

2 MEMO button

Press and hold the MEMO button for more than 3 seconds while

the display flashes.

The mark is indicated and the setting is memorized.

• If you do not press the MEMO button within 3 seconds or if you

press another button, the MEMORY setting is cancelled.

• Operation modes which can be memorized with the MEMO button

are MODE, Temperature, FAN, TIMER and Hi POWER.

To operate the air conditioner with the setting memorized by the

MEMO button.

1 PRESET button

Press the PRESET button. The setting memorized with the MEMO

button will be indicated and the air conditioner operates with

regards to the setting.

• The OPERATION lamp (green) on the display panel of the indoor

unit goes on, and operation starts after approximately 3 minutes.

• Initial setting:

MODE : AUTO

Temperature : 22

MEMORY/PRESET OPERATION

PRESET

FAN MODE

Hi-POWER

OFF SET CLR

ECO

AUTO

TIMER

CLOCK CHECKRESET

FILTER

START/STOP

FIX

MEMO

SWING