Manualshelf

User Guide

ManualsBrandsToshiba ManualsLaptopQosmio G40
291292293294295296297298299300
4 Replacement Procedures 4.23 LED board
4.23 LED board
Removing the LED board
The following describes the procedure for removing the LED board (See Figure 4-44).
1. Disconnect the LED cable from the connector on the LED board.
2. Remove the following screw and LED board.
• M2.5×4B FLAT HEAD screw ×1
M2.5x4B FLAT HEAD
LED board
LED cable
Figure 4-44 Removing the LED board
Installing the LED board
The following describes the procedure for installing the LED board (See Figure 4-44).
1. Install the LED board to the base assembly and secure it with the following screw.
• M2.5×4B FLAT HEAD screw ×1
2. Connect the LED cable to the connector on the LED board.
4-60 [CONFIDENTIAL] QOSMIO G40 Maintenance Manual (960-632)