User Guide

4.31 LCD unit/FL inverter 4 Replacement Procedures
2. Peel off the mask seals and mask pads and remove the following screws securing
the LCD mask.
• M2.5×6B FLAT BIND screw ×6
3. Insert your finger between the edge of the LCD mask and LCD and remove the LCD
mask while releasing the latches.
LCD mask
M2.5x6B FLAT BIND
(with mask seal)
M2.5x6B FLAT BIND
(
with mask
p
ad
)
M2.5x6B FLAT BIND
(
with mask
p
ad
)
Figure 4-50 Removing the LCD mask
QOSMIO F30 Maintenance Manual (960-555) [CONFIDENTIAL] 4-71