User’s Manual CAMILEO S20
Introduction Welcome and thank you for choosing a TOSHIBA product. For your convenience, your TOSHIBA product is furnished with two guides: a) a Quick Start Guide, and b) this comprehensive PDF User’s Manual.
Contents Section 1 Getting to Know Your Camcorder......................................... 6 Overview................................................................................. 6 Check the Components......................................................... 6 Safety Instructions................................................................. 7 System Requirements........................................................... 7 Front View.....................................................................
Contents Section 4 Playback Mode..................................................................... 23 Button Function................................................................... 23 LCD Monitor Information..................................................... 24 Operations for Playback Mode .......................................... 25 Movie Playback.................................................................... 26 Picture Playback................................................................
Contents Section 13 Other Information............................................................... 46 TOSHIBA Support................................................................ 46 Operating Environment Conditions................................... 46 Regulatory Information....................................................... 46 Additional Information......................................................... 48 About the battery pack........................................................
Section 1 Getting to Know Your Camcorder Overview The camcorder with 5 Mega Pixel sensor can take H.264 movies. By way of using H.264 technology, more videos can be taken within certain amount of memory. High quality images with up to 16 megapixels can also be delivered smoothly. With a color LCD monitor, users can compose images and examine them easily. The camcorder also features movie recording at an HD resolution of 1920x1080.
Safety Instructions 1. Do not drop, puncture or disassemble the camcorder; otherwise the warranty will be voided. 2. Avoid all contact with water, and dry hands before using. 3. Do not expose the camcorder to high temperature or leave it in direct sunlight. Doing so may damage the camcorder. 4. Use the camcorder with care. Avoid pressing hard on the camcorder body. 5. For your own safety, avoid using the camcorder when there is a storm or lightning. 6.
Front View Macro Switch SD card Cover Lens Microphone Light LCD Panel Rear View Movie Mode LED Indicator Picture Mode LED Indicator Record Button Tele Button (Up Button) OK Button Wide Button (Down Button) Right Button Left Button Playback Button TV Port HDMI Port Mini USB 2.
Side View Speaker Pre-Record/YouTube Direct Button Mode Button Power Button Battery Cover Bottom View Tripod Socket 9 Strap Hook EN
Section 2 Getting Started Loading the Battery Before using the camcorder, users must load the Lithiumion rechargeable battery come within the package. 1. Insert the battery according to the correct polarity marks (+ or -). 2. Close the battery cover firmly. Note Please remove the insulator on battery connection before use. Inserting and Removing an SD Card (Optional) The camcorder comes with an internal memory which allows you to store pictures and movies.
Turning the Camcorder On and Getting Started • To turn on the camcorder: 1. Flip out the LCD panel; the camcorder will turn on automatically. 2. Or press Power Button for one second to turn it on. • To record movies: Press Mode Button to switch to the Movie Record mode. (The Movie Mode LED Indicator will light up.) Press Record Button to record movies. • To take a picture: Press Mode Button to switch to the Picture Record mode. (The Picture Mode LED Indicator will light up.
Section 3 Record Mode Button Function Mode Button: 1. Switch between Movie Mode and Picture Mode. 2. When recording movies, press to capture the image. Record Burron: 1. In Movie Record Mode, press to take movies. To stop recording, press it again. 2. In Picture Record Mode, press to take pictures. Playback Button: 1. Switch between Record / Playback Mode. 2. For quick review, press it after recording. 3. In Record menu, press to exit.
LCD Monitor Information The indicators shown below may display on LCD when movies and pictures are recorded: Movie Resolution FHD (1080p 30) HD (720p 30) WVGA60 VGA (4:3) (1) Slow Motion (Record movies at 320x240(QVGA) resolution.
Pre-Record Mode (5) Time Lapse Scene Skin (6) Night Backlight (7) Macro Position Focusing (8) Manual White Balance (9) Motion Detection Zoom meter: (10) FHD (1080p 30): 1X (1X Digital zoom) Other video resolution: 1X~4X (4X Digital zoom) Digital Light On (11) Light On (12) SD Card Inserted Battery: full power Battery: medium power (13) Battery: low power Battery: empty power DC power mode Note Scene: B/W / Classic / Negative effect can be previewed immediately without indicator on the LCD.
Movie Recording • In Movie Record Mode (The Movie Record LED Indicator lights up), press Record Button to start recording. When a movie is being recorded, a time indicator will display on the LCD monitor. To stop recording, press Record Button again. • Optional function: Dual record: press Mode Button ( icon ( ) appears on the LCD monitor. • Press Playback Button to view the recorded movies. • Four resolution settings are available: ) to capture the image.
Picture Recording • In Picture Record Mode (The Picture Record LED Indicator take pictures. • Press Playback Button to view the picture. • Three resolution settings are available: lights up), press Record Button to Image Quality High Quality: 16 Mega Pixels Standard Quality: 5 Mega Pixels Low Quality: 3 Mega Pixels Taking Close up Pictures/Movies • Slide the macro switch to change the focus range for different distances of objects. • To take close-up pictures: 1.
Options for Record Menu Movie Record Mode Menu Movie Resolution • • • • FHD (1080p 30) HD (720p 30) WVGA 60 VGA (4:3) White Balance • • • • Auto Daylight Fluorescent Tungsten Scene • • • • • • • Auto Skin Night Backlight B/W (Black/White) Classic Negative Effect • • Stabilization Motion Detect.
Movie Resolution Four resolution settings are available. • • • • FHD (1080p 30): Record movies at 1920x1080p 30 resolution. HD (720p 30): Record movies at 1280x720p 30 resolution. WVGA60: Record movies at 848x480p 60 resolution. VGA (4:3): Record movies at 640x480p 30 resolution. Operation Display Screen 1. In Movie Record Mode, press OK Button to show the wheel menu. 2. Use Up/Down Buttons to select [Resolution]. The submenu of Resolution pops up. 3. Press Right Button to enter the submenu. 4.
White Balance The camcorder adjusts the color balance of images automatically. Three manual white balance settings are available: • • • • Auto: The camcorder automatically adjusts white balance. Daylight: Under outdoor condition. Fluorescent: Under fluorescent light condition. Tungsten: Under tungsten light condition. Operation Display Screen 1. In Movie/Picture Record Mode, press OK Button to show the wheel menu. 2. Use Up/Down Buttons to select [White Balance]. The submenu of White Balance pops up. 3.
Movie Effect Operation Display Screen 1. In Movie Record Mode, press OK Button to show the wheel menu. 2. Use Up/Down Buttons to select [Effect]. The submenu of Effect pops up. 3. Press Right Button to enter the submenu. 4. Use Up/Down Buttons to select the desired option, and then press Right Button to enter its option screen. 5. The Movie Effect submenu contains 4 options-- Stabilization, Motion Detection, Slow Motion, and Time Lapse --for you to adjust the camcorder’s settings.
Slow Motion Record videos with slow motion effect. When the video is played, the playback time will be longer than the actual recording time. Operation Display Screen 1. In the Effect submenu, use Up/Down Button to select [Slow Motion]. Then press Right Buttton to enter its option screen. 2. Use Up/Down Buttons to select the desired option. 3. Press OK Button to validate the setting. Time Lapse Record still images at specific intervals you can set and play them as one movie file.
Picture Effect Operation Display Screen 1. In Picture Record Mode, press OK Button to show the wheel menu. 2. Use Up/Down Buttons to select [Effect]. The submenu of Effect pops up. 3. Press Right Button to enter the submenu. 4. Use Up/Down Buttons to select the desired option, and then press Right Button to enter its option screen. 5. The Picture Effect submenu contains 2 options -- Self-Timer and ISO-- for you to adjust the camcorder’s setting.
Section 4 Playback Mode Button Function The Buttons have the following functions in Playback Mode. Mode Button: 1. Switch between Movie Preview Screen and Picture Preview Screen. Record Burron: 1. Press to view the movies/ picture. 2. In Movie Playback Mode, press to play and pause the recorded movies. 3. In Picture Playback Mode, press to start/stop the slideshow. Playback Button: 1. Switch between Record /Playback Mode. 2. Return to the previous screen.
LCD Monitor Information Indicators on the LCD screen while in Playback Mode: Playback Preview Screen Movie Playback Mode Picture Playback Mode Movie Resolution FHD (1080 p30) HD (720 p30) WVGA60 VGA (4:3) (1) Slow Motion (320x240) Picture Resolution High Standard Low Dual Record (The image resolution captured during movies recording is the same as the video resolution.) (2) (3) 0003/0005 Current number/ Total number of picture/movie. Movie playback time counter.
(4) Volume (5) Indicate the screen is in movie playback mode:Play/Pause (6) Press OK Button to go to the Delete option. Press Record Button to start the slide show (7) Press Record Button to stop the slide show (8) Magnification Indicator Operations for Playback Mode The Playback Mode is for viewing and managing movies and pictures on the built-in memory or on an SD Card. Operation 1. Press Playback Button ( mode. Display Screen ) to switch to the Playback 2.
Movie Playback Operation Display Screen 1. When in Movie Playback mode, press Record Button to play/pause the movies. 2. While playing movie, press Right/Left Buttons to fast forward/rewind, then release the button to stop. 3. Use Up/Down Buttons to adjust volume. Note When the LCD is idle for a few seconds, the playback function icons will disappear automatically. Delete Movies Operation Display Screen 1. Use Right/Left Buttons to select the movies. 2. Press OK Button to go to the Delete option. 3.
Picture Playback Operation Display Screen 1. When in the Picture Playback mode, use Right/ Left Buttons to go to the next or previous picture. 2. While the picture is selected, press Tele Button to magnify. (The magnification Indicator appears on the screen) 3. To navigate the magnified picture, press OK Button to enter navigation mode (The inner Magnification Indicator turns red). 4. Use Direction Button to navigate the magnified picture. Press OK Button to exit navigation mode. 5.
Section 5 Setting Your Camcorder Setting Menu Operation Display Screen 1. In Movie/Picture Record Mode, press OK Button to show the wheel menu. 2. Use Up/Down Buttons to select [Setting]. The submenu of Settng pops up. 3. Press Right Button to enter the submenu. 4. Use Up/Down Buttons to select the desired option, and then press Right Button to enter its option screen. 5. The Setting submenu contains 6 options for configuring your camcorder setup.
TV Ensure that the appropriate TV standard of your area is selected – either NTSC or PAL. Wrong TV system setting may cause image flickers. • NTSC(60Hz) standard: USA, Canada, Japan, South Korea and Taiwan, etc. • PAL(50Hz) standard: UK, Europe, China, Australia, Singapore and Hong Kong, etc. Operation Display Screen 1. In the Setting submenu, use Up/Down Button to select [TV]. Then press Right Buttton to enter its option screen. 2. Use Up/Down Buttons to select the desired option. 3.
Time Setting Operation Display Screen 1. In the Setting submenu, use Up/Down Button to select [Time Setting]. Then press Right Buttton to enter time setting screen. 2. Move between Year, Month. Day, Hour and Minute by using Right/Left Buttons. Adjust the numeric value by using Up/Down Buttons. 3. Press OK Button to validate the setting. Or press Playback Button to leave without any change.
Default Setting To restore the default factory setting, select this option. Operation Display Screen 1. In the Setting submenu, use Up/Down Button to select [Default Setting]. Then press Right Buttton to enter the confirmation screen. 2. Use Right/Left Buttons to choose Yes or No. 3. Choosing “Yes” will execute the operation, “No” will cancel the operation. 4. Press OK Button to validate the setting. Or press Playback Button to leave without any change.
Section 6 Viewing Pictures and Movies on TV Connecting to a High-Definition 16:9(Wide) TV 1. Connect the HDMI cable to your camcorder’s HDMI Out port. 2. Connect the other end of the cable to a television. 3. Set the video input source of your TV to “HDMI”. (16:9) 4. The steps for viewing stored pictures and movie on a TV are exactly the same as for viewing them on the LCD monitor. Note The camcorder can not run movie recording and picture taking when it is connected to an HDTV.
Section 7 Viewing Movie & Picture on PC Installing Bundled Software The CD-ROM supplied with this camcorder contains 3 pieces of software. • ArcSoft MediaImpression is a user-friendly application that helps you managing your media, burning your video into DVD, and uploading your videos to YouTube easily. • ArcSoft MediaConverter is a powerful application that converts multiple video formats into compatible format with your camcorder.
Section 8 Burning the Recorded Clip into a DVD The bundled software CD contains ArcSoft MediaImpression which can be used to burn movie clips onto a DVD. You can share this DVD movie with your family or friends by using a regular DVD player. To create a DVD: 1. Install ArcSoft MediaImpression (Refer to Section 7). 2. Click on Windows [Start] g [(All) Programs] g [ArcSoft MediaImpression]. 3. The ArcSoft MediaImpression main screen will appear on your desktop. 4. Click on [Videos].
5. The operation screen will appear: • Select the folder that contains the video files you want to burn. • Select the files in the display area. • Click on [Make Movie] at the bottom menu. 6. Click on [Add Media] ( ) to add the files into slide. 7. Click on [Save/Share].
8. Select [Burn] and click on [Next] to proceed. 9. Click on [Start] to start the VCD/DVD burning. Note Please insert a blank, writable VCD or DVD into the CD/DVD Writer before clicking on [Start].
Section 9 Uploading Video Files to YouTube The built-in YouTube Direct application offers you an easy way to upload your video clips to YouTube instantly. It helps you share them with your family and friends on the YouTube website. Also, the bundled software, ArcSoft MediaImpression, can be used to upload your video clips to YouTube. 9.1 YouTube Direct To upload video files marked with to YouTube: 1. Select the video clips in Movie Playback Mode by pressing YouTube Direct Button . 2.
4. Upload video clips: 1. Press YouTube Direct Button on the camcorder again. 2. The videos clips marked with will be uploaded to the website automatically. (You may be asked to fill in your account information before uploading or you can fill in the information firstly by click on ). 3. Click on “CANCEL” to stop uploading. To upload video files selected manually to YouTube: 1. Follow the step 2 and 3 on page 40. 2. On the thumbnail screen, click on the up/down icon to change the pages.
To playback the video file: 1. Double click on the video clip on the thumbnail screen. 2. Click on the Play/Pause icon thumbnail preview screen. to play/pause. Click on the Return icon to return to the To setup your account information for YouTube: 1. Click on to go to the setup screen. 2. Fill in your account information in the blanks. Then click on “Save”. (If you do not have a account, please sign up on YouTube first.
9.2 ArcSoft MediaImpression To upload video files to YouTube: 1. Install ArcSoft MediaImpression (Refer to Section 7). 2. Click on Windows [Start] g [(All) Programs] g [ArcSoft MediaImpression]. 3. The ArcSoft MediaImpression main screen will appear on your desktop. 4. Click on [Videos]. 5. The operation screen will appear: • Select the folder that contains the video files you want to upload. • Select the files in the display area. • Click on [Upload to YouTube] at the bottom menu.
6. Fill in your YouTube account information in the blanks, and then click on [Login] 7.
Section 10 Video File Converter The bundled software CD contains ArcSoft MediaConverter that features video file converter to convert multiple video formats into compatible format with your camcorder. In this way, you can convert various video files formats and playback your favorite movies on your camcorder. To convert a video file: 1. Install ArcSoft MediaConverter (Refer to section 7). 2. Click on Windows [Start] g [(All) Programs] g [ArcSoft MediaConverter]. 3.
5. Select the video file you want to convert. Then, click on [Open] to convert the file. 6. The converted files will be renamed “IMAG0001.avi”, “IMAG0002.avi”,and so on. 7. Rename the converted file to “IMAGXXXX. avi” before transferring the converted file to your camcorder. (XXXX should be a four figures,e.g. 0001 to 9999) (Please note that the converted file names can not be the same as the ones having existed in your camcorder, otherwise the video files in your camcorder may be overwritten.) 8.
Section 11 Specifications Specification Image sensor 5 Mega pixel CMOS sensor Operation modes Movie record, Picture record Zoom FHD (1080p30):1X (1X Digital zoom) Other video resolution:1X~4X (4X Digital zoom) Shutter Electronic LCD monitor 3” / 7.
Section 12 Troubleshooting Troubleshooting 111 If the LCD preview is not clear while shooting, how can the focus be adjusted? Try to switch between Macro and Normal Mode. 222 The files on the memory card do not display smoothly when the LCD shows the “!” marking. The “!” means the SD card is low speed or is having wrong content inside. The way to solve this condition is to format SD card by the camcorder instead of a PC (Please refer to the detailed Format instruction in Section 5).
Section 13 Other Information TOSHIBA Support Need help? For the latest driver updates, user’s manuals & FAQ’s please have a look at the TOSHIBA options & services support page: computers.toshiba.eu/options-support Please see computers.toshiba.eu/options-warranty for the TOSHIBA hotline numbers.
Medical environment: The compliance to the Medical Product Directive has not been verified by Toshiba, therefore this product cannot be used as a medical product without further verification. The use in usual office environments e.g. in hospitals should be no problem if there is no restriction by the responsible administration. Automotive environment: Please search the owner instructions of the related vehicle for advices regarding the use of this product (category).
Disposal of batteries and/or accumulators The crossed out wheeled dust bin symbol indicates that batteries and/or accumulators must be collected and disposed of separately from household waste. If the battery or accumulator contains more than the specified values of lead (Pb), mercury (Hg), and/or cadmium (Cd) defined in the Battery Directive (2006/66/EC), then the chemical symbols for lead (Pb), mercury (Hg) and/or cadmium (Cd) will appear below the crossed out wheeled dust bin symbol.
0970A9380L-A01S For more information, please visit: www.toshiba-multimedia.
