Owner's Manual

- 22 -
Parameter Initial Value
Transmissive sensor manual threshold fine
adjustment value
1.4 V
Reflective sensor manual threshold fine adjustment
value
1.0 V
Type of character code PC-850
Font of 0 “0” (without slash mark)
Type of control code Auto
Communication speed 9600 bps
Data length QP type 8 bits
QQ type 7 bits
Parity QP type NONE
QQ type EVEN
Transmission control QP type XON/XOFF + READY/BUSY
(DTR) protocol:
(XON output when the power
is on, XOFF output when the
power is off)
QQ type READY/BUSY (DTR)
protocol
Language for LCD messages QP type English
QQ type English
Forward feed standby after an issue ON
Automatic head broken dots check OFF
[FEED] key function FEED
Status response ON
Label pitch 76.2 mm
Effective print length 74.2 mm
Effective print width 216.8 mm
Print type Thermal transfer print mode
Type of sensor Transmissive sensor
Feed speed 4”/sec
Issue mode Batch (without cutting)
PC save automatic call ON
Kanji code TYPE1
Euro code B0H
Centronics ACK/BUSY timing setting
TYPE1
Web printer function OFF
Silent printing function QP type ON
QQ type ON
PCL emulation OFF
Keyboard (KB-80) connection setting OFF
BASIC interpreter function OFF
BASIC trace function OFF
• The total label distance covered, sensor adjustment values (system mode <5>), IP address
setting and data of the flash memory card, are not cleared by RAM clear.