User's Manual

3-38 User’s Manual

PORTÉGÉ M780

3. Close the lid and slide the lock to the lock position.

Figure 3-22 Closing the lid

For details on inserting the Ultra Slim Bay HDD Adaptor II in the computer’s

Ultra Slim Bay slot, refer to Chapter 4, Operating Basics.

External monitor

An external analog monitor can be connected to the external monitor port

on the computer.

Connecting the monitor cable

To connect a monitor, follow the steps as detailed below:

1. Turn the computer’s power off.

2. Connect the monitor cable to the external monitor port and tighten the

screws on the left and right hand side of the connector as required.

Figure 3-23 Connecting the monitor cable to the external monitor port

3. Turn the external monitor’s power on.

4. Turn the computer’s power on.

1. Lid

1. Monitor cable 2. External monitor port