Laptop User Manual

Getting Started

Adding memory (optional)

Do not try to remove a memory module with the computer turned on.

You can damage the computer and the memory module.

Do not remove the memory module while the computer is in Sleep or

Hibernation mode. The computer could hang up the next time you

turn it on and data in memory will be lost. In either of the above

cases, the Sleep configuration will not be saved.

The following screen may appear when you turn on the power:

If “Start Windows

Normally” is highlighted, then press Enter.

If one of the Safe Mode options is highlighted, it is best to press

Enter to go into Safe Mode, then shut down and restart the system, at

which time Windows

should boot back up normally.

When Safe Mode is suggested, this could be a sign that you may

need to scan your internal storage drive for errors or defragment the

drive. If so, consult Windows

Help and Support.

2 Pull the latches away from the memory module.

The memory module pops up slightly.

If your system has the memory modules stacked on top of one

another, you must remove the top module first before

removing/installing the bottom module.

NOTE