User Guide

4 Replacement Procedures 4.6 Slim select bay module

2. Remove the following screws, connector cover and connector from the optical drive

assembly.

• M2.0×6.0S BIND screw ×2

3. Remove the following screw and connector base from the optical drive assembly.

• M2.0×3.0S S-THIN HEAD screw ×1

4. Remove the following screws and ODD side assembly from the optical drive

assembly

• M2.0×6.0S BIND screw ×1

• M2.0×22.0S BIND screw ×1

M2.0×6.0S BIND

M2.0×3.0S S-THIN HEAD

M2.0×6.0S BIND

M2.0×22.0S BIND

ODD side assembly

Connector cover

Connecto

Connector base

Figure 4-9 Detaching the optical drive assembly

4-18 [CONFIDENTIAL] PORTEGE M400 Maintenance Manual (960-541)