Laptop User Manual

Getting Started

Adding memory (optional)

4 Replace the memory module slot cover and secure it using the

screw.

5 Re-insert the main battery. For more information on inserting

the main battery, see “Inserting a charged battery” on page 121.

6 Turn the computer right side up.

7 Reconnect the cables.

8 Restart the computer.

TECHNICAL NOTE: You must have at least one memory module

installed for the computer to work.

Checking total memory

When you add or remove a memory module, you can check that the

computer has recognized the change. To do this:

1 Click Start, Control Panel, System and Maintenance, and

then System.

The System window appears.

2 The total memory is displayed below the System heading

under Memory (RAM).

If the computer does not recognize the memory configuration, turn

off the computer and remove the memory module slot cover

(complete steps 1-8 in “Installing a memory module” on page 53),

and then check that the module is inserted completely into the

socket and lined up squarely with the socket latches.

From time to time, Windows

will display a pop-up that says,

“Windows

needs your permission to continue.” This is a security

feature to prevent programs or people from doing things on your

computer without your permission. If you were trying to perform the

action, click Continue; otherwise, click Cancel. If unsure, cancel and

try again.

NOTE