user manual
4 Replacement Procedures 4.27 Hinge
4.27 Hinge
Removing the Hinge
To remove the hinge, follow the steps below and refer to Figure 4-47.
1. Remove the following screws, washers and hinges on the both sides.
• M2.5×5B FLAT HEAD screw ×2
• M2.5 Washer ×2
2. Remove the following screws and hinge caps on the both sides.
• M2.5×4B FLAT HEAD screw ×2
M2.5×5B FLAT HEAD
Washer
Hinge (right)
M2.5×5B FLAT HEAD
Washer
Hinge cap (right)
Hinge (left)
Hinge cap (left)
M2.5×4B FLAT HEAD
M2.5×4B FLAT HEAD
Figure 4-47 Removing the hinge
4-70 [CONFIDENTIAL] PORTÉGÉ M500 Maintenance Manual (960-559)