user manual

4 Replacement Procedures 4.23 LCD unit/FL inverter

2. Remove the mask seals (2 points), mask rubbers (2 points) and following screws

securing the LCD mask.

• M2.5×6B FLAT HEAD screw ×4

3. Remove the LCD mask (stuck with a double-sided tape) while releasing the latches.

M2.5×6B FLAT HEAD

Mask seal

M2.5×6B FLAT HEAD

Mask rubber

LCD mask

Mask rubber

Figure 4-39 Removing the LCD mask

CAUTION: When releasing the latches, be sure to keep the following steps (order)

referring to the figure on next page.

1. Release the latches from the center toward the outside. ((1))

2. Release the latches from the top toward the bottom. ((2), (3) or (3), (2))

3. Release the latches on the bottom from the left toward the right. ((4))

4-60 [CONFIDENTIAL] PORTÉGÉ M500 Maintenance Manual (960-559)