Maintenance Manual

4 Replacement Procedures 4.19 Power board, Switch board, Touch Pad board
Power board
M2x3 black flat head screw
MMB board
MMB board flat cable
Finger print board
Bluetooth board
Bluetooth board cable
J1
CN2004
CN2005
Button board
Touch pad bracket
M1 6x2 5 white flat head screw..
Touch pad flat cable
Button board flat cable
M2x3 black flat head screw
M2 5x4 black flat head screw.
Figure 4-34 Removing the Power board, Bluetooth card, Button board and Finger print
board
Installing the Power board, Bluetooth card, Button board and Finger print board.
Install the Power board, Bluetooth card, Button board and Finger print board according to
the following procedures and Figure 4-34.
1. Seat the finger print board to the correct position.
2. Seat the button board to the correct position and secure it with two M2x3 black flat
head screws
3. Connect the button board flat cable to J1 on the touch pad.
4. Seat the button board bracket in the correct position and secure it with the three
M2.5x4 black flat head screws.
5. Connect the MMB board flat cable to MMB board.
6. Seat the power board to the correct position and secure it with one M2x3 black flat
head screw.
Satellite E100/E105/ Satellite ProE100/E105 Maintenance Manual 4-51