Maintenance Manual

4.17 LCD Module 4 Replacement Procedures
Satellite E100/E105/ Satellite ProE100/E105 Maintenance Manual 4-45
4.17 LCD Modules
NOTE: ICs are fragile. Use extreme care not to apply pressure to the ICs along the
edges of the LCD module.
NOTE: Dispose of used LCD panels (fluorescent (FL) tubes) as required by local
ordinances or regulations.
NOTE: The LCD/FL cable must be carefully peeled away before disconnecting it from
the module.
Removing the 15.1-inch LCD module
Remove the 15.1-inch LCD module according to the following procedures and Figures 4-
30, 4-31, 4-32.
1. Remove two M2.5x5 black flat head screws on the LCD top cover.
2. Remove the LCD module.
3. Turn the LCD upside down. Be sure to place it on a cushioned surface such as a foam
pad.
4. Remove the tape and LCD/FL cable connector. Then disconnect the LCD/FL cable.