Maintenance Manual

4.18 Switch Cover and Switch board 4 Replacement Procedures
Removing the Switch Cover and Switch Board (for Commercial Model)
Remove the Switch Cover and Switch Board according to the following procedures and
Figure 4-40.
1. Remove the Mylar and EMI tape.
2. Disconnect the switch board flat cables from CN4000 on the switch board.
3. Remove two M2.5x4 black flat-head screws.
Figure 4-40 Removing the switch board
4. Remove the switch board.
Satellite A100/A105 / TECRA A7 Maintenance Manual 4-63