Maintenance Manual

4.15 Display Mask 4 Replacement Procedures
4.15 Display Mask
Removing the Display Mask
Remove the display mask according to the following procedures and Figure 4-33, 4-34.
1. Remove the following 6 seals on the display module in that order:
- Four black seals on the bottom
- Two black seals on the top
2. Remove the following 6 screws on the display module, in that order:
- Two M2.5x6 white flat head screws on the top
- Four M2.5x6 white flat head screws on bottom
3. Release the following 21 latches on the display mask and arrow direction, in that
order :
- Five latches on the left side
- Four latches on the top side.
- Five latches on the right side.
- Seven latches on the buttom side.
M x6 White flat head screw-2.5
Seal
Seal
M x6 White flat head screw-2.5
Display
Figure 4-33 Removing the display mask
Satellite A300/Satellite Pro A300/EQUIUM A300/SATEGO A300 Maintenance Manual 4-51