Maintenance Manual

4 Replacement Procedures Error! Style not defined. Error! Style not defined.
5. Turn the LCD module over and place it face down on a protective surface, such as a foam
pad.
6. Remove the tape and LVDS cable connector. Then detach the LVDS cable.
Figure 4.42 Removing the LVDS cable
NOTE:
Integrated Circuits (ICs) are fragile. Use extreme care not to apply pressure to the ICs along
the edges of the LCD module.
Dispose of used LCD panels (fluorescent (FL) tubes) as required by local ordinances or
regulations.
The LVDS cable must be carefully peeled away before disconnecting it from the LCD panel.
Satellite L500 Maintenance Manual 4-52