Maintenance Manual

2 Troubleshooting Procedures
Satellite T210/T215 Series Maintenance Manual 43
2.18 3G Troubleshooting
START
Perform W indows application test
(Procedure 1)
Was a 3G problem detected?
Perform system info and electric wave check
(Procedure 2)
Replace 3G antenna/unit
Replace system board
END
Yes
3G system is not
faulty. Continue
troubleshooting - refer
to Figure 2.1
No
Figure 2-17 3G troubleshooting process
Notes: 3G Antenna assemble rule as below:
color of antenna Assemble location
Red antenna Main/1
Blue antenna Aux/2
The 3G antenna wire, 3G unit or system board may each be the source of a 3G fault. Any of
these components may be damaged. To determine if the computer’s wireless LAN system is