All in One Printer User Manual

3.BASIC COPY MODES
Selecting Finishing Mode 77
3 BASIC COPY MODES
4
Select the desired stapling position from [FRONT STAPLE], [DOUBLE STAPLE] or
[REAR STAPLE].
5
Select other copy modes as required, and then press the [START] button on the control
panel.
When the number of sheets exceeds the maximum number of sheets available for stapling, this equipment
automatically enters into the sort mode.
 Maximum number of sheets available for stapling
The maximum number of sheets available for stapling differs depending on the paper size and weight.
y 2 cover sheets can be added to paper whose weight is 64 to 256 g/m
2
(17 lb. Bond to 140 lb. Index). In this case,
the number of sheets available shall include the 2 cover sheets.
y For the maximum number of sheets loadable on the tray, refer to the Quick Start Guide.
Paper size
Paper weight
64 - 80 g/m
2
(17 - 20 lb. Bond)
81 - 90 g/m
2
(21 - 24 lb. Bond)
91 - 105 g/m
2
(25 - 28 lb. Bond)
A4, B5, LT 50 sheets 50 sheets 30 sheets
A3, A4-R, B4, FOLIO, LD,
LG, LT-R, COMP
30 sheets 30 sheets 15 sheets