All in One Printer User Manual

5.IMAGE ADJUSTMENT

Using Image Adjustment Functions 155

5 IMAGE ADJUSTMENT

Select a color for the black part in the original.

1) Press [CHANGE BLACK TO].

2) Select the desired color.

After selecting the color, press [OK]. This is the end of the setting.

If you want to adjust the color balance, press [ADJUST] and go to the next step.

y When the two colors specified are the combination of black and a color other than black, color balance

adjustment is enabled. When neither of the two colors is black, or when both of the two colors are black, this

adjustment is disabled.

y The color balance of a color other than black can be adjusted.

Press or of the color to obtain the desired color balance.

After completing the adjustment, press [OK]. This is the end of the setting.

If you want to adjust each color balance on every density area, press [DETAIL] and go to the next step.