Copier User Manual

1 BEFORE USING EQUIPMENT

56 Preparation 1- Turning Power On/Off

See the User Functions Guide to change the default settings noted above.

The equipment can also be made to enter the sleep mode manually by means of the following

procedure.

Press the [SLEEP] button on the touch panel.

The equipment enters into the sleep mode. During this mode, the display on the touch

panel disappears and the [ENERGY SAVER/SHUTDOWN] button lights in green.

To cancel the energy saving mode

Press the [START] button on the control panel. The sleep mode is cleared and the equipment

will be ready for copying.

The sleep mode is also cleared by pressing any button of [ENERGY SAVER / SHUTDOWN],

[COPY], [SCAN], [FAX] and [e-FILING].

Press the [ENERGY SAVER/

SHUTDOWN] button on the

control panel.