Copier User Manual

1 BEFORE USING EQUIPMENT

32 Description of Each Component

Description of Each Component

Front / Right side

1. Reversing Automatic Document Feeder (Optional, MR-3018)

A stack of originals placed on this are scanned one sheet by one. Both sides of original can

be scanned. Maximum 100 sheets (20 lb. Bond), 80 sheets (28 lb. Bond) (or stack height

0.62") of originals can be placed in one go.

(The maximum number of sheets may vary depending on the media type of the originals.)

 P.76 “Using the Reversing Automatic Document Feeder (optional)”

 P.324 “Misfeed in the Reversing Automatic Document Feeder (optional)”

2. Operator’s Manual pocket (Back side)

Keep the Operator’s Manual in this.

3. Automatic duplexing unit

This is a unit to make copies on both sides of paper. Open it when paper jams occur.

 P.330 “Misfeed in the automatic duplexing unit”

4. Bypass tray

Use this to make copies on special media types such as overhead transparencies, water-

proof paper.

 P.89 “Bypass copying”

 P.329 “Misfeed on the bypass tray”

5. Paper feed cover

Open this cover when releasing a paper misfeed in the drawer feeding area.

 P.327 “Misfeed in drawer feeding area”