Copier User Manual

7 TEMPLATE
246 Registering User Groups and Templates
4
Press the [NAME] button, and then enter the user group name.
When the [NAME] button is pressed, the letter entry menu ( P.46) is displayed. Up to
20 letters can be entered.
5
Press the [USER NAME] button, and then enter the user name of
the user group as required.
When the [USER NAME] button is pressed, the letter entry menu ( P.46) is displayed.
Up to 30 letters can be entered.
To set the password, proceed to step 6. If not, skip to step 8.
6
Key in the password in “Password” as required, and then press the
[SET] button.
y Be sure to key in the 5-digit password.
y * (asterisk) is displayed in “Password” when the password is entered.
y To correct the entered password, press the [CLEAR] button on the control panel.
y When the [SET] button is pressed, “Retype Password” becomes highlighted.