Copier User Manual

“Check paper size setting on control panel for drawer N” 377
9
Place the paper removed in step 3 in the drawer.
10
Press the [USER FUNCTIONS] button to return to the basic menu.
Set the original and start the copying again.
When “POWER FAILURE” appears, press the [FUNCTION CLEAR] button twice to clear
the message. See  P.372 ““POWER FAILURE”” for details.
During copying (using the bypass tray)
2
Remove the jammed paper.
 P.324 “Jam Symbols”
1
Turn the power of the equip-
ment OFF.
You cannot shut down the equipment.
3
Remove all the paper from the
bypass tray.
4
Turn the power ON.