User manual

User’s Manual 3-3
Getting Started
Opening the display
The display panel can be rotated in a wide range of angles for optimal
viewing.
To open the display, lift the panel up and adjust it to the best viewing angle.
Figure 3-3 Opening the display panel
Turning on the power
This section describes how to turn on the power
1. If the external diskette drive is connected, make sure it is empty. If a
diskette is in the drive, press the eject button and remove the diskette.
2. Open the display panel.
3. Press and hold the computer’s power button for two or three seconds.
Figure 3-4 Turning on the power
While you open the display, hold the base of the computer to avoid raising
it.
After you turn on the power for the first time, do not turn it off until you have
set up the operating system (OS) and the OS has started up
.
POWER BUTTON