Instruction Manual

Installing Software
Windows® 2000 Server
174
Selecting a driver for the IDE RAID controller
To select the driver, follow these steps.
1
Press the <F6> key after the Windows 2000 Server Setup win-
dow has turned entirely to blue.
2
When a message appears on the screen, asking whether you
want to add a device driver for mass storage device, press the
<S> key.
3
Insert the LSI Logic IDE RAID Windows 2000 Driver floppy
disk into the floppy disk drive, and then press the <Enter> key.
4
When the following message appears, select “LSI Logic
MegaRAID IDE 100 Driver For MAGNIA Z500(Windows
2000)”, and then press the <Enter> key.
Selecting a driver for the SCSI Host Adapter
To select the driver, follow these steps.
1
Press the <F6> key after the Windows 2000 Server Setup win-
dow has turned entirely to blue.
2
When a message appears on the screen, asking whether you
want to add a device driver for mass storage device, press the
<S> key.
3
Insert the Adaptec SCSI Windows 2000 Driver floppy disk
into the floppy disk drive, and then press the <Enter> key.
LSI Logic MegaRAID IDE 100 Driver For MAGNIA Z3x0
(Windows NT)
LSI Logic MegaRAID IDE 100 Driver For MAGNIA Z3x0
(Windows 2000)
LSI Logic MegaRAID IDE 100 Driver For MAGNIA Z500
(Windows NT)
LSI Logic MegaRAID IDE 100 Driver For MAGNIA Z500
(Windows 2000)