Instruction Manual
System Configuration Setup
BIOS setup utility
143
Starting the setup utility
The BIOS screen will appear when the server is started.
To start the BIOS Setup Utility, press the F2 key immediately after
the BIOS screen appears. The message “Entering Setup...”
appears on the screen. After the system completes the Power-On-
Self-Test (POST), the BIOS Setup Utility is loaded.
NOTE: If F2 is not pressed, the operating system is loaded
after the Power-On-Self-Test (POST) sequence is completed.
Phoenix BIOS X.X Release X.X.X
Copyright 1985-2002 Phoenix Technologies Ltd.
All Rights Reserved
TOSHIBA IA Server BIOS Version XX.XX.XX
CPU = x - Intel(R) Xeon(TM) CPU XXX GHz
XXXXM System RAM Passed
XXXX Cache SRAM Passed
System BIOS Shadowed
Video BIOS Shadowed
ATAPI CD-ROM:XXXX
Mouse initialized
Press <F2> to enter SETUP