Cash Register User Manual

6. TERMINAL FILE PROGRAMMING

EO3-11106

6.38 Drawer Warming Time Setting

6-159

6.38 Drawer Warning Time Setting

This operation sets the number of seconds as the period of time for the cash drawer remaining open until the

alarm buzzer is generated to warn operator to close the drawer.

Any time outside a sale

Mode Lock: SET

1) Menu Tree

2) Operation Flowchart

Main Menu

ECR is being outside a sale and in SET mode.

Depress [↓] five times then [Enter].

Depress [6].

“6 OTHER” is selected.

Depress [↓] four times then [Enter].

Depress [5].

“5 DRW WARNING TIME” is selected.

Input a numeriv value of time to start

the drawer warning buzzer.

Max. 2 digits: 1 to 99 (seconds)

[End]

This programming is ended. A long receipt is issued and the

display returns to Main Menu screen.

NOTES:

1. The value of 0 second cannot be set. (To cancel the drawer warning function, reset the warning option

itself.)

2. After a RAM Clear, the value of 15 seconds is set as the default setting.

3. The setting here is effective only when the following are both selected in the system option programming:

Address No. 27 - Bit No. 1 SET: Drawer-close compulsory

Address No. 27 - Bit No. 2 SET: Drawer warning alarm ACTIVE

4. The drawer warning error is cleared only by closing the drawer. This error cannot be cleared by turning the

Mode Lock to any position.

5. The drawer warning time is processed only in REG, MGR, and – modes.

OPERATION

CONDITION