User's Manual

77
English
CONTROLS AND FEATURES
System Information and Reset
TV
This feature can be used to check the version of software
currently installed. When in DTV mode, it includes
additional diagnostic information such as signal strength,
signal quality, centre frequency, modulation, etc.
a In the Get Help menu, press B / b to select
System Information.
b Press OK to display the System Information.
c For information about the signal quality of a
particular multiplex, press
B / b to select that
multiplex.
d Press OK for a screen showing detailed technical
information about the selected multiplex.
Selecting Reset TV will reset all TV settings, including
saved channels, to their original factory values.
a In the Installation menu, press B / b to select
Reset TV.
b Press OK to select. A screen will appear warning
that all settings will be lost. Press OK to continue.
When the set powers back on, the Quick Setup
screen will appear. Press OK to advance the setup
and perform an auto tune. (See “Quick Setup”
section on page 16.)
PC Settings
Connect the PC (as shown in the ‘Connecting a computer’
section) and ensure that a picture is showing on the
television screen. The picture position may now be
adjusted to suit personal preference.
a Press and B / b to highlight Picture icon.
b Press c and B / b to select Display Settings and
press OK.
c Press B / b to select PC Setting and press OK.
d Press B / b to select an option and press C / c to
adjust the settings.
The Clock Phase matches the PC signal with the LCD
display. Adjusting this can clear horizontal stripes and
picture blur.
a In the Display Settings menu, press B / b to
select PC Settings and press OK.
b Press B / b to select Clock Phase.
c Press C / c to adjust until the picture clears and
press OK.
System Information
Reset TV
System Information
TOSHIBA
2014 - 048
Oct 27 2014
Software Version : xxxxxxxx
MBOOT Version : xxxxxxxx
Shipout : B
Country : UK
Ch67
WEAK
AVERAGE
STRONG
POOR
Ch37
WEAK
AVERAGE
STRONG
Ch33
WEAK
AVERAGE
STRONG
Ch48
WEAK
AVERAGE
STRONG
Horizontal and Vertical Position
Clock Phase
Auto Format On
4:3 Stretch Off
Picture Position
PC Settings
< Display Settings
< PC Settings
Horizontal Position 0
Vertical Position 0
Clock Phase 0
Sampling Clock 0
Reset